Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-18-2009, 04:17 PM | #1 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Parting out 71 LWB GMC
It's a 71 GMC with a 69-70 chevy front end. I bought this truck mainly for the cowl and firewall for my Jezabel project. I have removed the parts I need and therefore I am parting it out from here. It has a 305 w/th350 tranny and coil spring rear. Take a look at the pics and let me know if you see anything you need. I may keep the 5 lug setup I have not made my mind up there.
Steve
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 04:29 PM | #2 |
Registered User
Join Date: Feb 2008
Location: Gulfport, MS
Posts: 99
|
Re: Parting out 71 LWB GMC
I need a good seat, is it for sale?
|
06-18-2009, 04:54 PM | #3 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Absolutely. I have never shipped something that large though. I don't think it will be cheap. If you are willing to pick it up it's yours for $75. Let me know.
Thanks Steve
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 04:54 PM | #4 |
Registered User
Join Date: Jan 2009
Location: florida
Posts: 172
|
Re: Parting out 71 LWB GMC
slinding rear window, lower molding,steering wheel, are they in good shape? If so where are you located in Florida?
|
06-18-2009, 04:57 PM | #5 |
Registered User
Join Date: Feb 2009
Location: deland florida
Posts: 117
|
Re: Parting out 71 LWB GMC
how are youre doors?
|
06-18-2009, 05:12 PM | #6 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Re: Parting out 71 LWB GMC
slinding rear window, lower molding,steering wheel, are they in good shape? If so where are you located in Florida? I am in Sanderson, Fl. Just off I-10 about 30 mi west of Jacksonville, 20 mi east of I-75. The steering wheel has some cracks in it. The rear window is in decent shape though I would not put it on a show truck. The mouldings are driver quality. Let me know if you are interested and I will take some close up pics for you. 386kustoms Re: Parting out 71 LWB GMC how are youre doors? Both doors were cut for speakers (2- 2x9's in each door). The drivers side is trash (skin loose on front corner). The passenger door is not too bad with just a few small holes. I also have a few other doors as well from other trucks. None are rust free though. Let me know if you want to see some pics. Thanks guys for the interest, Steve
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 05:22 PM | #7 |
Registered User
Join Date: Jan 2009
Location: florida
Posts: 172
|
Re: Parting out 71 LWB GMC
You are about 3 hours away. close up pic of steer wheel and moldings and rear window.
|
06-18-2009, 05:45 PM | #8 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,787
|
Re: Parting out 71 LWB GMC
How nice are the door panels? I am interested if they are nice. Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
06-18-2009, 05:51 PM | #9 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Re: Parting out 71 LWB GMC
How nice are the door panels? I am interested if they are nice. Eric Eric, the door panels were cut for speakers. I don't think you will want them. I will be posting some pics in a few and you can see what I am talking about. Thanks, Steve
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 06:27 PM | #10 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Here are the pics of the mouldings (some pieces good some a little beat up), rear window, doors, front fenders, dr. inner fenders. I still need to get a pic of the Steering wheel. I haven't forgotten you David. More to come.... :-)
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 06:32 PM | #11 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Continued:::::
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 06:35 PM | #12 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Continued:::::
The mirrors are in real good shape.
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 06:58 PM | #13 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Steering wheel pics. David, it's cracked in three places. Two where the middlebar connects to the column, and one about 12 O'Clock on the wheel itself. Not sure if you would want it. Let me know.
Thanks, Steve
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-18-2009, 09:27 PM | #14 |
I Like Mine With No Shine!
Join Date: Apr 2009
Location: SC
Posts: 2,705
|
Re: Parting out 71 LWB GMC
Condition and price of the carpet, stereo (if factory), auto column (minus steering wheel), and cigarette lighter assembly?
__________________
Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 |
06-18-2009, 09:50 PM | #15 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,787
|
Re: Parting out 71 LWB GMC
You are right, the door panels are messed up. Thanks for the pics, but i will pass...
