Anyone tried this Bolt in C-Notch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smh292 · 02-03-2009, 09:26 PM

I found this from the ad on this forum. Anyone used it? I read that the CPP ones fit the best. Just trying to see what my options are. Thanks

http://www.performanceonline.com/sto...cat=454&page=1

SCOTI · 02-03-2009, 09:32 PM

Find out if the pic is accurate or if it's a 'generic' pic that possibly varies from the real part. If that's their real part, it's the same as CPP's & should work fine.

*Shane* · 02-03-2009, 09:35 PM

I'm with Scoti ... looks like the CPP notch.

if you call CPP when you're ready to order and tell them you saw their add in Custom Classic Trucks / Classic Trucks where it's advertised for $99 plus shipping.

smh292 · 02-03-2009, 09:43 PM

Thanks for the info guys. That $99 deal sounds pretty good

02-03-2009, 09:26 PM	#1
smh292 Registered User Join Date: Aug 2005 Location: Phoenixville PA Posts: 197	Anyone tried this Bolt in C-Notch? I found this from the ad on this forum. Anyone used it? I read that the CPP ones fit the best. Just trying to see what my options are. Thanks http://www.performanceonline.com/sto...cat=454&page=1 __________________ www.diverserides.com WTB 67-68 SWB, 350, Auto, Coil frame, Discs up front - PM me with details

02-03-2009, 09:32 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: Anyone tried this Bolt in C-Notch? Find out if the pic is accurate or if it's a 'generic' pic that possibly varies from the real part. If that's their real part, it's the same as CPP's & should work fine. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 02-03-2009 at 09:33 PM.

02-03-2009, 09:35 PM	#3
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Anyone tried this Bolt in C-Notch? I'm with Scoti ... looks like the CPP notch. if you call CPP when you're ready to order and tell them you saw their add in Custom Classic Trucks / Classic Trucks where it's advertised for $99 plus shipping.

02-03-2009, 09:43 PM	#4
smh292 Registered User Join Date: Aug 2005 Location: Phoenixville PA Posts: 197	Re: Anyone tried this Bolt in C-Notch? Thanks for the info guys. That $99 deal sounds pretty good __________________ www.diverserides.com WTB 67-68 SWB, 350, Auto, Coil frame, Discs up front - PM me with details

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.