FuelCellGuy- Forum Special on Fuel Cell- Till May 31* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 04-01-2009, 07:01 PM

For the month of April my custom built 18 gallon fuel cell with sending unit, fill tube (side fill, stake pocket fill, or marker light fill location), and mounting hardware will $425 + shipping (regular price $475 + shipping)

The fuel injection tank would be same as above plus $225 for in-tank fuel pump assembly.

If you need any additional info, please let me know.
Thanks,
Mark- The FuelCellGuy
www.aluminumfuelcell.com

jholley · 04-02-2009, 03:30 PM

Mark, Do you make a Top Fill/Bed fill tank?

jgrisafi · 04-02-2009, 07:53 PM

Do you have a shop in Cypress somewhere?

FuelCellGuy · 04-02-2009, 09:55 PM

jholley, yes, the filler is an additional $50.

jgrisafi, no, N2 posted this for me. I am in Mineola, Texas.

Dynomutt · 04-02-2009, 11:05 PM

Can these be picked up in Mineola? I'd like to have a first hand look at the fill options as well. I know some of the guys here use your cells and I've heard good things but I don't know that I have seen one of them (maybe I have but didn't note that it was one of yours). I did see the one on the web page though.

texanidiot25 · 04-03-2009, 12:03 AM

Crap, if this was only a few months later!

jholley · 04-03-2009, 07:03 AM

Quote:

Originally Posted by FuelCellGuy

jholley, yes, the filler is an additional $50.

jgrisafi, no, N2 posted this for me. I am in Mineola, Texas.

So the bed fill tank comes with a cap then?

**rob32472** · 04-03-2009, 07:47 AM

so does this include the pipe for the filler neck. i am doing the side marker filler let me know. Also shipping to 30157

killer71 · 04-03-2009, 09:33 AM

Quote:

Originally Posted by Dynomutt

Can these be picked up in Mineola? I'd like to have a first hand look at the fill options as well. I know some of the guys here use your cells and I've heard good things but I don't know that I have seen one of them (maybe I have but didn't note that it was one of yours). I did see the one on the web page though.

i bet you can pick it up there cuz that's what i done...I've used 2 of his tanks and the product is top notch...you can take my word this guy doesn't fool around....outstanding product!!!

FuelCellGuy · 04-03-2009, 12:37 PM

I just recently took a lot of pictures of the whole tank fabrication process. I will be posting those soon.

Dynomutt, yes they can be picked up here. I will be posting pictures of the different fill options soon.

jholley, yes it does.

rob32472, due to the infinate filler location possibilities, I do not supply the neck. However, any local muffler shop can fab up what you need relalivly inexpensively.

Thanks, Mark

jholley · 04-04-2009, 12:00 PM

I'm looking forward to the pics. I want one and can drive up there to get it.

lowbucktruck · 04-07-2009, 01:18 PM

Could you explain where this tank would be mounted? I visited your website, but didn't see any photos of the exact mounting location. Under-bed spare tire location, perhaps?

Separate question: I have a C20 camper special and would like to keep my stock aux tank location (saddle, behind cab). If I were to make some cardboard templates of my camper/saddle tank and send them to you, would you be able to give me a quote for fabbing an aluminum tank to those dimensions? (I still have the original aux tank, its a bit rusty inside)

FuelCellGuy · 04-08-2009, 07:03 PM

OK, here we go with the pictures. These show the tank baffles and end being cut on the CNC plasma.

lowbucktruck, the tank does mount in the spare tire location, and yes, I can built and tank you like.

FuelCellGuy · 04-08-2009, 07:09 PM

This shows the material thickness between our and most other tanks on the market. We use .125 wall aluminum, not .080 or .090.

FuelCellGuy · 04-08-2009, 07:27 PM

These pictures shown the basic construction of the tank.

FuelCellGuy · 04-08-2009, 07:31 PM

These show the INSIDE welds and the filler tube welded from the inside.

FuelCellGuy · 04-08-2009, 07:35 PM

This shows tanks ready for final welding as well as my solution to a sump for race applications. There is also a picture of a completed tank.

FuelCellGuy · 04-08-2009, 07:40 PM

The first picture shows the top of an in-tank fuel pump. The second and third shows a typical installation. Please feel free to post any questions or comments. Thanks, Mark

AKChevyman · 04-09-2009, 02:50 PM

Well that isn't what my tank looks like at all Mark. LOL

c10-affair · 04-16-2009, 04:25 PM

Quote:

Originally Posted by FuelCellGuy

jholley, yes, the filler is an additional $50.

jgrisafi, no, N2 posted this for me. I am in Mineola, Texas.

Do you have a picture of a tank that has a through the bed filler installed on it? Just wondering what type of cap it is and how it looks.

1971bigblock400 · 04-16-2009, 05:52 PM

Do you make a fule tank to relocate where my spare tire goes..?I have a 1971 longbed..

FuelCellGuy · 04-16-2009, 08:42 PM

c10-affair, I will have to dig one up.

1971bigblock400, that is where these mount.

1971bigblock400 · 04-16-2009, 10:42 PM

Oh i just saw the pics.LOL...after this month will you still have tanks to sell..I dont have the money right this sec.....Man i like how you make the tanks..they look realy good. I have been looking for one on lmc but they dont have any thing on yours..I cant wait to get my hands on one of them.

71cadc10 · 04-17-2009, 12:39 PM

question on the in tank pump assy, do you use a Walbro 255 or similar pump, or a stock GM ?
I'm looking for something to support some HP.

thanks and your work looks top notch

FuelCellGuy · 04-17-2009, 03:59 PM

71cadc10, looks like a Walbro 516.

