|
02-16-2009, 12:23 PM
|
#1 |
|
Registered User
Join Date: Oct 2004
Location: Nor Cal
Posts: 75
|
Power steering box
I Plan on converting to P/S. A guy I bought some parts for about a year ago thew in this box and pump for nothing. My question is, Is there a way I can make sure it will fit before I start to tear down? ie: cast #, Fitting type etc... It has a cast # 7802644 Are 4x4 and 2wd boxes the same?
Thanks
__________________
--------------------------------- 72 C10 SWB 350 Work in progress 98 HD Fatboy 09 HD Heritage Softail 05 Honda Element Last edited by mdazb; 02-16-2009 at 03:50 PM. |
|
|
|
02-16-2009, 04:48 PM
|
#2 |
|
Senior Member
 
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,494
|
Re: Power steering box
2wd and 4wd are different in the way the pitman arm points. I don't believe they can be swapped from one to the other. As long is it is pre 1978 or so,the fittings will be standard, not metric. I have swapped a few boxes from early- mid 70's trucks onto 68-72 trucks with no problems. I also helped swap a 1984 box with metric fittings onto a 1968 that had a 1997 Vortec 350 engine swapped in with the 1997 serpentine front drive.
|
|
|
|
|
02-16-2009, 06:30 PM
|
#3 |
|
Registered User
Join Date: Oct 2004
Location: Nor Cal
Posts: 75
|
Re: Power steering box
How can you tell if it's "pre-1978"?
__________________
--------------------------------- 72 C10 SWB 350 Work in progress 98 HD Fatboy 09 HD Heritage Softail 05 Honda Element |
|
|
|
|
02-16-2009, 07:06 PM
|
#4 |
|
Registered User
Join Date: Jun 2008
Location: Norway
Posts: 90
|
Re: Power steering box
What kind of fittings were used before and after 78? I am working on hydroboost setup on a 67.
__________________
67 c10 Short Step 350/th400 daily driver 69 Camaro work in progress 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