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
06-19-2009, 01:34 AM | #16 |
Registered User
Join Date: Feb 2009
Location: Indianapolis, IN
Posts: 372
|
Re: Parting out 71 LWB GMC
I would be interested in the inner fenders if they only have surface rust and are solid....shipped to 46037
Thanks, Rich |
06-19-2009, 08:29 AM | #17 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
wancosc356
Re: Parting out 71 LWB GMC Condition and price of the carpet, stereo (if factory), auto column (minus steering wheel), and cigarette lighter assembly? The carpet was aftermarket and trash. As for the stereo it was a CD aftermarket deal. The auto column is in good shape, still has all wiring in place as well as the neutral safety switch, turn signal and shifter. The cigarette lighter assembly is in good shape as well. The lighter itself is not original. Stainless bezel is not bent and shines good. Hows $75 shipped for the column and cigarette lighter assembly? Let me know. too much stuff No problem. IndyRich The passenger side inner fender was trash like most of them are because of leaking batteries over time. The dr side inner fender is in good shape. Just some surface rust like you can see in the pic above. If you want it how does $50 sound + shipping? Let me know. Thanks guys for your interest.
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-19-2009, 08:56 AM | #18 |
Registered User
Join Date: Jan 2009
Location: stuart florida
Posts: 59
|
Re: Parting out 71 LWB GMC
do you have hood ? if so conditon and price. 71/72 front bumper? condition and price. thanks Mark
|
06-19-2009, 11:01 AM | #19 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
e: Parting out 71 LWB GMC
do you have hood ? if so conditon and price. 71/72 front bumper? condition and price. thanks Mark Mark, The hood is in good shape. It has three small dings about 1/8" deep on the dr side. You can see them in the pic. There is also a section on the bullnose there it appears there is some mud under the paint. Probably over a dent. Just below that is what I had initially thought was a bad rusted spot. After peeling back the mid I found some surface rust and two very small pinholes. That spot on the bottom is only sand. After uploading the pic I noticed that and went back out to verify that it was not a bad spot. It wiped off. That is about all I can find wrong with it. If you want it, you can have it for $100 but you will have to pick it up. As for the bumper, you said you are looking for a 71/72 bumper. This one is for a 67-70 model. I have someone interested in the bumper, if you want it I can put you 2nd in line just let me know. I am selling it for $50 because it has a spot on the dr side where the chrome is flacking, other than that it's in good shape.
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-19-2009, 01:41 PM | #20 |
Registered User
Join Date: Jan 2009
Location: stuart florida
Posts: 59
|
Re: Parting out 71 LWB GMC
i,l pass on bumper, the ruston the hood on driver,s side pinch weld concerns me could i get a closer pic of that aeria ? thanks Mark
|
06-19-2009, 02:09 PM | #21 |
Project collector
Join Date: Mar 2006
Location: Sanderson, Fl
Posts: 700
|
Re: Parting out 71 LWB GMC
Hi Mark,
Here are a few more close-up pics. I took a wire brush on a drill to it so you can tell a little better that is not that bad. I also took a picture of the back side so you can see that it does not go that far in. Thanks, Steve
__________________
69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! |
06-19-2009, 04:29 PM | #22 | |
I Like Mine With No Shine!
Join Date: Apr 2009
Location: SC
Posts: 2,705
|
Re: Parting out 71 LWB GMC
Quote:
__________________
Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 |
|
06-20-2009, 10:08 PM | #23 |
Registered User
Join Date: Jan 2009
Location: florida
Posts: 172
|
Re: Parting out 71 LWB GMC
The steering wheel and the trim I'm going to pass on. I just bought another truck and the roof and the drip edge molding is rusted thru. can I get pics of that. If not rusted out I'm interesed in that plus the back window.
|
06-20-2009, 11:12 PM | #24 |
Registered User
Join Date: Feb 2009
Location: Indianapolis, IN
Posts: 372
|
Re: Parting out 71 LWB GMC
Thanks , but I'll pass on the inner fender.I might as well find both instead of just one.
|
06-20-2009, 11:19 PM | #25 |
Account Suspended
Join Date: May 2009
Location: Asheville, NC
Posts: 75
|
Re: Parting out 71 LWB GMC
what is the shape of the vent window assemblies? how much for the vent window assemblies shipped to 28787?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|