hubcaps for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mater · 03-30-2009, 08:22 PM

$10 a piece plus shipping; deals on multiple: All of them for $80!!!

My72BB · 03-30-2009, 08:24 PM

If the top ones are 3/4 ton I'm interested...let me know...Alan

**too much stuff** · 03-30-2009, 08:25 PM

How nice are the top 4 and the lower similar gmc cap? Any cracks where they mount?

67mater · 03-30-2009, 08:28 PM

You'll have to tell me how to know they are 3/4 ton or not.

The brown spot on one of the upper four is just an insect nest. Sorry they are a bit dusty in the pics. pretty good shape, but not amazing.

**too much stuff** · 03-30-2009, 08:34 PM

The top ones look like 3/4 ton. Should be about 12" across the back. The 1/2 tons are about 10 5/8" across the back.

Down south truckin · 03-30-2009, 10:46 PM

I may be interested in the top 4 chevy and the gmc like them pending shipping to 30047 Let me know if they get to me thanks Mike

My72BB · 03-31-2009, 06:47 PM

Where are we at with these? Did you figure out if they are for a 3/4 or 1/2.

Alan

longhorn70gmc · 04-02-2009, 07:30 PM

I am a hubcap freak, so I will try to help here. Look at the picture and compare the top set, 3/4 ton caps with the smaller half ton caps in the middle. The top ones are definitly 3/4. The bottom two GMC caps in the lower right even though different are 3/4 ton also. The middle caps and the one on the bottom left of the picture are 67/68 1/2 ton for our trucks. Hope this helps you.
If by chance you have any left please let me know. I will be interested in picking the rest up.
R/

**special-K** · 04-02-2009, 07:38 PM

The caps in question are 8-lug,one tons use them too.You can tell even when not next to the smaller caps because they are more angled towards the edge and the 1/2 tons are more squarish or flat across the face.

67mater · 04-06-2009, 07:43 PM

Thanks for all the info guys! and sorry for the delay, took a trip and picked up some sweet doors for $40!!

Anyways, the top four are 12" across, and per the others, they'd be 3/4 ton.

On the upper 4, My72BB is first, then too much stuff

Longhorn70GMC you're first on the rest, and maybe all if the other pass.

Thanks guys!

My72BB · 04-07-2009, 08:18 AM

OK..I'll take the top four. I'll pm my info to you.

Alan

Down south truckin · 04-07-2009, 10:34 PM

I'd still be interested in the lone odd GMC 3/4 ton cap if it gets to me.shipping to 30047 Thanks Mike

**too much stuff** · 04-07-2009, 10:51 PM

I think the lone gmc cap looks like a 1/2 ton to me. Either way, i am passing.

longhorn70gmc · 04-08-2009, 04:36 AM

Cool,
Just Let me know. Maybe a PM to remind me.

67mater · 04-08-2009, 10:06 PM

Down South Trucker, the lone GMC is yours.

My72BB really only wants 1 of the top four. So, My72BB would you want the other three? if not, longhorn70gmc, do you want 3 of the chevys alogn with the rest?

Down south truckin · 04-09-2009, 02:20 AM

shipping to 30047?? and your paypal info thanks Mike

longhorn70gmc · 04-09-2009, 03:01 AM

Quote:

Originally Posted by 67mater

Down South Trucker, the lone GMC is yours.

My72BB really only wants 1 of the top four. So, My72BB would you want the other three? if not, longhorn70gmc, do you want 3 of the chevys alogn with the rest?

Hello 67Mater,
Yes Sir, I sure would.
Reading the thread again it looked like Down South was wanting them at one point if they got to him. Does he still want them along with his lone GMC cap? I just want to make sure he gets a chance. My Board Brothers deserve their support. My ZIP is 93555 Ridgecrest Ca. Let me know what I will owe ya for what is left? Maybe one day I will stop buying caps and buy a membership, so I will be blue.

longhorn70gmc · 04-10-2009, 05:46 PM

Hey 67mater,
Hope your friday is well. I'll take any and all or what ever is left. Let me know?
Do you take Money order? Thanks Bro,
R/

**special-K** · 04-11-2009, 08:07 AM

Were those 1/2t GMC painted caps the outter nub type?

longhorn70gmc · 04-13-2009, 04:33 AM

TTT
Standing By, Let me know Mater!

67mater · 04-13-2009, 12:10 PM

Sorry all, out of town for easter with the family in law.

ok, My72BB only wants one of the top four, and I missed Down South Trucker wanting them also; Sorry.

so, Douth Sout Trucker, do you want 3 of the top 4 and your GMC?

67mater · 04-13-2009, 12:11 PM

Special K; what do you mean by outter nub type?

Down south truckin · 04-13-2009, 08:54 PM

Nah, I'll take just the GMC send your paypal info with total price shipped to 30047 Thanks Mike

67mater · 04-14-2009, 07:37 PM

ok, Down south, how about $15 shipped for the gmc?

My72BB how about $15 shipped for one of the top four? I'll wipe em down and send you the best one.

