Will lowering springs for 88 & up fit an 84? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 02-22-2009, 05:26 PM

Found a good buy on a set of front 2" lowering springs but they are for 88 and up years. Would anyone know if these would work in my 84 Siera?

Any info is appreciated.

Thanks.

Scott

Primer70 · 02-22-2009, 05:45 PM

No, the 87 down springs have a taper at the top to keep them in the upper spring pockets, the 88 up don't have the taper in the spring.

**ScottH** · 02-22-2009, 05:55 PM

Thanks Primer70, I figured there was a difference but did not know what it was.

02-22-2009, 05:26 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Will lowering springs for 88 & up fit an 84? Found a good buy on a set of front 2" lowering springs but they are for 88 and up years. Would anyone know if these would work in my 84 Siera? Any info is appreciated. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-22-2009, 05:45 PM	#2
Primer70 Superbad Join Date: Mar 2007 Location: Pittsburg, CA Posts: 153	Re: Will lowering springs for 88 & up fit an 84? No, the 87 down springs have a taper at the top to keep them in the upper spring pockets, the 88 up don't have the taper in the spring.

02-22-2009, 05:55 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Will lowering springs for 88 & up fit an 84? Thanks Primer70, I figured there was a difference but did not know what it was. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.