lots of parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ctucker · 03-12-2009, 07:51 PM

Guys cleaning out the garage! Finally got my truck running and driving

So the rest of the parts I have need to go I posted the link cause its a lot of photos to post in the thread but if need be I will post individual pics or close ups on request! Due to post rules and me feeling lazy from cleaning the garage all day today! 400 shipped for everything!! or will part! make offers! Please keep everything in the thread.
Here is a list so far

2 glove box doors
Windshield wiper motor (working condition is unknown is has all wires with original plugs)
Original washer bottle with bracket
2 original spray nozzles
Original radio speaker (need rebuilt)
1 parts radio
1 working AM radio (out of a 68 Chevy Van)
1 radio antenna
Wiring harness for speaker to radio
2 vent windows (needs new felts and rubbers)
1 Chrome universal alternator bracket (new)
Steering column to dash seal (new) SOLD
Lower steering column seal (new) SOLD
Steering column floor foam seal (new) SOLD
Gas tank ring gasket (new)
Gas tank neck seal (new)
Glove box light kit (new)
Blower motor rubber seal (new)
4 parking light lens
3 parking light assemblies
2 parking light gaskets
2 deflector balls
2 a/c controller (1 good but needs fan switch 1 for parts but has brand new arms)
Original S plenium (cracked)
Extra ac controller glass
1 temp switch w/o gauges version almost brand new test fitted
1 original wiper arm
2 taillights (new) SOLD
2 reverse lights (new) SOLD
1 reverse light
Rear side marker light
Neutral safety switch
Shift lever
Turn signal lever
steering column shaft and tube (all parts are there except the top side stuff like turn signal canceling cams etc)
2 interior door handles
1 window crank
2 green visor clips (look new but unsure)
1 original green horn button (rough)
1 hood to cowl seal
Window channel felts
1 350 emblem

Update more a little later
Feel free to make offers stuff needs to go!

One of the radios works perfect the other was used for parts

one of the ac contollers works it has a homeade fix! bought it off a boardmember fix works great! I used the same one in my truck instead of doing the rebuild! The other is a parts controller it has all new arms on it!

Any electric stuff you see is as is I have no idea if the stuff works except the AM radio! Most of it was just aquired over the past couple years!

some of the gasket kits you see everything is there except the heater core gasket and one of the interior a/c gaskets everything else is there!

http://s64.photobucket.com/albums/h1...rts/?start=all

thanks guys!

FITS2AT · 03-12-2009, 08:12 PM

How much for the fleet side tail and reverse lights shipped to 37029?

386kustoms · 03-12-2009, 09:55 PM

does the non working radio have a good face and knobs/buttons? if so how much shipped to 32724 daytona

FOREVER71 · 03-12-2009, 09:58 PM

how much for all the trim and the upper and lower rubber for the steering colum.......to 97060

ctucker · 03-12-2009, 10:33 PM

fits2at I assume you mean the new ones if so 30 shipped!

386kustoms i will get some closeup pics for you and you can make that call

forever71 the shipping on the trim probably kills it for ya the cheapest shipping I can find is 49 dollars via UPS so 115 shipped for all. If you would like to try to find it cheaper feel free and I will knock off the shipping! I have both seals and sponges not sure of the difference but please specify which or all.

FOREVER71 · 03-12-2009, 11:50 PM

i am out on the trim...but the rubber that seal the firewall and the one that sits under the bezel how much for just those?what else do you have there that is new?i see some other bags but cant really tell what i am looking at.

FOREVER71 · 03-13-2009, 12:53 AM

very cool....thanks

ctucker · 03-13-2009, 09:03 AM

386kustoms does not have a good face coudnt get it to show up right cause my flash covered it up but you decide if you want it free cover shipping!

FOREVER71 · 03-13-2009, 09:09 AM

how much for all the new column seals? is the blower seal for a\c or without or does it matter?

ctucker · 03-13-2009, 09:49 AM

it says with a/c not sure!
20 for all including the blower seal!

coonrod · 03-13-2009, 10:45 AM

how bad off is the trim does it just need new black paint and woodgrain is it upper and lower for a swb if it good ill take it you said 115 shipped for all ?

ctucker · 03-13-2009, 04:18 PM

the trim is for a LWB the black and woodgrain looks almost new some of it has holes in it where the moron before didnt know how to use the clips so he chose screws and double sided tape! thats why im selling it so cheap just shipping is expensive

FOREVER71 · 03-13-2009, 08:48 PM

ok just the steering column stuff shipped price to 90760...thanks

ctucker · 03-14-2009, 01:26 PM

hows 15 shipped?

