Frame Off - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*roofing458* · 03-23-2009, 05:46 PM

Used a 4000 Psi pressure washer with a sandblast attachment cleaned up the botton in a couple of hours .I used a sky hook then attached a couple of straps lifted that ole girl up & gave it a good belly bath .The only problem with the sky hooks is you need Cumulous clouds to hook them to.i had to wait two weeks for these special sky hook clouds to move into the area.

steverino66 · 03-23-2009, 05:49 PM

Those must be the same skyhooks we used to send the new guys to the tool crib for when I was in the Air Force. They keep them right next to the left-handed torque wrench!

sidthirteen · 03-23-2009, 06:19 PM

That's next to the bucket of "rotor wash"

*roofing458* · 03-23-2009, 08:22 PM

The guys started to get a little cold after getting wet so sent one of the labors his name is Ben Wackinhoff for a bucket of sparks to get a fire going .Never could figure out that last name ,irish,polish HMMMM,nice guy shows up everyday....

sidthirteen · 03-23-2009, 09:07 PM

....Wonder if he found it.....they're right by the A.S.H. receptacles..

protrash64 · 03-23-2009, 10:49 PM

Quote:

Originally Posted by steverino66

Those must be the same skyhooks we used to send the new guys to the tool crib for when I was in the Air Force. They keep them right next to the left-handed torque wrench!

He's gonna have trouble finding the lefty wrench, I moved it to get the wire stretcher

.

kizer · 03-24-2009, 12:05 PM

Realitve Bearing Grease
Bucket of Steam

apachedaddy · 03-24-2009, 12:11 PM

Dont forget the roll of flight line or the box of grid squares for your map.

**Corts60** · 03-24-2009, 01:18 PM

While he's over there, tell him to grab the keys to the seachest so we can get the light bulbs for the smoking lamp and also grab a brass magnet.

**Corts60** · 03-24-2009, 01:20 PM

And if you guys find my metric crescent wrench.....

retodd7711 · 03-24-2009, 06:37 PM

It's right next to my round tuit.

kizer · 03-25-2009, 04:11 PM

I forgot about the smoking lamp and brass magnets.

TimE · 03-25-2009, 05:55 PM

I just hope all of the blinker fluid didn't leak out while you had it lifted up washing...

sidthirteen · 03-25-2009, 08:37 PM

Quote:

Originally Posted by TimE

I just hope all of the blinker fluid didn't leak out while you had it lifted up washing...

.......Good one!!!

*roofing458* · 03-26-2009, 06:11 PM

had some guys shoveling smoke today after the blinker fluid hit the exhaust pipe what a mess to clean up......

*roofing458* · 03-26-2009, 06:25 PM

There’s too much blood in my alcohol system.

*LILRED66* · 03-26-2009, 08:51 PM

I was diggin your thread and then a laughathon broke out. Any more progress photos to show us?

Maybe you can get someone to photoshop the pictures and it will look like one of those jumping lowriders....

**ChiefRocka** · 03-27-2009, 12:37 AM

That's a "Hopping" Lowrider !!

62 short step · 03-27-2009, 08:18 AM

Daniel 61 Apache · 03-28-2009, 12:58 PM

We had a pilot complain about his plane "acting up" while flying.....said it wouldn't fly right at all.

Next day we told him that we had a long talk with that particular plane and it promised to fly right from now on.

*roofing458* · 03-28-2009, 01:37 PM

Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic

*roofing458* · 03-28-2009, 01:55 PM

Any one have an extra muffler bearing .Left side

joe231 · 03-28-2009, 02:24 PM

I got tons of muffler bearings laying around.......but unfortunately they are all for the right side.

*roofing458* · 03-28-2009, 03:30 PM

Yes i have tried the right side, cut it twice and its still to short......

joe231 · 03-28-2009, 03:48 PM

if you cut it 2 more times it should be just right....

