![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2009
Location: cashmere washington
Posts: 6
|
![]()
im currently in the middle of swapping out my stock 350 and 4 speed for a 454 and th350
im using the original motor mounts adn cross member and its a long bed 2wd 1971 c10 my question is what are correct driveline angles for this two piece drive line with the engine and tranny in i got 9 degrees down at the tail shaft and 8.5 degrees up at the pinion with the suspention loaded, and i need to make sure i dont have any vibrations thanks for any and all input |
![]() |
![]() |
![]() |
#2 |
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: driveline angles?
that will work if youre talking about the angle of the output shaft and the angle of the pinion.
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|