The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-08-2009, 12:23 PM   #1
71slowroller
Registered User
 
Join Date: Jan 2008
Location: Macon, GA
Posts: 12
Fuel sender question.

short version
I have a 71 c10 that came stock with a 350 engine. I'm new to Chevys so this could be a dumb question but I need to know if I need to buy a 4bbl or 2 bbl fuel sending unit so I can get my truck back on the road.

Long Version
I aquired a 71 c10 that has a great drive train but everything else was pretty much garbage (except the body). I replaced all the axle seals, brake lines calipers roters drums pads shoes and installed a booster. I finally got it rolling, insured and put a tag on it and the thing conks out on me about 20 feet from my drive way. This truck has been my buddy every since knowing it could have gave up waaaay beefore I got home.

The issue. Old gas, rusty tank, and sending unit. I've got the tank cleaned lined and ready to go back in, but I can't figure out if I need a 4bbl or 2 bbl sending unit. It came stock with a 350 engine.

Thanks for the help.
Rod
71slowroller is offline   Reply With Quote
Old 02-08-2009, 12:30 PM   #2
68gmsee
Active Member
 
68gmsee's Avatar
 
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
Re: Fuel sender question.

I didn't know there was a difference... Only differences I've seen is that vented non vented and the six cylinder or v8 ones. V8 has a larger diameter tube if I remember correctly.
68gmsee is offline   Reply With Quote
Old 02-08-2009, 12:33 PM   #3
68gmsee
Active Member
 
68gmsee's Avatar
 
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
Re: Fuel sender question.

Here's GMCPaul's site on them. He's a local vendor. There are others that suport the site also.

http://www.gmcpauls.com/fuel_tank_&_related.htm
68gmsee is offline   Reply With Quote
Old 02-08-2009, 12:48 PM   #4
71slowroller
Registered User
 
Join Date: Jan 2008
Location: Macon, GA
Posts: 12
Re: Fuel sender question.

Quote:
Originally Posted by 68gmsee View Post
I didn't know there was a difference... Only differences I've seen is that vented non vented and the six cylinder or v8 ones. V8 has a larger diameter tube if I remember correctly.
I wanted to assume that the 6 cylinder ones were probbably 2 bbl and the v8 was 4bbl but I didn't know. After visiting the local parts store and seeing about 5 different varioations I didn't want to chance it. Don't have a lot of cash to spend on restocking fees and shipping back parts...
71slowroller is offline   Reply With Quote
Old 02-08-2009, 12:49 PM   #5
71slowroller
Registered User
 
Join Date: Jan 2008
Location: Macon, GA
Posts: 12
Re: Fuel sender question.

Quote:
Originally Posted by 68gmsee View Post
Here's GMCPaul's site on them. He's a local vendor. There are others that suport the site also.

http://www.gmcpauls.com/fuel_tank_&_related.htm

Thanks for the link, it was actually a few dollars cheaper than LMC!
I didn't expect such a quick response either, you guess get an A for Awsomeness.
71slowroller is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com