I need a picture of a 62 transmission cross member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chucks1967 · 04-30-2009, 02:18 PM

my buddy and I have been looking everywhere for a reproduction cross member for a 62 c20 but have been unsuccessufl I guess unless someone on here has a better Idea we will be frabracating one. If some one would be so kinds as to post a pic of theirs so I can get and Idea of what the original looks like.

**slepysal** · 04-30-2009, 03:24 PM

not oe but try this link
http://persh.org/pickup/UnderTheHood.htm#Crossmember

chucks1967 · 04-30-2009, 03:37 PM

Quote:

Originally Posted by slepysal

not oe but try this link
http://persh.org/pickup/UnderTheHood.htm#Crossmember

Thanks, The link never siad exactly what year the frame/truck was. I believe 60-62 are the same but 63-66 are different. Thanks again..

Any one else can help out with some pics from 60-62 of the trans cross member I would sure appreciate it.

**slepysal** · 04-30-2009, 04:11 PM

Quote:

Originally Posted by chucks1967

Thanks, The link never siad exactly what year the frame/truck was. I believe 60-62 are the same but 63-66 are different. Thanks again..

Any one else can help out with some pics from 60-62 of the trans cross member I would sure appreciate it.

Yes you are correct the 60-62 frames ( torsion bar susp)Are the same 63-66 ( front coil susp) are the same The oe Trans cross member is rare, and when (if) you find one pricey
Good luck

chucks1967 · 05-01-2009, 11:11 AM

..gona bump this. I really need a good pic of an oe trans cross member. Thanks,

**slepysal** · 05-01-2009, 05:02 PM

Man I've looked all over , cant find a pic !!! Some one has to have one

padresag · 05-01-2009, 05:56 PM

there is a picture or illustration on one in the assy manual. I think that it may have been used only with a hydramatic application, which would have only been used in the GMC's and it fits into the x frame
what I don't know is whether or not that they used the p/glide in the chevs from 60-62 and if the did ; did they use a rear trans mount or was it bellhousing mounted? and that will answer that part of that question as if they rear mounted a cast iron p/glide then there would be a similiar crossmember
ron

if one needed a crossmember for there. it would not be difficult to fabricate , but I doubt that you would be able to buy a reay made one

**slepysal** · 05-01-2009, 06:26 PM

At one time I was bidding on one on ebay , it sold for 300.00!!

padresag · 05-01-2009, 06:30 PM

how far did you bid?
ron

**slepysal** · 05-01-2009, 07:19 PM

Quote:

Originally Posted by padresag

how far did you bid?
ron

I stoped at 125.00 , didnt need it. I was surprised to see it sell for so much. If I need one I'll fab one up

hewlett2002000 · 05-01-2009, 10:08 PM

well i have a 62 frame sitting in my shop that im fixing to get rid of one way or another. nobody seems to want it. it had a powerglide in it factory so i dont know if it would be the right one, but you can have the crossmember from it if it will help you. lemme know.
John

chucks1967 · 05-04-2009, 09:21 AM

Hey hewlett, I just sent you a PM.

chucks1967 · 05-11-2009, 09:31 AM

No one.... its hard to believe there are so few 62 guys on here..

1Bad62Pro/Street · 05-13-2009, 03:07 PM

Not much help.....but better than nothing.
Yes...... There are leaks every where!!!!!!!!.

04-30-2009, 02:18 PM	#1
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	I need a picture of a 62 transmission cross member my buddy and I have been looking everywhere for a reproduction cross member for a 62 c20 but have been unsuccessufl I guess unless someone on here has a better Idea we will be frabracating one. If some one would be so kinds as to post a pic of theirs so I can get and Idea of what the original looks like.

04-30-2009, 03:24 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: I need a picture of a 62 transmission cross member not oe but try this link http://persh.org/pickup/UnderTheHood.htm#Crossmember __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

05-01-2009, 11:11 AM	#5
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	Re: I need a picture of a 62 transmission cross member ..gona bump this. I really need a good pic of an oe trans cross member. Thanks,

05-01-2009, 05:02 PM	#6
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: I need a picture of a 62 transmission cross member Man I've looked all over , cant find a pic !!! Some one has to have one __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 05-01-2009 at 05:02 PM.

05-01-2009, 05:56 PM	#7
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: I need a picture of a 62 transmission cross member there is a picture or illustration on one in the assy manual. I think that it may have been used only with a hydramatic application, which would have only been used in the GMC's and it fits into the x frame what I don't know is whether or not that they used the p/glide in the chevs from 60-62 and if the did ; did they use a rear trans mount or was it bellhousing mounted? and that will answer that part of that question as if they rear mounted a cast iron p/glide then there would be a similiar crossmember ron if one needed a crossmember for there. it would not be difficult to fabricate , but I doubt that you would be able to buy a reay made one Last edited by padresag; 05-01-2009 at 05:58 PM.

05-01-2009, 06:26 PM	#8
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: I need a picture of a 62 transmission cross member At one time I was bidding on one on ebay , it sold for 300.00!! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

05-01-2009, 06:30 PM	#9
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: I need a picture of a 62 transmission cross member how far did you bid? ron

05-01-2009, 10:08 PM	#11
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: I need a picture of a 62 transmission cross member well i have a 62 frame sitting in my shop that im fixing to get rid of one way or another. nobody seems to want it. it had a powerglide in it factory so i dont know if it would be the right one, but you can have the crossmember from it if it will help you. lemme know. John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-04-2009, 09:21 AM	#12
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	Re: I need a picture of a 62 transmission cross member Hey hewlett, I just sent you a PM.

05-11-2009, 09:31 AM	#13
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	Re: I need a picture of a 62 transmission cross member No one.... its hard to believe there are so few 62 guys on here..

05-13-2009, 03:07 PM	#14
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: I need a picture of a 62 transmission cross member Not much help.....but better than nothing. Yes...... There are leaks every where!!!!!!!!. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.