![]() |
![]() |
#1 |
BOHICA
Join Date: Mar 2008
Location: Stewartville, MN
Posts: 440
|
Bed removal
I have a 68 LWB with a wood bed. Can I just pull the bed mounts and remove it with all the wood in it, or do I have to disassemble the wood floor first?
__________________
Trying to save someone from their own stupidity is like teaching a pig to dance. It is a waste of your time, and it annoys the pig! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2006
Location: Porter Ranch, CA
Posts: 978
|
Re: Bed removal
You should be able to just unbolt the bed from the frame and lift it off. Don't forget to disconnect the taillight harness!
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2006
Location: Riverside California
Posts: 160
|
Re: Bed removal
Actually there should be 8 bolts on 2 boards that connect the wood to the frame, remove those and the 4 bolts that hold the bed to the frame then you can remove it. This is not a very good picture, but you can see the bolts on the wood, the third board from top to bottom..
Leo.
__________________
Leo70 ![]() 1970 Chevy Shortbed 1956 Chevy 210 Post 1963 Chevy Impala SS Rag..SOLD! ![]() |
![]() |
![]() |
![]() |
#4 |
BOHICA
Join Date: Mar 2008
Location: Stewartville, MN
Posts: 440
|
Re: Bed removal
Thanks.
__________________
Trying to save someone from their own stupidity is like teaching a pig to dance. It is a waste of your time, and it annoys the pig! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|