Longhorn, that leaves 9 hubcaps. how about $90 shipped?

Down south truckin · 04-15-2009, 07:06 PM

Sounds good what's your paypal address? thanks Mike

03-30-2009, 08:22 PM	#1
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	hubcaps for sale $10 a piece plus shipping; deals on multiple: All of them for $80!!! __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

03-30-2009, 08:24 PM	#2
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: hubcaps for sale If the top ones are 3/4 ton I'm interested...let me know...Alan

03-30-2009, 08:25 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: hubcaps for sale How nice are the top 4 and the lower similar gmc cap? Any cracks where they mount? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-30-2009, 08:28 PM	#4
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: hubcaps for sale You'll have to tell me how to know they are 3/4 ton or not. The brown spot on one of the upper four is just an insect nest. Sorry they are a bit dusty in the pics. pretty good shape, but not amazing. __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

03-30-2009, 08:34 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: hubcaps for sale The top ones look like 3/4 ton. Should be about 12" across the back. The 1/2 tons are about 10 5/8" across the back. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-30-2009, 10:46 PM	#6
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: hubcaps for sale I may be interested in the top 4 chevy and the gmc like them pending shipping to 30047 Let me know if they get to me thanks Mike

03-31-2009, 06:47 PM	#7
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: hubcaps for sale Where are we at with these? Did you figure out if they are for a 3/4 or 1/2. Alan

04-02-2009, 07:30 PM	#8
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: hubcaps for sale I am a hubcap freak, so I will try to help here. Look at the picture and compare the top set, 3/4 ton caps with the smaller half ton caps in the middle. The top ones are definitly 3/4. The bottom two GMC caps in the lower right even though different are 3/4 ton also. The middle caps and the one on the bottom left of the picture are 67/68 1/2 ton for our trucks. Hope this helps you. If by chance you have any left please let me know. I will be interested in picking the rest up. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

04-02-2009, 07:38 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: hubcaps for sale The caps in question are 8-lug,one tons use them too.You can tell even when not next to the smaller caps because they are more angled towards the edge and the 1/2 tons are more squarish or flat across the face. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-02-2009 at 07:41 PM.

04-06-2009, 07:43 PM	#10
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: hubcaps for sale Thanks for all the info guys! and sorry for the delay, took a trip and picked up some sweet doors for $40!! Anyways, the top four are 12" across, and per the others, they'd be 3/4 ton. On the upper 4, My72BB is first, then too much stuff Longhorn70GMC you're first on the rest, and maybe all if the other pass. Thanks guys! __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

04-07-2009, 08:18 AM	#11
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: hubcaps for sale OK..I'll take the top four. I'll pm my info to you. Alan

04-07-2009, 10:34 PM	#12
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: hubcaps for sale I'd still be interested in the lone odd GMC 3/4 ton cap if it gets to me.shipping to 30047 Thanks Mike

04-07-2009, 10:51 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: hubcaps for sale I think the lone gmc cap looks like a 1/2 ton to me. Either way, i am passing. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-08-2009, 04:36 AM	#14
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: hubcaps for sale Cool, Just Let me know. Maybe a PM to remind me. __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE! Last edited by longhorn70gmc; 04-08-2009 at 04:38 AM.

04-08-2009, 10:06 PM	#15
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: hubcaps for sale Down South Trucker, the lone GMC is yours. My72BB really only wants 1 of the top four. So, My72BB would you want the other three? if not, longhorn70gmc, do you want 3 of the chevys alogn with the rest? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro



Register or Log In To remove these advertisements.

04-09-2009, 02:20 AM	#16
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: hubcaps for sale shipping to 30047?? and your paypal info thanks Mike

04-10-2009, 05:46 PM	#18
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: hubcaps for sale Hey 67mater, Hope your friday is well. I'll take any and all or what ever is left. Let me know? Do you take Money order? Thanks Bro, R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

04-11-2009, 08:07 AM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: hubcaps for sale Were those 1/2t GMC painted caps the outter nub type? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-13-2009, 04:33 AM	#20
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: hubcaps for sale TTT Standing By, Let me know Mater! __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

04-13-2009, 12:10 PM	#21
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: hubcaps for sale Sorry all, out of town for easter with the family in law. ok, My72BB only wants one of the top four, and I missed Down South Trucker wanting them also; Sorry. so, Douth Sout Trucker, do you want 3 of the top 4 and your GMC? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

04-13-2009, 12:11 PM	#22
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: hubcaps for sale Special K; what do you mean by outter nub type? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

04-13-2009, 08:54 PM	#23
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: hubcaps for sale Nah, I'll take just the GMC send your paypal info with total price shipped to 30047 Thanks Mike

04-14-2009, 07:37 PM	#24
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: hubcaps for sale ok, Down south, how about $15 shipped for the gmc? My72BB how about $15 shipped for one of the top four? I'll wipe em down and send you the best one. Longhorn, that leaves 9 hubcaps. how about $90 shipped? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

04-15-2009, 07:06 PM	#25
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: hubcaps for sale Sounds good what's your paypal address? thanks Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.