|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-05-2009, 10:29 PM
|
#1 |
|
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
250 points to hei question
engine seems to run a little rough now? can i use the same plugs,and is the gap different between points and hei? also what is the base timing supposed to be?thanks
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE" 
|
|
|
|
04-05-2009, 10:41 PM
|
#2 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,037
|
Re: 250 points to hei question
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 04-05-2009 at 10:42 PM. |
|
|
|
|
|
04-05-2009, 10:42 PM
|
#3 |
|
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
Re: 250 points to hei question
whats the stock specs for timing?
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"
|
|
|
|
|
04-05-2009, 11:23 PM
|
#4 |
|
Too Dumb To Know Better
Join Date: Nov 2005
Location: Texas
Posts: 882
|
Re: 250 points to hei question
Gap them to .045 or .050 and you'll have better luck. I think the timing is 6 or 8 degrees BTDC.
|
|
|
|
|
04-05-2009, 11:26 PM
|
#5 |
|
"the other guy"
Join Date: Oct 2008
Location: Olivehurst California 95961
Posts: 901
|
Re: 250 points to hei question
"low'n slow" is the decal i just had made for my 67. thanks for the info
__________________
God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
