Widest FRONT wheel??

[see ten]

I've seen several posts with requests for measurements and specs of the widest wheel that we can bolt to the back of these trucks....How about the front?? I'm sure a factory height truck is going to have more room, but I'm talking about trucks with at least 3"-4" of drop.

Here's a couple pics of when we bolted both of my 9.5" back wheels on to one side of Brian's 71. Of course we didn't try to drive it like this...but I like the look of a wide front wheel.









These wheels have 4 3/4" backspacing....I'm guessing about 5.5" of backspacing would work??? Of course that might cause some inner fender/control arm issues. A larger diameter wheel could possibly clear the control arms (if there even was an issue here). It could be worth the inner fender mods in order to pull off the look? Of course, then we might have to widen the rear tubs and try to get some 11" or 12" wide rims back there....

[big_al_71]

Both of you guys trucks look amazing

[stllookn]

Geeeeez! Don't have any friends that drive a POS??????? Or do you just ban them from coming to visit...LOL?

[see ten]

I encourage visitors with crusty trucks.....makes my stuff look better!

[72BlckButy]

Originally Posted by see ten

I encourage visitors with crusty trucks.....makes my stuff look better!

[thebrown83]

In my opinion that looks perfect on the front with that backspacing. I like it when the tire sticks out even to the top lip of the wheel opening. If only the back was 1-2 inches wider. Of course this would not work with really low trucks though.

[thirdstreettito]

I'd love to have 15x9F and 15x11R. It would look pretty sweet with about 4" backspace, that way the wheels stick out, but not too much.

[jott_06]

my GMC has 10inch wide wheels on all corners and its got a 3/5 drop. No problems with clearance

[lbrtzmr]

22-10 295 30 22 tire

[see ten]

Originally Posted by lbrtzmr

22-10 295 30 22 tire

That's what I'm talkin about!! What kind of backspacing are you running, and how wide is the rolling stock out back??

Thanks!

[67_C-30]

Originally Posted by see ten

That's what I'm talkin about!! What kind of backspacing are you running, and how wide is the rolling stock out back??

Thanks!

Out of curiosity, Asa, what backspacing and tire sizes are your's. I'm going to be ordering rims soon, and I know I want 17's, so I see no reason to reinvent the wheel (pun intended). I love the way all ya'll "Worthless" guys trucks look, and I'd like to go with a similiar combo. Thanks!

[see ten]

Here ya go... http://67-72chevytrucks.com/vboard/s...=143835&page=6

Brian and Chuckles trucks have the same size tires and wheels but they're both running 5" of Backspacing on the rear wheels.

[Ray Rust]

Hi guys I run 22x10 with 305/40s on all corners without a problem , I tried up loading photos but lucked out

[HuggerCST]

Thanks for the thread and the pics Asa, I've been trying to decide on what I want also, and wondered how a 17x9.5 with a 4&1/2" BS would look out back. Also, I have some 17x8s with a 5" BS, and wondered if they are going to clear on the front. I don't have the camera skill that you do, but here are some of a 17x9.5 with a 5 & 1/2" backspace, 275/50 tire. and a 4" drop. The backspace is maxed, with only about 1/2" of clearance.

[HuggerCST]

This is a 17x8" with the same size tire and a 4" backspace. I haven't got the fronts done yet, so no pics of that, but I'm hoping this thread will help me decide.

[see ten]

Ray, if you haven't been welcomed to the board yet...WELCOME!!!! Try going to www.photobucket.com and setting up a free account for hosting your pictures. It only takes a few minutes and then you'll be up and rollin, showin off your ride.


Wynn, You gonna get back out there and bolt that 17x9.5 with the 5.5" BS on the front and see how it fits for me? .....Gonna take a couple pics while you're at it as well?? I'm not concerned about the inner fenders so much as control arm /frame interference.

Thanks for all the feedback from everyone so far!! Lookin forward to seeing some more.


(Looks like that lil pickup is coming together Wynn....When's it going to be road ready?)

[HuggerCST]

Originally Posted by see ten

Ray, if you haven't been welcomed to the board yet...WELCOME!!!! Try going to www.photobucket.com and setting up a free account for hosting your pictures. It only takes a few minutes and then you'll be up and rollin, showin off your ride.


Wynn, You gonna get back out there and bolt that 17x9.5 with the 5.5" BS on the front and see how it fits for me? .....Gonna take a couple pics while you're at it as well?? I'm not concerned about the inner fenders so much as control arm /frame interference.

Thanks for all the feedback from everyone so far!! Lookin forward to seeing some more.


(Looks like that lil pickup is coming together Wynn....When's it going to be road ready?)

SOON I HOPE! Yes, I'll bolt it on and get some pics, but it's still 6 lug up front at the moment so it may be a few weeks. If it'll fit I may just pick up a set of 9.5s with a 4&1/2" BS for the back now that I've seen how they look on Brian's. I kinda like the 275/50 up front too.

[67_C-30]

Thanks Asa. I was also wondering if a 17 X 9.5" with 4.5" BS would work, and you're pretty close at 4.75" If you had it to do over, would you go with a 4.75" again or recomend something else. I'm asking because you said Brian and Chuckles went with 5", and I was wondering if there was a reason why they did.

[Ray Rust]

Thanks see10 I've just tried the photobucket but still can't get my head around it !!![IMG]photobucket.com/C10Rusty[/IMG] try again 22x10 305/40s alround

[HuggerCST]

Maybe this will work. Here ya go Ray.

[67_C-30]

Here ya go man! Very nice import truck!

[67_C-30]

Dang Wynne, you beat me to it!!

To do what we did Ray Rust, copy the link on your photobucket page that says "IMG Code - Forums & Bulletin Boards" under the pic and paste it on this board.

[HuggerCST]

LOL! Do you know the backspace on those wheels Ray?

[see ten]

I'd run a 5" BS before I went with a 4.5" BS. The reason I went with 4.75 is that I had bolted a friends 10" wide wheel that had 4.5" of BS on and it fit. The guys where I bought my wheels thought 5" would work...I split the difference. The reason that Brian and Chuckles went with 5" was that the kind of wheels they bought gave them a choice of 4.5" or 5". My wheels were true customs and I could have gotten whatever I wanted as far as BS

.....That was a lot of BS wasn't it?

Here's a couple of pics of Brian's curent wheel...I've gotta have some better pictures somewhere...

[Ray Rust]

Thanks all , I will try again later . but hey a big thanks for posting my pride and joy for me