04-01-2009, 07:01 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	FuelCellGuy- Forum Special on Fuel Cell- Till May 31* For the month of April my custom built 18 gallon fuel cell with sending unit, fill tube (side fill, stake pocket fill, or marker light fill location), and mounting hardware will $425 + shipping (regular price $475 + shipping) The fuel injection tank would be same as above plus $225 for in-tank fuel pump assembly. If you need any additional info, please let me know. Thanks, Mark- The FuelCellGuy www.aluminumfuelcell.com Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 08-13-2009 at 10:39 AM.

04-02-2009, 03:30 PM	#2
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Mark, Do you make a Top Fill/Bed fill tank? __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

04-02-2009, 07:53 PM	#3
jgrisafi Velocity Speed Shop Join Date: Jul 2007 Location: Cypress, TX Posts: 172	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Do you have a shop in Cypress somewhere? __________________ --------------------------------------------------- My Build Thread ..... http://67-72chevytrucks.com/vboard/s...d.php?t=288143 My Garage ..... http://www.hubgarage.com/mygarage/OCD69

04-02-2009, 09:55 PM	#4
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 jholley, yes, the filler is an additional $50. jgrisafi, no, N2 posted this for me. I am in Mineola, Texas.

04-02-2009, 11:05 PM	#5
Dynomutt Registered User Join Date: Mar 2009 Location: North Texas Posts: 440	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Can these be picked up in Mineola? I'd like to have a first hand look at the fill options as well. I know some of the guys here use your cells and I've heard good things but I don't know that I have seen one of them (maybe I have but didn't note that it was one of yours). I did see the one on the web page though. __________________ MARQ Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=446194

04-03-2009, 12:03 AM	#6
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Crap, if this was only a few months later!

04-03-2009, 07:47 AM	#8
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 so does this include the pipe for the filler neck. i am doing the side marker filler let me know. Also shipping to 30157

04-03-2009, 12:37 PM	#10
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 I just recently took a lot of pictures of the whole tank fabrication process. I will be posting those soon. Dynomutt, yes they can be picked up here. I will be posting pictures of the different fill options soon. jholley, yes it does. rob32472, due to the infinate filler location possibilities, I do not supply the neck. However, any local muffler shop can fab up what you need relalivly inexpensively. Thanks, Mark

04-04-2009, 12:00 PM	#11
jholley Registered User Join Date: Jul 2008 Location: TX Posts: 737	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 I'm looking forward to the pics. I want one and can drive up there to get it. __________________ ------------------------------------------------- Jim Garage fillers... 85 Chevy C10 Silverado LWB 07 Nissan Altima 2006 Mini Cooper S

04-07-2009, 01:18 PM	#12
lowbucktruck Registered User Join Date: Apr 2008 Location: Sacramento, California Posts: 62	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Could you explain where this tank would be mounted? I visited your website, but didn't see any photos of the exact mounting location. Under-bed spare tire location, perhaps? Separate question: I have a C20 camper special and would like to keep my stock aux tank location (saddle, behind cab). If I were to make some cardboard templates of my camper/saddle tank and send them to you, would you be able to give me a quote for fabbing an aluminum tank to those dimensions? (I still have the original aux tank, its a bit rusty inside) __________________ "Two rules get you through life: If it's stuck and it's not supposed to be, WD-40 it. If it's not stuck and it's supposed to be, duct tape it."

04-08-2009, 07:03 PM	#13
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 OK, here we go with the pictures. These show the tank baffles and end being cut on the CNC plasma. lowbucktruck, the tank does mount in the spare tire location, and yes, I can built and tank you like. Attached Images

04-08-2009, 07:09 PM	#14
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 This shows the material thickness between our and most other tanks on the market. We use .125 wall aluminum, not .080 or .090. Attached Images

04-08-2009, 07:27 PM	#15
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 These pictures shown the basic construction of the tank. Attached Images

04-08-2009, 07:31 PM	#16
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 These show the INSIDE welds and the filler tube welded from the inside. Attached Images

04-08-2009, 07:35 PM	#17
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 This shows tanks ready for final welding as well as my solution to a sump for race applications. There is also a picture of a completed tank. Attached Images



Register or Log In To remove these advertisements.

04-08-2009, 07:40 PM	#18
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 The first picture shows the top of an in-tank fuel pump. The second and third shows a typical installation. Please feel free to post any questions or comments. Thanks, Mark Attached Images Last edited by FuelCellGuy; 04-08-2009 at 07:42 PM.

04-09-2009, 02:50 PM	#19
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Well that isn't what my tank looks like at all Mark. LOL __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

04-16-2009, 05:52 PM	#21
1971bigblock400 Registered User Join Date: Apr 2009 Location: KATY,TX Posts: 2	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Do you make a fule tank to relocate where my spare tire goes..?I have a 1971 longbed..

04-16-2009, 08:42 PM	#22
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 c10-affair, I will have to dig one up. 1971bigblock400, that is where these mount.

04-16-2009, 10:42 PM	#23
1971bigblock400 Registered User Join Date: Apr 2009 Location: KATY,TX Posts: 2	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 Oh i just saw the pics.LOL...after this month will you still have tanks to sell..I dont have the money right this sec.....Man i like how you make the tanks..they look realy good. I have been looking for one on lmc but they dont have any thing on yours..I cant wait to get my hands on one of them.

04-17-2009, 12:39 PM	#24
71cadc10 Registered User Join Date: Apr 2004 Location: Boiling Springs, PA Posts: 435	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 question on the in tank pump assy, do you use a Walbro 255 or similar pump, or a stock GM ? I'm looking for something to support some HP. thanks and your work looks top notch __________________ 71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear

04-17-2009, 03:59 PM	#25
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: FuelCellGuy- Forum Special on Fuel Cell- Till April 30 71cadc10, looks like a Walbro 516.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.