Stainless Steel Headers for SBC

[westofb]

I have for sale a set of Stainless Steel Headers for SBC in 1988-98 trucks and am asking $75.00 OBO plus actual shipping. I bought this set of headers for a 69 Chevy truck, but they would not fit due to them contacting the frame rails. These have never been used but there is a few issues with them that I feel needs to be mentioned. As stated before, I was trying to get these to fit a 69 Chevy, the passenger side fit with no problems, the driver side was the problem. These are mid length headers and the exhaust flange on the driver side was contacting the inside of the frame rail. I dented the pipes on the bottom sides near the head and near the collector in an attempt to get the exhaust flange to pull in closer to the engine block. All efforts failed to get them to bend so I had to go another route. The dents placed in the driver side header will not effect it's functionality and from the engine compartment, they will not be noticable. These are new and include the mounting bolts and collectors and I paid over $250.00 for them. Respond in thread if interested. I will get photos of the headers and the dents mentioned above in a day or two. Thanks, Jeff.

[truckpoorpackrat]

I'm interested. Can you post or pm a picture of these, & quote shipping to zip 64801 business. Thanks, James.

[worley91]

put me in line for pictures and a shipping quote to 61360

Thanks, Dan

[westofb]

Originally Posted by truckpoorpackrat

I'm interested. Can you post or pm a picture of these, & quote shipping to zip 64801 business. Thanks, James.

ok you are first in line, will get photos and try to get idea on shipping cost tomorrow.

[westofb]

Originally Posted by worley91

put me in line for pictures and a shipping quote to 61360

Thanks, Dan

you are 2nd in line...see quote above

[worley91]

okay thanks.

[truckpoorpackrat]

Sounds good, do you know what brand they are. Thanks James.

[westofb]

Okay, I dug them out of storage today...but then it started raining so I did not get pics yet. I do not know what brand these headers are, the box they came in says kmc or something similar to that. I also notice a couple of things missing... I have the collectors and the headers, but am missing all the bolts and the collector flanges. I talked to my friend that has access to my storage, he took them to replace the headers on his truck. I will do my best to get pics tomorrow, so remember, these are the headers and collectors, no bolts, no collector flanges (flanges are still on the headers and they are the run of the mill 3" 3 bolt pattern flanges). If these gliches have made you lose interest, I understand, if not I will keep everyone in order by their response to this add. Sorry about the missing pieces did not buddy had helped himself to my stash of parts.

[truckpoorpackrat]

I guess I will pass for now, maybe the information you have posted is enough for someone else to buy these headers. Good luck with your sale, stainless headers for 75.00 is a excellent price, I just needed a picture to make sure they would be a exact replacement for the pace setter ones I have on my truck. Thanks anyway, James.
Your up worley91

[worley91]

Gotta pass also.

[rlm316]

I'll step in line and wait for pics.

[westofb]

Originally Posted by rlm316

I'll step in line and wait for pics.

okay I guess your 1st in line....am going to try to upload pics!

[westofb]

pic 1 is of dented area on driver side header, was dented in an attempt to gain clearance where it was closest to frame rail.
pic 2 is close up of dented area (should be near impossible to see from engine compartment).
pic 3 and 4 all items included in sale
pic 5 is close up of driver side bung for O2 sensor, includes plug if not needed for your application.

Sorry it took so long to get pics uploaded!

[rlm316]

Thanks for the pics, too much of an angle for me to use. Good luck on the sale.

[PT'S 70 CST]

What brand are these and do you have the part# for them.

Thanks PT

[worley91]

may step back in line if I get the shipping quote I asked for

[westofb]

Originally Posted by worley91

may step back in line if I get the shipping quote I asked for

How about $90.00 shipped to your door?

[westofb]

Originally Posted by PT'S 70 CST

What brand are these and do you have the part# for them.

Thanks PT

I don't know what brand they are, may have a part number on the box will have to look. They are designed to fit 88-98 chevy trucks with sbc. They will not hook up to factory exhaust without some modifications.

[PT'S 70 CST]

I have a 94 and if you can get me a part # and brand to make sure they will work you may have a deal.

PT

[westofb]

Originally Posted by PT'S 70 CST

I have a 94 and if you can get me a part # and brand to make sure they will work you may have a deal.

PT

I looked at the box they came in, there is no part number on the box it simply says for 88-98 chevy truck. I bought these knowing they were for a 88 & up truck, I knew the shape (shape of the down tubes, the way they sweep back) was correct to fit my 69 chevy, however after getting them, found that they protruded too far from the block and made just barely made contact with the frame rail. I tried to modify them to fit (see pics of dents) with no luck, so here they are for sale.

I am changing the price to $85.00 shipped to your door (as long as it is in the lower 48). That way I don't have to screw with shipping quotes, and if you truly want them you know up front the costs.

[westofb]

Lets see worley is first in line followed by pt.

[PT'S 70 CST]

Do you even know who they are made by.

PT

[westofb]

No, no idea who made them, don't know part number, only know they are stainless steel, have thick exhaust flanges where they bolt to the head (3/8" I think), have a driver side bung for an O2 sensor and a plug for it if it is not needed, have standard 3" 3 bolt collector flange, are designed to fit 88 to 98 chevy trucks with small block chevy, and are brand new never ran (have been test fitted)....that is all I know about them. I am sure whoever buys them will be very happy with them.

[toomanytoyz]

can i get placed in the Lineup?

Rick

[Scott Johnson]

I will take them for $85 shipped if it gets to me.