Someone might want to check this out in OREGON - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**fine69** · 04-08-2009, 01:23 PM

http://oregoncoast.craigslist.org/cto/1078148177.html

monte0185 · 04-08-2009, 02:03 PM

1980 ish??? LOL thats too funny!!

67ChevyRedneck · 04-08-2009, 02:18 PM

Not really, I've been told by a few people that "My dad (or grandpa, uncle, brother, etc) used to have a 79 that looked just like yours."

That's pretty cheap.

**Stocker** · 04-08-2009, 02:19 PM

Obviously she (assume it's a she) has no clue what it is... might be a good project on the cheap!

monte0185 · 04-08-2009, 02:32 PM

If "SHE" is selling it then it maybe one of those grudge things against her ex!! My buddy picked up a 68 chevy II that way for 500$. We put some tires on it and pulled it up on the trailor and got it home and popped the hood and low and behold there was an all roller 427 with aluminum heads pushing close to 700 horses under the hood. Apparently after talking to her after that it was her car but her boyfriend had been fixing it up for himself. He had not gotten to the body work other than to put it in primer and it had no wheels on it it was sitting on blocks. She threw him out and had no idea what all he had done to the car and didnt care.

**kwmech** · 04-08-2009, 03:10 PM

Some one in oregon should be able to pick it up for say 200.00ish

sleepertruck72 · 04-08-2009, 05:45 PM

Uncover that tarp and you may find a nice interior with bucket seats, tilt column, A/C, am/fm radio... or not. maybe they meant it was primered in the 80's ?

red71c10 · 04-08-2009, 07:16 PM

Quote:

Originally Posted by kwmech

Some one in oregon should be able to pick it up for say 200.00ish

Hmmm...I am going to have to replace my rusty bed at some point, but don't really want to have to buy an entire truck to do it.

04-08-2009, 01:23 PM	#1
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Someone might want to check this out in OREGON http://oregoncoast.craigslist.org/cto/1078148177.html __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

04-08-2009, 02:03 PM	#2
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: Someone might want to check this out in OREGON 1980 ish??? LOL thats too funny!! __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together. Last edited by monte0185; 04-08-2009 at 02:03 PM.

04-08-2009, 02:18 PM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Someone might want to check this out in OREGON Not really, I've been told by a few people that "My dad (or grandpa, uncle, brother, etc) used to have a 79 that looked just like yours." That's pretty cheap. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 04-08-2009 at 02:18 PM.

04-08-2009, 02:19 PM	#4
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,728	Re: Someone might want to check this out in OREGON Obviously she (assume it's a she) has no clue what it is... might be a good project on the cheap! __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

04-08-2009, 02:32 PM	#5
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: Someone might want to check this out in OREGON If "SHE" is selling it then it maybe one of those grudge things against her ex!! My buddy picked up a 68 chevy II that way for 500$. We put some tires on it and pulled it up on the trailor and got it home and popped the hood and low and behold there was an all roller 427 with aluminum heads pushing close to 700 horses under the hood. Apparently after talking to her after that it was her car but her boyfriend had been fixing it up for himself. He had not gotten to the body work other than to put it in primer and it had no wheels on it it was sitting on blocks. She threw him out and had no idea what all he had done to the car and didnt care. __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

04-08-2009, 03:10 PM	#6
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: Someone might want to check this out in OREGON Some one in oregon should be able to pick it up for say 200.00ish

04-08-2009, 05:45 PM	#7
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: Someone might want to check this out in OREGON Uncover that tarp and you may find a nice interior with bucket seats, tilt column, A/C, am/fm radio... or not. maybe they meant it was primered in the 80's ? __________________ 72 C20 Longbed 05 1500 Z71

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.