FOREVER71 · 03-14-2009, 01:37 PM

sounds good, pm me your info and ill send off a m/o....

ctucker · 03-14-2009, 07:58 PM

pmd info thanks

anyone else need anything???

ctucker · 03-15-2009, 04:08 PM

come on somebody gotta need something

**lks dcvn** · 03-15-2009, 07:48 PM

Are the rear new lenses still available for $30 shipped - if these come with the seals - then put me in line.

72BlckButy · 03-15-2009, 07:59 PM

ctucker are the trim pieces for sale?

I'm looking for a decent to nice driver's side cab corner (wood) trim piece.

ctucker · 03-15-2009, 11:14 PM

rear lens are still sealed in the pkg I dont have seals for them and to be honest I didnt know they even made seals for them but he hasent got back to me so yes they are still available!

im almost positive I have the trim piece I will find it and snap a couple pics for ya tommorrow!

**lks dcvn** · 03-16-2009, 10:19 AM

I will take the rear lenses (reverse and brake) - send me a PM so I know where to send the $.

Thx.

**lks dcvn** · 03-16-2009, 01:42 PM

payment sent for the lenses -

ctucker · 03-16-2009, 11:48 PM

got payment will go out tommorrow

Sorry I didnt get pics of the trim today it was raining something horrible today and I didnt make it out there to get the pics

FOREVER71 · 03-17-2009, 12:30 AM

money order sent today for column seals....

72BlckButy · 03-17-2009, 08:58 PM

Quote:

Originally Posted by ctucker

got payment will go out tommorrow

Sorry I didnt get pics of the trim today it was raining something horrible today and I didnt make it out there to get the pics

No problem ctucker... whenever you get a chance post a pic. I will try to keep updated on your thread.

Thanks!
Nate

03-12-2009, 07:51 PM	#1
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	lots of parts for sale Guys cleaning out the garage! Finally got my truck running and driving So the rest of the parts I have need to go I posted the link cause its a lot of photos to post in the thread but if need be I will post individual pics or close ups on request! Due to post rules and me feeling lazy from cleaning the garage all day today! 400 shipped for everything!! or will part! make offers! Please keep everything in the thread. Here is a list so far 2 glove box doors Windshield wiper motor (working condition is unknown is has all wires with original plugs) Original washer bottle with bracket 2 original spray nozzles Original radio speaker (need rebuilt) 1 parts radio 1 working AM radio (out of a 68 Chevy Van) 1 radio antenna Wiring harness for speaker to radio 2 vent windows (needs new felts and rubbers) 1 Chrome universal alternator bracket (new) Steering column to dash seal (new) SOLD Lower steering column seal (new) SOLD Steering column floor foam seal (new) SOLD Gas tank ring gasket (new) Gas tank neck seal (new) Glove box light kit (new) Blower motor rubber seal (new) 4 parking light lens 3 parking light assemblies 2 parking light gaskets 2 deflector balls 2 a/c controller (1 good but needs fan switch 1 for parts but has brand new arms) Original S plenium (cracked) Extra ac controller glass 1 temp switch w/o gauges version almost brand new test fitted 1 original wiper arm 2 taillights (new) SOLD 2 reverse lights (new) SOLD 1 reverse light Rear side marker light Neutral safety switch Shift lever Turn signal lever steering column shaft and tube (all parts are there except the top side stuff like turn signal canceling cams etc) 2 interior door handles 1 window crank 2 green visor clips (look new but unsure) 1 original green horn button (rough) 1 hood to cowl seal Window channel felts 1 350 emblem Update more a little later Feel free to make offers stuff needs to go! One of the radios works perfect the other was used for parts one of the ac contollers works it has a homeade fix! bought it off a boardmember fix works great! I used the same one in my truck instead of doing the rebuild! The other is a parts controller it has all new arms on it! Any electric stuff you see is as is I have no idea if the stuff works except the AM radio! Most of it was just aquired over the past couple years! some of the gasket kits you see everything is there except the heater core gasket and one of the interior a/c gaskets everything else is there! http://s64.photobucket.com/albums/h1...rts/?start=all thanks guys! __________________ ~Chris "If your not doing anything then do it quickly!" Last edited by ctucker; 03-18-2009 at 09:34 PM.

