Roll Pan Guys, Got a Tape Measure? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddpile · 05-18-2009, 06:54 PM

I'm doing some tailgate fabbing at the moment, and my roll pan has not arrived yet. A slight inconvenience, so my question is, can someone measure how tall a standard purchased roll pan is, top edge to bottom? That will give me an idea as to how long to make my gate, etc.

Thanks!

psychorodder · 05-18-2009, 07:47 PM

Mine is 7 inches top to bottom

muddpile · 05-19-2009, 12:42 AM

Thanks man! That'll help me out huge and save me some time in rough figuring until mine gets here.

63 & 64 Bowties · 05-19-2009, 06:50 AM

That's weird. Mine's 8" It's a Counterpart item from LMC

muddpile · 05-20-2009, 01:36 AM

Hmmmm. With a 1" variance like that, I'll wait til mine gets here. It could be 6", or even 9", who knows nowadays? Thanks guys!

64GMCHorsepower · 05-20-2009, 08:29 PM

Where did you order it from? I bought mine from MAr-K and it is 8.5 inches I believe. I checked before I got to work. I will double check when I get home in a couple of hours.

**scotts62** · 05-20-2009, 09:30 PM

7 on mine i got it from Mar-k

64GMCHorsepower · 05-20-2009, 11:12 PM

I just checked again.....8" on mine........Are they different between step and fleetside?

muddpile · 05-21-2009, 01:29 AM

Mine is coming from Scott's Super Trucks in Penhold, Alberta and I'm unsure of the make. Oh well, it should arrive pretty fast.

**scotts62** · 05-21-2009, 07:47 AM

Quote:

Originally Posted by 64GMCHorsepower

I just checked again.....8" on mine........Are they different between step and fleetside?

They must its kinda looking that way. I wouldn't have thought there would be.

63 & 64 Bowties · 05-21-2009, 10:25 AM

Mine's a fleetside, so it's looking like fleetsides are 8 and stepsides are 7. muddpile didn't say which he had.

joe231 · 05-21-2009, 10:27 AM

Muddpile has a fleet, see his sig...

63 & 64 Bowties · 05-21-2009, 10:37 AM

Quote:

Originally Posted by joe231

Muddpile has a fleet, see his sig...

oh yea, duh
Muddpile, it's gonna be 8" then.

joe231 · 05-21-2009, 10:40 AM

muddpile · 05-24-2009, 01:54 PM

Haha, thanks guys, I'll mock it up and tack in for 8". If it happens to be 7" or something crazy, I can always change it, it's only sheetmetal and 1" of material. I'm actually doing a full skin on the back of the Tornado, so no more view of the mufflers and back of the big block when following it down the highway.

The new reproduction bed corners are in (fit great) as is the inner tailgate and top edge. The back tailgate skin and roll pan are all that are left to be welded in, ground smooth and bodyworked. The exhaust, tailgate, and tail lights are all kind of wild, surprise ideas.

Thanks and I'll be sure to post pics!

05-18-2009, 06:54 PM	#1
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Roll Pan Guys, Got a Tape Measure? I'm doing some tailgate fabbing at the moment, and my roll pan has not arrived yet. A slight inconvenience, so my question is, can someone measure how tall a standard purchased roll pan is, top edge to bottom? That will give me an idea as to how long to make my gate, etc. Thanks! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

05-18-2009, 07:47 PM	#2
psychorodder Registered User Join Date: Jan 2007 Location: ga Posts: 37	Re: Roll Pan Guys, Got a Tape Measure? Mine is 7 inches top to bottom

05-19-2009, 12:42 AM	#3
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Roll Pan Guys, Got a Tape Measure? Thanks man! That'll help me out huge and save me some time in rough figuring until mine gets here. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

05-19-2009, 06:50 AM	#4
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Roll Pan Guys, Got a Tape Measure? That's weird. Mine's 8" It's a Counterpart item from LMC Attached Images __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

05-20-2009, 01:36 AM	#5
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Roll Pan Guys, Got a Tape Measure? Hmmmm. With a 1" variance like that, I'll wait til mine gets here. It could be 6", or even 9", who knows nowadays? Thanks guys! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

05-20-2009, 08:29 PM	#6
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Roll Pan Guys, Got a Tape Measure? Where did you order it from? I bought mine from MAr-K and it is 8.5 inches I believe. I checked before I got to work. I will double check when I get home in a couple of hours. __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

05-20-2009, 09:30 PM	#7
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Roll Pan Guys, Got a Tape Measure? 7 on mine i got it from Mar-k __________________ Scott 93 crew cab build Project 62

05-20-2009, 11:12 PM	#8
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Roll Pan Guys, Got a Tape Measure? I just checked again.....8" on mine........Are they different between step and fleetside? __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

05-21-2009, 01:29 AM	#9
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Roll Pan Guys, Got a Tape Measure? Mine is coming from Scott's Super Trucks in Penhold, Alberta and I'm unsure of the make. Oh well, it should arrive pretty fast. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

05-21-2009, 10:25 AM	#11
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Roll Pan Guys, Got a Tape Measure? Mine's a fleetside, so it's looking like fleetsides are 8 and stepsides are 7. muddpile didn't say which he had. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

05-21-2009, 10:27 AM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Roll Pan Guys, Got a Tape Measure? Muddpile has a fleet, see his sig... __________________ *CHEVY ONLY*

05-21-2009, 10:40 AM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Roll Pan Guys, Got a Tape Measure? __________________ *CHEVY ONLY*

05-24-2009, 01:54 PM	#15
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Roll Pan Guys, Got a Tape Measure? Haha, thanks guys, I'll mock it up and tack in for 8". If it happens to be 7" or something crazy, I can always change it, it's only sheetmetal and 1" of material. I'm actually doing a full skin on the back of the Tornado, so no more view of the mufflers and back of the big block when following it down the highway. The new reproduction bed corners are in (fit great) as is the inner tailgate and top edge. The back tailgate skin and roll pan are all that are left to be welded in, ground smooth and bodyworked. The exhaust, tailgate, and tail lights are all kind of wild, surprise ideas. Thanks and I'll be sure to post pics! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.