LMC now has the 8ft metal bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70' GMC · 04-07-2009, 10:01 AM

Has anyone here heard of it yet and I was wondering was it better thant the one at chevy duty?

**leddzepp** · 04-07-2009, 10:56 AM

I think they are all manufactured by the same company.

69chevybmx · 04-07-2009, 11:07 AM

I was interested in this also but for the price of the floor shipped, one could source a complete bed (or truck).

**special-K** · 04-07-2009, 12:36 PM

Yup,those parts can out late last year.Thanks for the heads up.I`m sure your favorite vendor can get them to you.

67ChevyRedneck · 04-07-2009, 12:55 PM

I saw them at charlotte this past weekend. They actually looked pretty good.

jb4short · 04-07-2009, 01:08 PM

Quote:

Originally Posted by leddzepp

I think they are all manufactured by the same company.

they're not

**leddzepp** · 04-07-2009, 01:11 PM

OK, then how many companies make them?

jb4short · 04-07-2009, 02:50 PM

Quote:

Originally Posted by leddzepp

OK, then how many companies make them?

the 8' bedside = 2 manufacturers

**leddzepp** · 04-07-2009, 03:46 PM

Quote:

Originally Posted by Tri-ProAutomotive

the 8' bedside = 2 manufacturers

cool

red71c10 · 04-07-2009, 08:20 PM

If I only had the money......

texanidiot25 · 04-07-2009, 10:43 PM

How strong are they?

thirdstreettito · 04-07-2009, 11:33 PM

Not very, just like all the other repop metal. I'm selling a rust free/original paint 8' fleet metal floor. Much stronger.

*72lb4x4* · 04-08-2009, 12:02 AM

I want that bed floor, but no doubt shipping would be murder. Any ideas?

thirdstreettito · 04-08-2009, 12:03 AM

I should be driving out to TX in the summer.

*72lb4x4* · 04-08-2009, 12:13 AM

There are 2 swap meets this month why wait! Just kidding.
Please PM me if you remember when the time comes.

red71c10 · 04-08-2009, 01:32 AM

Quote:

Originally Posted by thirdstreettito

Not very, just like all the other repop metal. I'm selling a rust free/original paint 8' fleet metal floor. Much stronger.

I have seen some patch panels offered that are 19 gauge instead of 21, are these any better?

jb4short · 04-08-2009, 07:27 AM

Quote:

Originally Posted by red71c10

I have seen some patch panels offered that are 19 gauge instead of 21, are these any better?

21ga. = .0359in thick or 1.342lb sq. ft
19ga. = .0418in think or 1.705lb sq. ft

red71c10 · 04-08-2009, 09:14 PM

Quote:

Originally Posted by Tri-ProAutomotive

21ga. = .0359in thick or 1.342lb sq. ft
19ga. = .0418in think or 1.705lb sq. ft

What gauge are your panels?

jb4short · 04-10-2009, 11:49 AM

Quote:

Originally Posted by red71c10

What gauge are your panels?

typically 19. A few that are outsourced are thinner and later model stuff ('99- Silverado) is heavier

ERASER5 · 04-10-2009, 01:35 PM

The thread title is a bit ambiguous. Are we talking about bed sides or bed floors? Or both?

flat_mountain · 04-10-2009, 01:59 PM

Quote:

Originally Posted by ERASER5

The thread title is a bit ambiguous. Are we talking about bed sides or bed floors? Or both?

both, I priced them through goodmark. $750 per side and $1000 for the floor a while back. I've got less invested in my whole truck so far and drive it daily...

red71c10 · 04-10-2009, 02:43 PM

Quote:

Originally Posted by flat_mountain

both, I priced them through goodmark. $750 per side and $1000 for the floor a while back. I've got less invested in my whole truck so far and drive it daily...