03-12-2009, 08:12 PM	#2
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: lots of parts for sale How much for the fleet side tail and reverse lights shipped to 37029? __________________

03-12-2009, 09:55 PM	#3
386kustoms Registered User Join Date: Feb 2009 Location: deland florida Posts: 117	Re: lots of parts for sale does the non working radio have a good face and knobs/buttons? if so how much shipped to 32724 daytona

03-12-2009, 09:58 PM	#4
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: lots of parts for sale how much for all the trim and the upper and lower rubber for the steering colum.......to 97060

03-12-2009, 10:33 PM	#5
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale fits2at I assume you mean the new ones if so 30 shipped! 386kustoms i will get some closeup pics for you and you can make that call forever71 the shipping on the trim probably kills it for ya the cheapest shipping I can find is 49 dollars via UPS so 115 shipped for all. If you would like to try to find it cheaper feel free and I will knock off the shipping! I have both seals and sponges not sure of the difference but please specify which or all. __________________ ~Chris "If your not doing anything then do it quickly!" Last edited by ctucker; 03-12-2009 at 10:34 PM.

03-12-2009, 11:50 PM	#6
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: lots of parts for sale i am out on the trim...but the rubber that seal the firewall and the one that sits under the bezel how much for just those?what else do you have there that is new?i see some other bags but cant really tell what i am looking at.

03-13-2009, 12:53 AM	#7
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: lots of parts for sale very cool....thanks

03-13-2009, 09:03 AM	#8
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale 386kustoms does not have a good face coudnt get it to show up right cause my flash covered it up but you decide if you want it free cover shipping! __________________ ~Chris "If your not doing anything then do it quickly!"

03-13-2009, 09:09 AM	#9
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: lots of parts for sale how much for all the new column seals? is the blower seal for a\c or without or does it matter?

03-13-2009, 09:49 AM	#10
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale it says with a/c not sure! 20 for all including the blower seal! __________________ ~Chris "If your not doing anything then do it quickly!"

03-13-2009, 10:45 AM	#11
coonrod Registered User Join Date: Feb 2009 Location: chas sc Posts: 60	Re: lots of parts for sale how bad off is the trim does it just need new black paint and woodgrain is it upper and lower for a swb if it good ill take it you said 115 shipped for all ?

03-13-2009, 04:18 PM	#12
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale the trim is for a LWB the black and woodgrain looks almost new some of it has holes in it where the moron before didnt know how to use the clips so he chose screws and double sided tape! thats why im selling it so cheap just shipping is expensive __________________ ~Chris "If your not doing anything then do it quickly!"

03-13-2009, 08:48 PM	#13
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: lots of parts for sale ok just the steering column stuff shipped price to 90760...thanks

03-14-2009, 01:26 PM	#14
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale hows 15 shipped? __________________ ~Chris "If your not doing anything then do it quickly!"

03-14-2009, 01:37 PM	#15
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: lots of parts for sale sounds good, pm me your info and ill send off a m/o....



Register or Log In To remove these advertisements.

03-14-2009, 07:58 PM	#16
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale pmd info thanks anyone else need anything??? __________________ ~Chris "If your not doing anything then do it quickly!"

03-15-2009, 04:08 PM	#17
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale come on somebody gotta need something __________________ ~Chris "If your not doing anything then do it quickly!"

03-15-2009, 07:48 PM	#18
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: lots of parts for sale Are the rear new lenses still available for $30 shipped - if these come with the seals - then put me in line.

03-15-2009, 07:59 PM	#19
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: lots of parts for sale ctucker are the trim pieces for sale? I'm looking for a decent to nice driver's side cab corner (wood) trim piece. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-15-2009, 11:14 PM	#20
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale rear lens are still sealed in the pkg I dont have seals for them and to be honest I didnt know they even made seals for them but he hasent got back to me so yes they are still available! im almost positive I have the trim piece I will find it and snap a couple pics for ya tommorrow! __________________ ~Chris "If your not doing anything then do it quickly!"

03-16-2009, 10:19 AM	#21
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: lots of parts for sale I will take the rear lenses (reverse and brake) - send me a PM so I know where to send the $. Thx.

03-16-2009, 01:42 PM	#22
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: lots of parts for sale payment sent for the lenses -

03-16-2009, 11:48 PM	#23
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: lots of parts for sale got payment will go out tommorrow Sorry I didnt get pics of the trim today it was raining something horrible today and I didnt make it out there to get the pics __________________ ~Chris "If your not doing anything then do it quickly!"

03-17-2009, 12:30 AM	#24
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: lots of parts for sale money order sent today for column seals....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.