|
07-20-2009, 04:41 AM
|
#1 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
"Made Bail"
I had started a thread on my build previous but removed it for some reason. Cant remember. So, again, my truck. It ended up in this state after a long chase with the fuzz! Blew the motor (but got away) and tore it apart for a rebuild. Long story short it was parked in '95 in a field to wait after the first attempt at a ground up. I returned Oct. 10, 2008 to retrieve it for it's much overdue 2nd chance at life. Since October "Made Bail" has recieved a 2x4/2x6 full frame with a Fatman Fab Mustang II front clip (reworked) and a Suicidedoors heavy duty four link. Slams front and rear. B.A.D's newest in 22x8.5 and 22x10. 10 bolt S-10 rearend. Fronts are 265/30 and rears are 295/25. Front pan is from Grant Kustoms along with his new hood hinges for 67-72 trucks. Cool hinges if your trying to tuck big wheels. A 66 C10 smoothed dash was welded in, shaved the drip rail and unshaved the doors. I like the door handles much better. Molded in a bottle top popper where the org fuel neck was for convenience! In the near future Im hoping to throw in a 327/700r combo and drive....for now this is my truck. Might not ever paint, then again?
*NO REGRETS* North Texas Chapter Last edited by rustSpot; 08-10-2009 at 01:01 PM. |
|
|
|
07-20-2009, 04:47 AM
|
#2 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
More....
|
|
|
|
|
07-20-2009, 04:50 AM
|
#3 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Pic below is "ride height". The fronts turn lock to lock! Last pic is how it sits at the present time.
Last edited by rustSpot; 07-20-2009 at 04:18 PM. |
|
|
|
|
07-20-2009, 05:26 AM
|
#4 |
|
Registered User
Join Date: Sep 2008
Location: CASA GRANDE AZ
Posts: 4,276
|
Re: "Made Bail"
Wow that truck looks great as is even without paint
__________________
70 SWB STEPSIDE 70 BLAZER 09 challenger |
|
|
|
|
07-20-2009, 08:10 AM
|
#5 |
|
Formerly- 1972SuperCheyenne
 
Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: "Made Bail"
Damn that's a low ride height. Gonna be sweet.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
|
|
|
|
07-20-2009, 08:56 AM
|
#6 |
|
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: "Made Bail"
good looking truck..
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
|
|
|
|
07-20-2009, 08:58 PM
|
#7 |
|
Registered User
Join Date: Jun 2007
Location: DFW (Forney)
Posts: 1,529
|
Re: "Made Bail"
Very cool truck.
I recognize that Dodge in the pic above ,is it yours? If it is I think I've talked to you before somewhere.
__________________
'58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5 |
|
|
|
|
07-20-2009, 09:15 PM
|
#8 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Thanks guys. The Dodge is my wifes. It's definetely a possibility (69chevyshort) we've spoke but I'd have to be reminded of when and where without seein a face!
|
|
|
|
|
07-20-2009, 09:23 PM
|
#9 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Here's the only pics I have of the hinges for those who have I.M. me. I'll see if I can find a pic before they were welded on. These hinges are two piece. One plate welded to the inside (under) the cowl and the other to the hood. A bolt at the center pivots the two. Nice, clean and sturdy. $60 through Grant Kustoms.
|
|
|
|
|
07-20-2009, 09:26 PM
|
#10 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Also, the bottle top popper....from Coca-Cola!
|
|
|
|
|
07-21-2009, 05:31 AM
|
#11 |
|
Village Idiot....
Join Date: Jul 2003
Location: Rowlett, Texas
Posts: 1,833
|
Re: "Made Bail"
I know you have a dash picture somewhere
__________________
http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold |
|
|
|
|
07-21-2009, 10:43 AM
|
#12 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Only one I have!
Last edited by rustSpot; 07-21-2009 at 10:44 AM. |
|
|
|
|
07-21-2009, 12:57 PM
|
#13 |
|
Registered User
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
|
Re: "Made Bail"
That is one sweet rideyou have there, would you happen to have a pic of just the frame all done? Great build btw. Jealous of the rims!
__________________
James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 |
|
|
|
|
07-21-2009, 07:53 PM
|
#14 | |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Quote:
|
|
|
|
|
|
07-22-2009, 09:40 AM
|
#15 |
|
Under Construction
Join Date: Oct 2007
Location: Midlothian,TX (DFW)
Posts: 4,555
|
Re: "Made Bail"
sweet ride Rustspot!
__________________
Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 |
|
|
|
|
07-22-2009, 11:15 AM
|
#16 | |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Quote:
|
|
|
|
|
|
07-22-2009, 12:43 PM
|
#17 |
|
On the fast track to nowhere..
Join Date: May 2006
Location: Splendora, Texas
Posts: 5,316
|
Re: "Made Bail"
What made you decide against the pro-street style tires? Did they not fit under the stepside fenders?
__________________
-Mike Owen- Norwood, Houston, Cecilia, Jackson, Monroe and counting |
|
|
|
|
07-22-2009, 11:03 PM
|
#18 |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
They did fit and looked nice. I would've needed a 20 x 12 or wider wheel. Really needed a x 14 or x 15. Then B.A.D. showed me a wheel design noone had and I liked the wheel so much I had to roll that direction. I have the tires still. Brand new.
|
|
|
|
|
07-22-2009, 11:19 PM
|
#19 |
|
Account Suspended
Join Date: Oct 2008
Location: Gulfport, Ms
Posts: 833
|
Re: "Made Bail"
Rust Spot, you brought your truck to my show in Biloxi, Scrapin' The Coast, Badass bro! Cant wait til you finish it.
|
|
|
|
|
07-22-2009, 11:29 PM
|
#20 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: "Made Bail"
Subscribed!
Wow.... this is one sick build!
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
|
07-22-2009, 11:31 PM
|
#21 |
|
Registered User
Join Date: Oct 2008
Location: Houston, Tx
Posts: 469
|
Re: "Made Bail"
Look good! I've seen your truck at the Somerville show and I beleive others around Houston. How much you pay for the wheels? Does BAD make 24 x 14 wide wheels?
Keep it up!
__________________
1968 Chevy Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=321717 1959 Chevy Apache 3100 SWB Big Window http://67-72chevytrucks.com/vboard/s...d.php?t=597069 |
|
|
|
|
07-23-2009, 12:12 AM
|
#22 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
Re: "Made Bail"
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
07-23-2009, 02:44 AM
|
#23 | |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Quote:
|
|
|
|
|
|
07-23-2009, 02:44 AM
|
#24 | |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Quote:
|
|
|
|
|
|
07-23-2009, 02:46 AM
|
#25 | |
|
*NO REGRETS*
Join Date: Oct 2006
Location: Rockwall, Texas
Posts: 498
|
Re: "Made Bail"
Quote:
|
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