Me too. I'm not looking to turn mine into a show truck. I just want to fix the rust and make a solid good looking DD out of it. I'll be buying patch panels to fix the problems with the cab, but when the time comes, I'm pretty sure I'll be trying to track down a used bed that's better than the one I have now. Unless win the lottery!

**leddzepp** · 04-10-2009, 02:49 PM

Quote:

Originally Posted by flat_mountain

both, I priced them through goodmark. $750 per side and $1000 for the floor a while back. I've got less invested in my whole truck so far and drive it daily...

Same here

**kwmech** · 04-10-2009, 03:22 PM

So now what they need to provide is an addtional 6'' piece for the longhorns

70LonghornCST · 04-10-2009, 05:14 PM

Does anyone know if these beds can be married with the 6 inch front section of Longhorn to make a Longhorn bed?

04-07-2009, 10:01 AM	#1
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	LMC now has the 8ft metal bed Has anyone here heard of it yet and I was wondering was it better thant the one at chevy duty? __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

04-07-2009, 10:56 AM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,001	Re: LMC now has the 8ft metal bed I think they are all manufactured by the same company.

04-07-2009, 11:07 AM	#3
69chevybmx Registered User Join Date: Nov 2007 Location: South Bend, IN Posts: 83	Re: LMC now has the 8ft metal bed I was interested in this also but for the price of the floor shipped, one could source a complete bed (or truck).

04-07-2009, 12:36 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: LMC now has the 8ft metal bed Yup,those parts can out late last year.Thanks for the heads up.I`m sure your favorite vendor can get them to you. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-07-2009, 12:55 PM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: LMC now has the 8ft metal bed I saw them at charlotte this past weekend. They actually looked pretty good. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

04-07-2009, 01:11 PM	#7
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,001	Re: LMC now has the 8ft metal bed OK, then how many companies make them?

04-07-2009, 08:20 PM	#10
red71c10 The Red Menace Join Date: Feb 2009 Location: Roseburg, OR Posts: 577	Re: LMC now has the 8ft metal bed If I only had the money...... __________________ 1971 Custom 10 - 350/350TH - Pwr steering, gauges, Chrome front bumper, Chrome hubcaps, Door edge guards, HD rear springs (current) 1968 C-20 Custom Camper - 350/350TH (orig 327), Pwr steering & brakes, gauges w/tach (former) 1968 C-20 - 307/3sp column (Dad's when I was a kid) "Driving is like coloring. Things get messy if you can't stay inside the lines."

04-07-2009, 10:43 PM	#11
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: LMC now has the 8ft metal bed How strong are they?

04-07-2009, 11:33 PM	#12
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: LMC now has the 8ft metal bed Not very, just like all the other repop metal. I'm selling a rust free/original paint 8' fleet metal floor. Much stronger. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

04-08-2009, 12:02 AM	#13
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: LMC now has the 8ft metal bed I want that bed floor, but no doubt shipping would be murder. Any ideas? Last edited by 72lb4x4; 04-08-2009 at 12:03 AM.

04-08-2009, 12:03 AM	#14
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: LMC now has the 8ft metal bed I should be driving out to TX in the summer. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

04-08-2009, 12:13 AM	#15
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: LMC now has the 8ft metal bed There are 2 swap meets this month why wait! Just kidding. Please PM me if you remember when the time comes.

04-10-2009, 01:35 PM	#20
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: LMC now has the 8ft metal bed The thread title is a bit ambiguous. Are we talking about bed sides or bed floors? Or both? __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60 Last edited by ERASER5; 04-10-2009 at 01:36 PM.

04-10-2009, 03:22 PM	#24
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,514	Re: LMC now has the 8ft metal bed So now what they need to provide is an addtional 6'' piece for the longhorns

04-10-2009, 05:14 PM	#25
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: LMC now has the 8ft metal bed Does anyone know if these beds can be married with the 6 inch front section of Longhorn to make a Longhorn bed? __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 04-10-2009 at 05:14 PM.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.