WTB 73-87 front sway bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stealthy '69 · 05-14-2009, 10:07 AM

I'm looking for a good used front sway bar from a 3/4 or 1 ton 2WD. I would like it to have all the brackets if possible but not necessary. It also doesn't need to have the bushings, I'm get new ones anyway.

Tony@AirRideTech · 05-14-2009, 10:35 AM

crap.... I trashed my OE bar and brackets...... sorry man

stealthy '69 · 05-14-2009, 10:46 AM

I figured here might be a bit of a long shot, but hey you never know. I'll keep looking around here at junk yards and walmart parking lots

stealthy '69 · 05-14-2009, 11:09 AM

Quote:

Originally Posted by Tony@AirRideTech

crap.... I trashed my OE bar and brackets...... sorry man

any idea what you would've wanted for if you still had it? trying to figure out what I'm gonna spend.

79gmcc15 · 05-14-2009, 02:24 PM

I got mine for twenty bucks w/c-clamps. plus 33 shipped for the brackets *from a bored member* that go to the frame. bushings are going to run ya about 20 bucks for the good stuff. then bolts, haven't prices that out yet. if the bolts from the donor car are still good, you could run those. I want to switch to grade 8 my self just to be on the safe side. the more you can take from the donor car the better. so if you have tools to bust off rivets, I would do it. make sure you get the c-clamps. I got my sway bar off craigslist from a guy that is parting out his truck. I know of a few around here that we might be able to get including a one ton that had one. but shipping will be a "b".

stealthy '69 · 05-14-2009, 02:33 PM

Yea I figured shipping would be a lot. That's kind of why I'm hoping to get one real cheap so I can afford to ship it. My plans are to get all the brackets from the donor, but hardware isn't an issue I can get them from work for free. Grade 5 or stainless.

Driveway Dreams · 05-14-2009, 03:09 PM

I have the original from my 86 C-10. If you want it let me know. PM me. And, I am not too far away so shipping can be figured out. Or a meet you half way one weekend sort of thing.

stealthy '69 · 05-14-2009, 03:14 PM

Quote:

Originally Posted by Driveway Dreams

I have the original from my 86 C-10. If you want it let me know. PM me. And, I am not too far away so shipping can be figured out. Or a meet you half way one weekend sort of thing.

I would prefer a 3/4 or 1 ton but If nothing comes up in the next week or so I'll PM you and let you know. In the mean time do you have all the brackets? And could you figure shipping to 68127? Thanks

Driveway Dreams · 05-14-2009, 10:34 PM

I do have the "c" type brackets for around the bar. I do not have an extra set of mounts for it though. I got one off of a Suburban that I was getting some other parts off of. So, I have my stocker just hanging out in the garage. Just let me know if you want it.

thirdstreettito · 05-14-2009, 11:12 PM

There is a yard near by I'm going to next week. They have a few 3/4t with sway bars. I'll see if I can get one for ya.

stealthy '69 · 05-16-2009, 04:20 AM

Quote:

Originally Posted by thirdstreettito

There is a yard near by I'm going to next week. They have a few 3/4t with sway bars. I'll see if I can get one for ya.

Thanks, could you figure the price with shiooing to 68127 please.

turp mcspray · 05-16-2009, 11:06 AM

How big of a hurry are you in? I have an 82 3/4 ton that I am going to part out . The truck is 99% complete. I live in Rapid City so shipping shouldn't be too bad. I'm just not sure how soon I can get to it. Let me know if you can't find one and I'll help you out if I can. Scott

stealthy '69 · 05-17-2009, 06:13 PM

No big hurry this is my daily driver so no biggie. PM me when your ready to part it out.

turp mcspray · 05-18-2009, 12:42 PM

I will let you know. I've been wanting to part it but haven't had time.I am self employed so that consumes most of my time. I am hoping to get to it in the next month or so. Scott

stealthy '69 · 05-18-2009, 06:32 PM

Thanks for every one posting up and helping me out. I got one located that is correct for my truck that I'll be getting. Thanks again to every one.

Tony@AirRideTech · 05-19-2009, 10:27 AM

Quote:

Originally Posted by stealthy '69

any idea what you would've wanted for if you still had it? trying to figure out what I'm gonna spend.

A six pack........ and freight.

05-14-2009, 10:07 AM	#1
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	WTB 73-87 front sway bar I'm looking for a good used front sway bar from a 3/4 or 1 ton 2WD. I would like it to have all the brackets if possible but not necessary. It also doesn't need to have the bushings, I'm get new ones anyway.

05-14-2009, 10:35 AM	#2
Tony@AirRideTech Junior Member Join Date: Feb 2005 Location: Huntingburg IN Posts: 620	Re: WTB 73-87 front sway bar crap.... I trashed my OE bar and brackets...... sorry man

05-14-2009, 10:46 AM	#3
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: WTB 73-87 front sway bar I figured here might be a bit of a long shot, but hey you never know. I'll keep looking around here at junk yards and walmart parking lots

05-14-2009, 02:24 PM	#5
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: WTB 73-87 front sway bar I got mine for twenty bucks w/c-clamps. plus 33 shipped for the brackets from a bored member that go to the frame. bushings are going to run ya about 20 bucks for the good stuff. then bolts, haven't prices that out yet. if the bolts from the donor car are still good, you could run those. I want to switch to grade 8 my self just to be on the safe side. the more you can take from the donor car the better. so if you have tools to bust off rivets, I would do it. make sure you get the c-clamps. I got my sway bar off craigslist from a guy that is parting out his truck. I know of a few around here that we might be able to get including a one ton that had one. but shipping will be a "b". __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

05-14-2009, 02:33 PM	#6
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: WTB 73-87 front sway bar Yea I figured shipping would be a lot. That's kind of why I'm hoping to get one real cheap so I can afford to ship it. My plans are to get all the brackets from the donor, but hardware isn't an issue I can get them from work for free. Grade 5 or stainless.

05-14-2009, 03:09 PM	#7
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: WTB 73-87 front sway bar I have the original from my 86 C-10. If you want it let me know. PM me. And, I am not too far away so shipping can be figured out. Or a meet you half way one weekend sort of thing. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

05-14-2009, 10:34 PM	#9
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: WTB 73-87 front sway bar I do have the "c" type brackets for around the bar. I do not have an extra set of mounts for it though. I got one off of a Suburban that I was getting some other parts off of. So, I have my stocker just hanging out in the garage. Just let me know if you want it. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

05-14-2009, 11:12 PM	#10
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: WTB 73-87 front sway bar There is a yard near by I'm going to next week. They have a few 3/4t with sway bars. I'll see if I can get one for ya. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

05-16-2009, 11:06 AM	#12
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: WTB 73-87 front sway bar How big of a hurry are you in? I have an 82 3/4 ton that I am going to part out . The truck is 99% complete. I live in Rapid City so shipping shouldn't be too bad. I'm just not sure how soon I can get to it. Let me know if you can't find one and I'll help you out if I can. Scott

05-17-2009, 06:13 PM	#13
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: WTB 73-87 front sway bar No big hurry this is my daily driver so no biggie. PM me when your ready to part it out.

05-18-2009, 12:42 PM	#14
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: WTB 73-87 front sway bar I will let you know. I've been wanting to part it but haven't had time.I am self employed so that consumes most of my time. I am hoping to get to it in the next month or so. Scott

05-18-2009, 06:32 PM	#15
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: WTB 73-87 front sway bar Thanks for every one posting up and helping me out. I got one located that is correct for my truck that I'll be getting. Thanks again to every one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.