WTB: Fleetside Outer fender wells - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'72 Chevy Suburban · 04-04-2009, 02:01 PM

I need a decent pair of outer fender wells for a fleetside and I believe that these were the same for long beds or short beds. They don't have to be completely rust free as I will patch a few small holes, if necessary. Specifically, I am looking for the part that is welded to the bed side and not the inner well that is bolted in. If someone has a set that they are interested in cutting out or knows if this is a part that is now reproduced as a patch panel, I appreciate the help.

Thanks,

**lks dcvn** · 04-04-2009, 02:03 PM

Get a pic of what you need John - I might have what you need up here in Toledo -

**special-K** · 04-04-2009, 03:23 PM

It`s the inner bedside panel behind the wheelhouse,right?

'72 Chevy Suburban · 04-04-2009, 07:48 PM

Quote:

Originally Posted by lks dcvn

Get a pic of what you need John - I might have what you need up here in Toledo -

Here is a pic, Dcvn.... This is looking at the inside of the panel with the wheelhouse removed:

Quote:

Originally Posted by special-K

It`s the inner bedside panel behind the wheelhouse,right?

That is correct, Special. Both outer wheelwells on both sides need to be replaced as does some of the flat metal that bolts to the wheelhouse.

It is hard to describe and I hope that the picture helps.

Thanks,

**special-K** · 04-04-2009, 10:10 PM

That`s exactly what I described.

'72 Chevy Suburban · 04-04-2009, 11:26 PM

Quote:

Originally Posted by special-K

That`s exactly what I described.

You got that right, Special...

**lks dcvn** · 04-06-2009, 09:32 AM

Checked the stash over the weekend - somebody cut them out of my spare bedsides (both sides) - guess the PO needed them for something else - so I don't have them after all...

'72 Chevy Suburban · 04-06-2009, 12:35 PM

Quote:

Originally Posted by lks dcvn

Checked the stash over the weekend - somebody cut them out of my spare bedsides (both sides) - guess the PO needed them for something else - so I don't have them after all...

Ok, Dcvn....

Thanks for checking.

olblue60@aol.com · 04-06-2009, 02:54 PM

They look easy to fabricate.?

'72 Chevy Suburban · 04-06-2009, 03:06 PM

Quote:

Originally Posted by olblue60@aol.com

They look easy to fabricate.?

I don't have the skills or tools to pull that one off. I could handle the flat metal on the inside panel, but not the curved outer wheelhousing. It certainly doesn't have to be perfect because this will never be a show truck and I'll probably put undercoating in there, but I want it to look close to what the originals look like.

rlm316 · 04-07-2009, 10:40 AM

Contact the guys over at Tri-Plus. They may have just what you need.

**special-K** · 04-07-2009, 01:07 PM

It`s always a shock to see that,sometimes on otherwise solid bedsides.If the are reproduced that would be a clean way to go.Good luck to ya.

jayharrell · 04-07-2009, 03:22 PM

I have a set of sides that i've cut some patches out of already. I'll double check if the inner wells are straight. I'll get you a pic when i get home.

'72 Chevy Suburban · 04-11-2009, 11:18 AM

Quote:

Originally Posted by rlm316

Contact the guys over at Tri-Plus. They may have just what you need.

Will do, thanks for the suggestion...

Quote:

Originally Posted by special-K

It`s always a shock to see that,sometimes on otherwise solid bedsides.If the are reproduced that would be a clean way to go.Good luck to ya.

The bedsides had the wheel arches replaced, but other than that they are solid, except for the outer wheelhouse. Probably some road salt involved....

Quote:

Originally Posted by jayharrell

I have a set of sides that i've cut some patches out of already. I'll double check if the inner wells are straight. I'll get you a pic when i get home.

I appreciate your checking Jay. Let me know,

jayharrell · 04-11-2009, 11:38 AM

Mine look about like yours do. I'll keep an eye out for yah though.

'72 Chevy Suburban · 04-11-2009, 11:46 AM

Quote:

Originally Posted by jayharrell

Mine look about like yours do. I'll keep an eye out for yah though.

Thanks for checking!

'72 Chevy Suburban · 05-04-2009, 12:19 PM

Can anyone help?

**Hart_Rod** · 05-04-2009, 01:01 PM

I might have what you need. I can't see your picture to say for sure. Take a look at my thread "parting a 71 suburban" and let me know.

R/

'72 Chevy Suburban · 05-05-2009, 12:11 PM

Quote:

Originally Posted by Hart_Rod

I might have what you need. I can't see your picture to say for sure. Take a look at my thread "parting a 71 suburban" and let me know.

R/

I just checked them out, Rob and it appears to be different on the Suburban. Thanks for the suggestion.

'72 Chevy Suburban · 05-13-2010, 02:28 PM

I'm hoping that a year will make a difference on this one, but... Does anyone know if these parts are being reproduced yet?

Thanks,

**John Fabris** · 05-13-2010, 03:04 PM

I have two sets of fleetside long bed sides, and was considering cutting up one set to make patch panels for another project. I can cut and save the inners for you. Let me know if you are interested. This would be from a 68 gold truck that I parted out, no rust.

'72 Chevy Suburban · 05-13-2010, 03:07 PM

Quote:

Originally Posted by John Fabris

I have two sets of fleetside long bed sides, and was considering cutting up one set to make patch panels for another project. I can cut and save the inners for you. Let me know if you are interested. This would be from a 68 gold truck that I parted out, no rust.

John,

I am definitely interested. Float me a price. Thanks!

**ScottH** · 05-23-2010, 09:47 AM

John not to steal your thread but I need one of these as well if anyone has an extra.
(hope u don't mind I jump in here, it would be difficult to duplicate the info in the thread).

