Attn: DALLAS area members - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CustomChevy · 01-04-2003, 08:32 PM

Hey guys, I just wanted to clue you Dallas/Ft. Worth guys into a local salvage yard that has lots of parts for our trucks. This place is in the east end of Grand Prairie on Jefferson. It's called BUY RITE Salvage. They have at least 6 trucks of the 73-87 variety plus a few other trucks from the 67-72 variety including a very nice short fleetside bed.....

SCOTI · 01-05-2003, 02:37 AM

Did you notice if any had decent blazer/burb bumpers?

Txstruck · 01-05-2003, 09:20 AM

Were the dashes any good on them?

Prerunner1982 · 01-05-2003, 03:06 PM

steve, i might be able to get you a dash, matter what color?

CustomChevy · 01-05-2003, 03:16 PM

The dashes looked to be "padless", but most parts were there.

Didn't look real close at the bumpers, but I do remember seeing a few intact.

Txstruck · 01-05-2003, 03:21 PM

Quote:

Originally posted by Prerunner1982
steve, i might be able to get you a dash, matter what color?

Not particulary, I prefer black or brown. Now I dont think it would look right with like bright orange or yellow.

:p

Prerunner1982 · 01-05-2003, 03:26 PM

lol, with no cracks and can be painted? i will see what i can do..

Txstruck · 01-05-2003, 04:19 PM

YOU are the MAN Jon!! Thanx a million!

Prerunner1982 · 01-06-2003, 12:52 PM

ok, still havent asked my buddy about the dash... but i did find these on ebay...

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1876240706

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1876241190

BigRed · 01-06-2003, 02:50 PM

Quote:

Originally posted by Prerunner1982
ok, still havent asked my buddy about the dash... but i did find these on ebay...

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1876240706

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1876241190

Uggh, those are high for eBay! Then, you have to pay shipping. I know Steve is holding out for that good deal like me!

The DFW swap meet has better deals then that so you may want to hold out.

Prerunner1982 · 01-06-2003, 03:10 PM

i will talk to my buddy tomorrow!

01-04-2003, 08:32 PM	#1
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	Attn: DALLAS area members Hey guys, I just wanted to clue you Dallas/Ft. Worth guys into a local salvage yard that has lots of parts for our trucks. This place is in the east end of Grand Prairie on Jefferson. It's called BUY RITE Salvage. They have at least 6 trucks of the 73-87 variety plus a few other trucks from the 67-72 variety including a very nice short fleetside bed.....

01-05-2003, 02:37 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Looking for some bumpers . . . Did you notice if any had decent blazer/burb bumpers? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-05-2003, 09:20 AM	#3
Txstruck Registered User Join Date: Nov 2002 Location: Dallas Posts: 459	Looking for dash pads (86) Were the dashes any good on them? __________________ Steve 86 K30 4x4 6.2L Diesel\TH400\NP208 - 14bolt FF rear w/detroit locker and Dana60 front w/detroit locker- both with 4.56 gears "Runs on Mud"

01-05-2003, 03:06 PM	#4
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	steve, i might be able to get you a dash, matter what color? __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

01-05-2003, 03:26 PM	#7
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	lol, with no cracks and can be painted? i will see what i can do.. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

01-05-2003, 03:16 PM	#5
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	The dashes looked to be "padless", but most parts were there. Didn't look real close at the bumpers, but I do remember seeing a few intact.

01-05-2003, 04:19 PM	#8
Txstruck Registered User Join Date: Nov 2002 Location: Dallas Posts: 459	YOU are the MAN Jon!! Thanx a million! __________________ Steve 86 K30 4x4 6.2L Diesel\TH400\NP208 - 14bolt FF rear w/detroit locker and Dana60 front w/detroit locker- both with 4.56 gears "Runs on Mud"

01-06-2003, 12:52 PM	#9
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	ok, still havent asked my buddy about the dash... but i did find these on ebay... http://cgi.ebay.com/ebaymotors/ws/eB...tem=1876240706 http://cgi.ebay.com/ebaymotors/ws/eB...tem=1876241190

01-06-2003, 03:10 PM	#11
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	i will talk to my buddy tomorrow! __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.