did the factory put down sound deadener? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim21391 · 02-20-2009, 12:59 AM

well i had a bunch of gunk on my floor boards when i started fixin rust... and it looks like somebody put in cheap sound deadener.. its about a 1/16 inch thin and i had to chisel it off piece by piece since it was so brittle... do i need to replace that or can i go with my wants.. i want to dynomat it then put carpet is that good enough?? its as thin as our glove box liners...

Longhorn Man · 02-20-2009, 01:01 AM

the stuff you scraped up was probably the original stuff.

**70cst** · 02-20-2009, 09:33 AM

Quote:

Originally Posted by tim21391

well i had a bunch of gunk on my floor boards when i started fixin rust... and it looks like somebody put in cheap sound deadener.. its about a 1/16 inch thin and i had to chisel it off piece by piece since it was so brittle... do i need to replace that or can i go with my wants.. i want to dynomat it then put carpet is that good enough?? its as thin as our glove box liners...

http://www.b-quiet.com/?googleads

JFYI...I did a search on sound deadner and heat insulation material and B-Quiet is very very close to Dynamat as far as specs go but cheaper. I bought mine off ebay and got free shipping.

tim21391 · 02-20-2009, 11:15 AM

oh ok i can get a good deal at the local electronic store i know a few guys there and can get me a good deal on dynomat.. gotta get the metal work done first before i worry about that haha.. just wondering what i was i was scraping up a real PITA.. but oh well what isnt these days right?

**70cst** · 02-20-2009, 11:18 AM

tim21391...all the work on your truck will make you appreciate your truck. Good deal on the Dynamat.

tim21391 · 02-21-2009, 02:03 AM

thanks i will love it when its done.. i have dreams alot of how i want it done.. when its done i dont care how much a gallon of gas is people will see me crusing around almost all day when i first get it done... its been almost 3-4 months since i have drove it

texanidiot25 · 02-21-2009, 02:07 AM

I'm actually shocked how well the stock under coating does. With no carpet, or sound deadener in my truck, it's quieter than my '90 firebird, even the wind noise is less. I can hold a normal conversation even over the roaring V8 with 4.10 gears at 65..

tim21391 · 02-21-2009, 02:19 PM

well i went and talked to the guys that sell this stuff.. i can get the hush matt kit for $100

enaberif · 02-21-2009, 02:28 PM

Check out ebay if you want sound deadener.

I picked up 50 sq feet of a cheaper alternative and it cost me $80 shipped to my door.

tim21391 · 02-23-2009, 12:25 AM

i think the kit is $100 for 200 sq ft... i think i can get employee discount not sure yet... long ways from that point haha gotta worry about filler and primer first

02-20-2009, 12:59 AM	#1
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	did the factory put down sound deadener? well i had a bunch of gunk on my floor boards when i started fixin rust... and it looks like somebody put in cheap sound deadener.. its about a 1/16 inch thin and i had to chisel it off piece by piece since it was so brittle... do i need to replace that or can i go with my wants.. i want to dynomat it then put carpet is that good enough?? its as thin as our glove box liners... __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-20-2009, 01:01 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: did the factory put down sound deadener? the stuff you scraped up was probably the original stuff.

02-20-2009, 11:15 AM	#4
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: did the factory put down sound deadener? oh ok i can get a good deal at the local electronic store i know a few guys there and can get me a good deal on dynomat.. gotta get the metal work done first before i worry about that haha.. just wondering what i was i was scraping up a real PITA.. but oh well what isnt these days right? __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-20-2009, 11:18 AM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: did the factory put down sound deadener? tim21391...all the work on your truck will make you appreciate your truck. Good deal on the Dynamat. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

02-21-2009, 02:03 AM	#6
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: did the factory put down sound deadener? thanks i will love it when its done.. i have dreams alot of how i want it done.. when its done i dont care how much a gallon of gas is people will see me crusing around almost all day when i first get it done... its been almost 3-4 months since i have drove it __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-21-2009, 02:07 AM	#7
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: did the factory put down sound deadener? I'm actually shocked how well the stock under coating does. With no carpet, or sound deadener in my truck, it's quieter than my '90 firebird, even the wind noise is less. I can hold a normal conversation even over the roaring V8 with 4.10 gears at 65..

02-21-2009, 02:19 PM	#8
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: did the factory put down sound deadener? well i went and talked to the guys that sell this stuff.. i can get the hush matt kit for $100 __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

02-21-2009, 02:28 PM	#9
enaberif Registered User Join Date: Jan 2009 Location: Calgary, AB Posts: 1,181	Re: did the factory put down sound deadener? Check out ebay if you want sound deadener. I picked up 50 sq feet of a cheaper alternative and it cost me $80 shipped to my door.

02-23-2009, 12:25 AM	#10
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: did the factory put down sound deadener? i think the kit is $100 for 200 sq ft... i think i can get employee discount not sure yet... long ways from that point haha gotta worry about filler and primer first __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.