Thanks.
Scott

'72 Chevy Suburban · 05-23-2010, 09:50 AM

[QUOTE=ScottH;3992287]John not to steal your thread but I need one of these as well if anyone has an extra.
(hope u don't mind I jump in here, it would be difficult to duplicate the info in the thread).

No problem at all, Scott. Jon, from Tri-Plus says that the aftermarket pieces will be available in about 2 weeks and they are $90 a side.

**t korinek** · 05-23-2010, 11:45 AM

I have a good pair I will cut out & ship for $100 total
Tom

04-04-2009, 02:01 PM	#1
'72 Chevy Suburban Chevy's Rock! Join Date: Apr 2004 Location: Lebanon, OH Posts: 448	WTB: Fleetside Outer fender wells I need a decent pair of outer fender wells for a fleetside and I believe that these were the same for long beds or short beds. They don't have to be completely rust free as I will patch a few small holes, if necessary. Specifically, I am looking for the part that is welded to the bed side and not the inner well that is bolted in. If someone has a set that they are interested in cutting out or knows if this is a part that is now reproduced as a patch panel, I appreciate the help. Thanks, __________________ John '59 NAPCO Pickup '70 K10 Pickup 350 '72 C20 Suburban 350 (MIA) '57 Chieftain 455 '68 Firebird Convertible - 400 '68 Catalina Convertible - 400 '85 Vette

04-04-2009, 02:03 PM	#2
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,346	Re: WTB: Fleetside Outer fender wells Get a pic of what you need John - I might have what you need up here in Toledo -

04-04-2009, 03:23 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: WTB: Fleetside Outer fender wells It`s the inner bedside panel behind the wheelhouse,right? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-04-2009, 10:10 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: WTB: Fleetside Outer fender wells That`s exactly what I described. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2009, 09:32 AM	#7
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,346	Re: WTB: Fleetside Outer fender wells Checked the stash over the weekend - somebody cut them out of my spare bedsides (both sides) - guess the PO needed them for something else - so I don't have them after all...

04-06-2009, 02:54 PM	#9
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: WTB: Fleetside Outer fender wells They look easy to fabricate.? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

04-07-2009, 10:40 AM	#11
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB: Fleetside Outer fender wells Contact the guys over at Tri-Plus. They may have just what you need.

04-07-2009, 01:07 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: WTB: Fleetside Outer fender wells It`s always a shock to see that,sometimes on otherwise solid bedsides.If the are reproduced that would be a clean way to go.Good luck to ya. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-07-2009, 03:22 PM	#13
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: WTB: Fleetside Outer fender wells I have a set of sides that i've cut some patches out of already. I'll double check if the inner wells are straight. I'll get you a pic when i get home. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"

04-11-2009, 11:38 AM	#15
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: WTB: Fleetside Outer fender wells Mine look about like yours do. I'll keep an eye out for yah though. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"

05-04-2009, 12:19 PM	#17
'72 Chevy Suburban Chevy's Rock! Join Date: Apr 2004 Location: Lebanon, OH Posts: 448	Re: WTB: Fleetside Outer fender wells Can anyone help? __________________ John '59 NAPCO Pickup '70 K10 Pickup 350 '72 C20 Suburban 350 (MIA) '57 Chieftain 455 '68 Firebird Convertible - 400 '68 Catalina Convertible - 400 '85 Vette

05-04-2009, 01:01 PM	#18
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: WTB: Fleetside Outer fender wells I might have what you need. I can't see your picture to say for sure. Take a look at my thread "parting a 71 suburban" and let me know. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-13-2010, 02:28 PM	#20
'72 Chevy Suburban Chevy's Rock! Join Date: Apr 2004 Location: Lebanon, OH Posts: 448	Re: WTB: Fleetside Outer fender wells I'm hoping that a year will make a difference on this one, but... Does anyone know if these parts are being reproduced yet? Thanks, __________________ John '59 NAPCO Pickup '70 K10 Pickup 350 '72 C20 Suburban 350 (MIA) '57 Chieftain 455 '68 Firebird Convertible - 400 '68 Catalina Convertible - 400 '85 Vette

05-13-2010, 03:04 PM	#21
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: WTB: Fleetside Outer fender wells I have two sets of fleetside long bed sides, and was considering cutting up one set to make patch panels for another project. I can cut and save the inners for you. Let me know if you are interested. This would be from a 68 gold truck that I parted out, no rust. __________________ John Fabris 67 C10 SWB

05-23-2010, 09:47 AM	#23
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Fleetside Outer fender wells John not to steal your thread but I need one of these as well if anyone has an extra. (hope u don't mind I jump in here, it would be difficult to duplicate the info in the thread). Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

05-23-2010, 09:50 AM	#24
'72 Chevy Suburban Chevy's Rock! Join Date: Apr 2004 Location: Lebanon, OH Posts: 448	Re: WTB: Fleetside Outer fender wells [QUOTE=ScottH;3992287]John not to steal your thread but I need one of these as well if anyone has an extra. (hope u don't mind I jump in here, it would be difficult to duplicate the info in the thread). No problem at all, Scott. Jon, from Tri-Plus says that the aftermarket pieces will be available in about 2 weeks and they are $90 a side. __________________ John '59 NAPCO Pickup '70 K10 Pickup 350 '72 C20 Suburban 350 (MIA) '57 Chieftain 455 '68 Firebird Convertible - 400 '68 Catalina Convertible - 400 '85 Vette

05-23-2010, 11:45 AM	#25
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB: Fleetside Outer fender wells I have a good pair I will cut out & ship for $100 total Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.