Help with converting long pump accessory setup to short pump. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MarkMark · 02-03-2009, 07:00 PM

I have a 73 -up BB motor with all the long pump accessories in my 72. I am wanting to convert to a short pump with the alternator on the driver side. I know this will require a short pump with short accessories. Will I have to change the power steering and crank pulley also? What all am I looking at to fully swap over? I will be installing a vintage air kit before summer hits, and I would like the compressor to be mounted on the passenger side. It just looks much cleaner to me.

thanks.

JimKshortstep4x4 · 02-03-2009, 09:19 PM

I would suggest getting all of the parts as the ones you have will need to be replaced.

Here is a link to a post on the parts board where the parts you need are for sale.

http://67-72chevytrucks.com/vboard/s...d.php?t=326543

Jim

jbristo67 · 02-03-2009, 09:35 PM

Can you run a serp setup on a big block

MarkMark · 02-21-2009, 07:15 PM

I now have all the parts to complete the changeover.(thanks leddzepp)
any one have any pics of how all the brackets mount? thanks

02-03-2009, 07:00 PM	#1
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	Help with converting long pump accessory setup to short pump. I have a 73 -up BB motor with all the long pump accessories in my 72. I am wanting to convert to a short pump with the alternator on the driver side. I know this will require a short pump with short accessories. Will I have to change the power steering and crank pulley also? What all am I looking at to fully swap over? I will be installing a vintage air kit before summer hits, and I would like the compressor to be mounted on the passenger side. It just looks much cleaner to me. thanks.

02-03-2009, 09:19 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Help with converting long pump accessory setup to short pump. I would suggest getting all of the parts as the ones you have will need to be replaced. Here is a link to a post on the parts board where the parts you need are for sale. http://67-72chevytrucks.com/vboard/s...d.php?t=326543 Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-03-2009, 09:35 PM	#3
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: Help with converting long pump accessory setup to short pump. Can you run a serp setup on a big block Last edited by jbristo67; 02-03-2009 at 09:37 PM.

02-21-2009, 07:15 PM	#4
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	Re: Help with converting long pump accessory setup to short pump. I now have all the parts to complete the changeover.(thanks leddzepp) any one have any pics of how all the brackets mount? thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.