|
02-04-2009, 02:00 AM
|
#1 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Harness Bar
Has anyone ever made or installed a harness bar behind the seat? I removed the stock tank, but am keeping the bench seat for now. I am looking for a secure way to mount up two 5 point harnesses.
|
|
|
|
02-04-2009, 11:23 PM
|
#2 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Harness Bar
Anyone have a good idea?
|
|
|
|
|
02-04-2009, 11:47 PM
|
#3 |
|
Registered User
Join Date: Aug 2001
Location: Jesup, GA
Posts: 571
|
Re: Harness Bar
This is how I did mine...
|
|
|
|
|
02-04-2009, 11:53 PM
|
#4 |
|
THE DAMN YANKEE
Join Date: Sep 2006
Location: Southern MD
Posts: 551
|
Re: Harness Bar
if it's not got to be nhra legal you can weld a 5"x5" plate with a tab on it to the inner cab panel below the window on each side and hook your shoulder harnesses to it. the one above looks nice and neet. top tank mounts should be more than strong enough too. Very Nice 383 Stroker
Last edited by phipp13; 02-04-2009 at 11:56 PM. |
|
|
|
|
02-05-2009, 12:02 AM
|
#5 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Harness Bar
Cool idea thanks 383 stroker. I didn't know those would be strong enough.
|
|
|
|
|
02-05-2009, 09:58 AM
|
#6 |
|
Registered User
Join Date: May 2003
Location: Ontario
Posts: 279
|
Re: Harness Bar
383 did you ever have a problem with Tech at the track with the belts mounted there.I was looking at doing the same thing but wasn't sure if they would pass it.Just looking at the rule book looks like it would be down lower than the 4 inch requirement of the shoulder harness
Last edited by Ont67shortbox; 02-05-2009 at 10:51 AM. |
|
|
|
|
02-05-2009, 10:42 AM
|
#7 | |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Harness Bar
Quote:
|
|
|
|
|
|
02-05-2009, 06:07 PM
|
#8 | |
|
Registered User
Join Date: Aug 2001
Location: Jesup, GA
Posts: 571
|
Re: Harness Bar
Quote:
Last edited by 383 Stroker; 02-05-2009 at 06:22 PM. |
|
|
|
|
|
02-06-2009, 12:14 AM
|
#9 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Harness Bar
Ok that will probably be the same thing for me
|
|
|
|
|
02-10-2009, 10:15 AM
|
#10 |
|
Registered User
 
Join Date: Mar 2008
Location: tyler texas
Posts: 1,538
|
Re: Harness Bar
Before I had a cage in my truck I just ran the shoulder harness all the way to the floor . It should pass tech fine as long as you use good hardware including some large od washers to strengthen it . As far as the lap belts go I still use the factory mounts with grade 8 bolts and washers .
__________________
NHRA Super Street 469C It only runs 10.90 at 156 mph |
|
|
|
|
02-10-2009, 12:22 PM
|
#11 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Harness Bar
cool
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