03-23-2009, 05:46 PM	#1
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Frame Off Used a 4000 Psi pressure washer with a sandblast attachment cleaned up the botton in a couple of hours .I used a sky hook then attached a couple of straps lifted that ole girl up & gave it a good belly bath .The only problem with the sky hooks is you need Cumulous clouds to hook them to.i had to wait two weeks for these special sky hook clouds to move into the area. Attached Images Last edited by roofing458; 03-23-2009 at 05:55 PM. Reason: sp

03-23-2009, 05:49 PM	#2
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: Frame Off Those must be the same skyhooks we used to send the new guys to the tool crib for when I was in the Air Force. They keep them right next to the left-handed torque wrench!

03-23-2009, 06:19 PM	#3
sidthirteen Registered User Join Date: Jul 2008 Location: riverside,ca Posts: 150	Re: Frame Off That's next to the bucket of "rotor wash"

03-23-2009, 08:22 PM	#4
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Frame Off The guys started to get a little cold after getting wet so sent one of the labors his name is Ben Wackinhoff for a bucket of sparks to get a fire going .Never could figure out that last name ,irish,polish HMMMM,nice guy shows up everyday....

03-23-2009, 09:07 PM	#5
sidthirteen Registered User Join Date: Jul 2008 Location: riverside,ca Posts: 150	Re: Frame Off ....Wonder if he found it.....they're right by the A.S.H. receptacles..

03-24-2009, 12:05 PM	#7
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Frame Off Realitve Bearing Grease Bucket of Steam __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

03-24-2009, 12:11 PM	#8
apachedaddy Registered User Join Date: Feb 2008 Location: pooler, GA Posts: 213	Re: Frame Off Dont forget the roll of flight line or the box of grid squares for your map.

03-24-2009, 01:18 PM	#9
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: Frame Off While he's over there, tell him to grab the keys to the seachest so we can get the light bulbs for the smoking lamp and also grab a brass magnet. __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

03-24-2009, 01:20 PM	#10
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: Frame Off And if you guys find my metric crescent wrench..... __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

03-24-2009, 06:37 PM	#11
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: Frame Off It's right next to my round tuit. __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

03-25-2009, 04:11 PM	#12
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Frame Off I forgot about the smoking lamp and brass magnets. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

03-25-2009, 05:55 PM	#13
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: Frame Off I just hope all of the blinker fluid didn't leak out while you had it lifted up washing... __________________ Just hopin' I live long enough to finish something!!!

03-26-2009, 06:11 PM	#15
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Frame Off had some guys shoveling smoke today after the blinker fluid hit the exhaust pipe what a mess to clean up...... Last edited by roofing458; 03-27-2009 at 09:29 PM. Reason: spell

03-26-2009, 06:25 PM	#16
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Frame Off There’s too much blood in my alcohol system.

03-26-2009, 08:51 PM	#17
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Frame Off I was diggin your thread and then a laughathon broke out. Any more progress photos to show us? Maybe you can get someone to photoshop the pictures and it will look like one of those jumping lowriders....



Register or Log In To remove these advertisements.

03-27-2009, 12:37 AM	#18
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Frame Off That's a "Hopping" Lowrider !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-27-2009, 08:18 AM	#19
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Frame Off __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

03-28-2009, 12:58 PM	#20
Daniel 61 Apache Registered User Join Date: May 2007 Location: Oceanside, CA Posts: 168	Re: Frame Off We had a pilot complain about his plane "acting up" while flying.....said it wouldn't fly right at all. Next day we told him that we had a long talk with that particular plane and it promised to fly right from now on.

03-28-2009, 01:37 PM	#21
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Frame Off Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic

03-28-2009, 01:55 PM	#22
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Frame Off Any one have an extra muffler bearing .Left side

03-28-2009, 02:24 PM	#23
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Frame Off I got tons of muffler bearings laying around.......but unfortunately they are all for the right side. __________________ *CHEVY ONLY*

03-28-2009, 03:30 PM	#24
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Frame Off Yes i have tried the right side, cut it twice and its still to short......

03-28-2009, 03:48 PM	#25
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Frame Off if you cut it 2 more times it should be just right.... __________________ *CHEVY ONLY*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.