outer floor section

[bigbadchev72]

Hey guys im about ready to order up some replacement panels for my 67' gonna be doing rockers and the usual in that area. I was looking at the outer floor section, but would like to know how far it replaces into the floor pan from the weatherstriping lip. Dont want to have to order a floorpan panel to have to use 1" of it. here is a pic of what i am looking at getting

[lolife99]

Contact member "Tri-Pro Automotive".
He can help you out.
This is their website.
http://www.tri-proautomotive.com/servlet/StoreFront

[powell72]

Those are the panels I'm using also, they go 4'' in from the inner rocker. Here you go-

[bigbadchev72]

Originally Posted by lolife99

Contact member "Tri-Pro Automotive".
He can help you out.
This is their website.
http://www.tri-proautomotive.com/servlet/StoreFront

his prices are way high compared to others i have been finding

Powell72 thank you that is exactly what i was looking for

[powell72]

Those are actually less then I paid, I gave $75 each for mine.

[Green Machine]

Going to be doing the same thing soon to our C20, that one piece should be a lot better to fit rather using several generic pieces. Check with board vendor MBGMIKE, he has good prices.

[bigbadchev72]

mikes bump and grind garage has them for $43 each

[jsmithbm]

Originally Posted by powell72

Those are the panels I'm using also, they go 4'' in from the inner rocker. Here you go-

Not trying to be a thread hijacker but do you have any more photos of your rocker replacement?

[powell72]

I didn't take any rocker pics but this thread is very helpful-

http://67-72chevytrucks.com/vboard/s...d.php?t=271066

[Sinister]

powell72 any tips on replacing the outer cab floor? How was it cutting the old floor out, do you have to be careful of the supports underneath?

[mbgmike]

Originally Posted by bigbadchev72

mikes bump and grind garage has them for $43 each

Yes we do. Same MFG. we try to keep our overhead down to offer lower prices. We don't have goofy sales on inflated prices or raise the price to offer free shipping. Nothing is free and people still fall for that. We just try to sell at a price people can afford.

This is a very good part and it is one that installs great. We install this stuff as well as sell products and this is a good one

here is link to part if interested

http://estore.websitepros.com/126980...SEC/Detail.bok

[powell72]

Originally Posted by Sinister

powell72 any tips on replacing the outer cab floor? How was it cutting the old floor out, do you have to be careful of the supports underneath?

The lower A-pillar and bottom of the kick panel need to be removed to replace this part because of the way everything is sandwiched together. I was replacing my supports also when I installed this piece, so I didn't need to be too careful, but if your's are okay you need to take care when cutting the old piece out so you don't cut into it. Make sure you have all the spot welds removed. The supports are spot welded to the floor.

Take your time and don't rush the fitting, sneak up on it. Notice in my pic how I cut the piece in half, I found it easier as a novice to fit two small pieces and weld them back together then fit one big piece.

Also realize the back of the cab is spot welded to the to the rear of this piece, another area to take care if you're not replacing cab corners.

Hope this helps, I'm definitely no expert, just some knob who can weld learning on the fly.

[Reefmonster]

subscribed