Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-27-2009, 11:19 AM | #1 |
Registered User
Join Date: Feb 2008
Location: Huntsville, AL
Posts: 197
|
Easy no-hack hidden kill switch
I hope I am not borrowing someone elses' idea, but I was trying to fix two problems at once last night and came up with this:
1. How to fill in the "choke" hole in my dash cluster with something that looks good since I replaced the carburator with an electric choke version. 2. Install a hidden kill switch without hacking into the new wiring harness. Here's what I did - Took an old windshield wiper switch and new knob/bezel, cut two splices (10" and 18") and installed three female and and one spade connectors. Disconnected one of the neutral safety switch leads and installed the short lead between it and the wiper switch. Ran the longer of the two from the wiper switch back to the neutral safety switch. Installed the wiper switch/bezel into the dash. The far left position is the run position but anything else will prevent starting. It's hidden in plain sight and looks pretty good. I will probably go back and modify it to use a relay since I am not sure if the switch can handle the amperage, but the concept will remain the same. Last edited by soule64; 02-27-2009 at 02:10 PM. Reason: , |
02-27-2009, 11:37 AM | #2 |
Happy Camper
Join Date: Feb 2006
Location: Northern California
Posts: 8,407
|
Re: Easy no-hack hidden kill switch
Looks good!
__________________
RIP El Jay! Love you brother! |
02-27-2009, 11:40 AM | #3 |
Registered User
Join Date: Nov 2006
Location: Springfield/Kansas City
Posts: 1,842
|
Re: Easy no-hack hidden kill switch
very nice!
|
02-27-2009, 11:58 AM | #4 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: Easy no-hack hidden kill switch
That's a cool mod.
__________________
Beat it to fit, Paint it to match... |
02-27-2009, 12:01 PM | #5 |
Gone to greener pastures
Join Date: May 2007
Location: Gateway to the Delta
Posts: 7,354
|
Re: Easy no-hack hidden kill switch
Sneaky.
I like the "hide in plain sight" idea.
__________________
'69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck |
02-27-2009, 12:03 PM | #6 |
Senior Member
Join Date: Dec 1999
Location: Urbana,Ohio,USA
Posts: 4,618
|
Re: Easy no-hack hidden kill switch
Great mod, thanks for the writeup on it.
__________________
2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6 |
02-27-2009, 12:06 PM | #7 |
Registered User
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
|
Re: Easy no-hack hidden kill switch
I agree, that's a great mod.
__________________
Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com |
02-27-2009, 12:37 PM | #8 |
Senior Member
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,524
|
Re: Easy no-hack hidden kill switch
I like the idea too, but yeah I think it "should" have a relay, cause it would suck to not be able to start your own truck cause the switch blew out (of course since you konw about it, it would be pretty easy to wire around it and bypass the switch in a pinch)
|
02-27-2009, 12:54 PM | #9 |
Registered User
Join Date: Feb 2008
Location: Huntsville, AL
Posts: 197
|
Re: Easy no-hack hidden kill switch
That's another reason why I didn't hardwire the wiper switch (or the relay). I kept the NSS lead complete and near the NSS so if something happened I could just pull it from the wiper switch jumper and plug it back in. But yeah, a relay is definately in the plan...
|
02-27-2009, 01:04 PM | #10 |
Registered User
Join Date: Jul 2004
Location: Weatherford, TX
Posts: 225
|
Re: Easy no-hack hidden kill switch
To me, that's pretty impressive........really using your brain power.
|
02-27-2009, 01:11 PM | #11 |
Registered User
Join Date: Jul 2008
Location: Grande Prairie Alberta
Posts: 59
|
Re: Easy no-hack hidden kill switch
That's why you get paid the big bucks!
|
02-27-2009, 01:17 PM | #12 |
Registered User
Join Date: May 2006
Location: at work
Posts: 2,552
|
Re: Easy no-hack hidden kill switch
killer had one of those..the thieves that gotem could show ya all about it!
it was even hidden!
