|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-24-2009, 10:24 PM
|
#1 |
|
Registered User
Join Date: Oct 2006
Location: iowa
Posts: 722
|
when tight is too tight
so i pulled the carb. off of my '84 2wd shortbox tonight as it is due to be rebuilt...after removing the carb. i found that the vac. port that screws into the intake is split from....you guessed it...over torquing!! (muddering a few words) it drives me crazy when something is cranked in or on WAY too much...
__________________
"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you." '84 chevy half ton short box 2wd, 67,000 actual miles  '03 chevy 1500 HD crew cab 4x4 standard box, 6.0L 
|
|
|
|
03-24-2009, 11:25 PM
|
#2 |
|
Garage wrench
Join Date: Feb 2008
Location: LaCrosse, WI
Posts: 1,855
|
Re: when tight is too tight
looks like the one I removed from the intake on my '86, almost identical. Damn people
__________________
-Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD..... |
|
|
|
|
03-25-2009, 01:10 PM
|
#3 |
|
Registered User
Join Date: Jan 2004
Location: Weatherford,Tx
Posts: 747
|
Re: when tight is too tight
Could it have been broken when the motor was installed?
|
|
|
|
|
03-25-2009, 01:43 PM
|
#4 |
|
Account Suspended
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
|
Re: when tight is too tight
I heard somewhere... Torque it till it strips, then back off half a turn...lol
Last edited by 78 Chevyrado; 03-25-2009 at 01:43 PM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
