Blazer/Burb bumpers needed.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 01-07-2003, 04:13 PM

for my 74 in the N.Tx area. I've already got a decent stock 74 front but need a clean chrome rear w/brackets or I would consider putting later model bumpers from a 81-87 if I can find them w/brackets. Any help would be appreciated.

pkbinplano · 01-08-2003, 09:30 AM

There is a salvage yard north of Whyle off 78 that I believe had a stock bumper on a burb. What part of Dallas you live in ? Maybe we can hook up Sat and go check it out. Big10 and I did about a month ago.

SCOTI · 01-08-2003, 12:28 PM

I'm in the Garland/Rowlett area off of I-30. What wrecking yard?? Discount or Roy millers? I went out to Blacklands in Rockwall just before Thanksgiving & they had several burbs but all of them had damaged bumpers. I'm going to give my parts connection guy @ the chevy dealership a heads-up & see if he can locate me some new or used.

Another yard that did have several of 73-ups is out in Nevada off HWY 6/Lavon HWY. That's where I got all my disc conversion stuff for my 68 but I haven't had much time to make it back out there & see what their inventory is these days.

pkbinplano · 01-08-2003, 10:10 PM

This one is out 78 north. From Wylie. Guy has piles of stuff inside an old shack. A few rigs sitting out back. Its where I got my front sway bar.

SCOTI · 01-08-2003, 10:48 PM

Both Discount & millers are the first yards on the left side of 78 in between Sachse & Wylie.

**crossy** · 01-08-2003, 11:23 PM

the burb brackets are different because the frame is. I have a rear one from 78 P/U complete with gravel guards ( the little metal pans on the top) . DAVE

bigblock73 · 01-09-2003, 12:05 AM

Quote:

Originally posted by crossy
the burb brackets are different because the frame is. I have a rear one from 78 P/U complete with gravel guards ( the little metal pans on the top) . DAVE

Dave, are you willing to sell the gravel gaurds seperate and if so, what kind of shape are they in (dents, rust?) and how much are you looking for?

TIA - Jeff

**crossy** · 01-09-2003, 06:46 AM

nah, but I'll do this for you. the GM part number is 325467 for both sides. DAVE

79BIG10 · 01-09-2003, 07:53 AM

Scoti- That's the one Pbkinplano and I went to (in Nevada). He crushed a bunch of trucks he said. He did get alot of stuff from them though. I know he had a burb out there but not sure about the bumber on back.

SCOTI · 01-09-2003, 08:27 AM

I try & make it out there when I can cause the guy @ C&H is pretty nice to me. My parents live just up the road off of HWY 6 so anytime they need automotive related parts or towing they go to him.
Funny story: The last time I went out there my old man was actually standing @ the counter, I came in beside him & stood there for several miutes (he even turned & saw me) before he realized his own son was standing next to him. I don't have kids of my own but I would hope if they came up beside me I would recognize them immediately!

SCOTI · 01-14-2003, 11:15 AM

Went out Sat am & still no luck so.....ttt.

01-07-2003, 04:13 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Blazer/Burb bumpers needed.... for my 74 in the N.Tx area. I've already got a decent stock 74 front but need a clean chrome rear w/brackets or I would consider putting later model bumpers from a 81-87 if I can find them w/brackets. Any help would be appreciated. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-08-2003, 09:30 AM	#2
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	There is a salvage yard north of Whyle off 78 that I believe had a stock bumper on a burb. What part of Dallas you live in ? Maybe we can hook up Sat and go check it out. Big10 and I did about a month ago. __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

01-08-2003, 12:28 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	I'm in the Garland/Rowlett area off of I-30. What wrecking yard?? Discount or Roy millers? I went out to Blacklands in Rockwall just before Thanksgiving & they had several burbs but all of them had damaged bumpers. I'm going to give my parts connection guy @ the chevy dealership a heads-up & see if he can locate me some new or used. Another yard that did have several of 73-ups is out in Nevada off HWY 6/Lavon HWY. That's where I got all my disc conversion stuff for my 68 but I haven't had much time to make it back out there & see what their inventory is these days. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-08-2003, 10:10 PM	#4
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	This one is out 78 north. From Wylie. Guy has piles of stuff inside an old shack. A few rigs sitting out back. Its where I got my front sway bar. __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

01-08-2003, 10:48 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Both Discount & millers are the first yards on the left side of 78 in between Sachse & Wylie. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-08-2003, 11:23 PM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	bumpers the burb brackets are different because the frame is. I have a rear one from 78 P/U complete with gravel guards ( the little metal pans on the top) . DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

01-09-2003, 06:46 AM	#8
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	parts nah, but I'll do this for you. the GM part number is 325467 for both sides. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

01-09-2003, 07:53 AM	#9
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Scoti- That's the one Pbkinplano and I went to (in Nevada). He crushed a bunch of trucks he said. He did get alot of stuff from them though. I know he had a burb out there but not sure about the bumber on back. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

01-09-2003, 08:27 AM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	I try & make it out there when I can cause the guy @ C&H is pretty nice to me. My parents live just up the road off of HWY 6 so anytime they need automotive related parts or towing they go to him. Funny story: The last time I went out there my old man was actually standing @ the counter, I came in beside him & stood there for several miutes (he even turned & saw me) before he realized his own son was standing next to him. I don't have kids of my own but I would hope if they came up beside me I would recognize them immediately! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-14-2003, 11:15 AM	#11
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Went out Sat am & still no luck so.....ttt. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.