__________________
R.I.P. Killer 71 10/26/07 |
02-27-2009, 01:52 PM | #13 |
MOVE OVER
Join Date: Jun 2002
Location: Warrensburg, MO
Posts: 5,470
|
Re: Easy no-hack hidden kill switch
great idea!
__________________
No matter where you are..... There you are... Buckaroo Banzi |
02-27-2009, 02:56 PM | #14 |
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: Easy no-hack hidden kill switch
A very good idea and with the money some of us have in these trucks it's an easy fix - but if the guy's gonna hot wire your truck, he might notice the different wiring. Just a thought.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7 |
02-27-2009, 03:21 PM | #15 |
Junior Member
Join Date: Mar 2007
Location: Hideaway, TX
Posts: 4,950
|
Re: Easy no-hack hidden kill switch
Any chance they read about your switch here?
__________________
71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 02-27-2009 at 03:26 PM. |
02-27-2009, 03:25 PM | #16 |
Registered User
Join Date: Feb 2008
Location: Huntsville, AL
Posts: 197
|
Re: Easy no-hack hidden kill switch
Well, I used the same color, size wire and connecors as the original NSS setup and tucked everything under the column so it's hard to see. And it should still kill the circuit if the ignition switch is pulled and hotwired. It's not going to work if someone gets underneath and crosses the selenoid though. A pro might figure it out pretty quick but (hopefully) it might stop the amature/kid/someone in a hurry.
|
02-27-2009, 03:30 PM | #17 |
Registered User
Join Date: Feb 2008
Location: Huntsville, AL
Posts: 197
|
Re: Easy no-hack hidden kill switch
|
02-27-2009, 03:41 PM | #18 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: Easy no-hack hidden kill switch
It's still a secret. You didn't tell us whether the switch had to be on high or low speed to start your truck.................:p.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
02-27-2009, 04:02 PM | #19 |
Registered User
Join Date: Jul 2008
Location: Buckeye, Arizona
Posts: 694
|
Re: Easy no-hack hidden kill switch
I had a thought of hiding a pushbutton switch behind the cigarette lighter so when you press the button on the lighter you kill the ignition. Just an idea I had
Last edited by greystoke; 02-27-2009 at 04:03 PM. |
02-27-2009, 05:55 PM | #20 |
Registered User
Join Date: Oct 2008
Location: Houston, Tx
Posts: 182
|
Re: Easy no-hack hidden kill switch
well i had a custom switch on my truck too my high beam light was screwed up and only started when i pushed on and off like 20x and to find a the right sequence to get the lights turned on without cutting the truck off does that count?
__________________
2009 dodge hemi custom paint 86 lwb bagged layin frame 73 2 door nova 54 bel air |
02-27-2009, 05:59 PM | #21 |
Resident of Here
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
|
Re: Easy no-hack hidden kill switch
Very good idea!
__________________
~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck |
02-27-2009, 06:02 PM | #22 |
Eat My Rust
Join Date: Jan 2007
Location: Cypress, Texas
Posts: 3,362
|
Re: Easy no-hack hidden kill switch
Cool idea!
I've thought about using the Cargo Light switch in the cab, and just hard wiring the cargo light to always come on with the dome. |
02-27-2009, 06:04 PM | #23 |
Registered User
Join Date: Sep 2008
Location: Mobile, Al.
Posts: 687
|
Re: Easy no-hack hidden kill switch
Thats a good idea.
|
02-27-2009, 06:35 PM | #24 |
Registered User
Join Date: Dec 2008
Location: Claremore OK
Posts: 52
|
Re: Easy no-hack hidden kill switch
Awesome idea !!! I've fabricated an inside hood release, mounted the pull lever up high by the drivers fresh air vent. Every little theft deterrent helps IMO.
__________________
68' SWB 355 CID since 1987 89' S15 4WD 4.3 08' VTX 1300R 08' Chevrolet HHR (Wife's ride) "That man right there is the best sprint car driver in the whole ---damned country!" 1974- Indianapolis- AJ Foyt pointing out Jan Opperman in the garage. |
02-27-2009, 07:17 PM | #25 |
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Easy no-hack hidden kill switch
Great Idea,,, but if they want it they will get it...
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|