pics of trucks witha 3/5 drop? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

threeonthetree · 08-24-2009, 02:05 PM

thinking about dropping my truck with a 3/5 drop from ece
just getting the rear 5'' drop kit and cutting the fronts

could i go with the rear 6" drop kit and still be able to cut the springs to a 4" drop?
or will i need different springs for the front?
or spindles i don't have disk and don't have to money to spend on new disk brakes.
will it bottom out on the frame if i don't c notch?
thanks

big_al_71 · 08-24-2009, 02:34 PM

Here is an old pict of my truck with 3/5 drop cut springs and 5 inch in the rear...It rode like crap specially in the front the back was just fine.

threeonthetree · 08-24-2009, 02:49 PM

The front was bad
What was bad about it?
What size rims are those?

Gumby'sC20 · 08-24-2009, 03:06 PM

cutting the springs on anything will decrease ride quality by a long shot, especially over time.

threeonthetree · 08-24-2009, 03:09 PM

Any pics of long boxes? 3/5 4/6?

threeonthetree · 08-24-2009, 03:16 PM

Well later on I'll get spindels and such so the front would be tempary.
Could u chop the front to a 4" drop?

threeonthetree · 08-26-2009, 12:18 AM

How many coils did u cut off for that drop?

jbristo67 · 08-26-2009, 02:49 AM

dont go over three inches off the front coils

threeonthetree · 08-26-2009, 02:53 AM

Yeah I know what would give me a 3
I heard one full coil before
Would that do it

jbristo67 · 08-26-2009, 02:56 AM

one full coil is generally 2. I have had alot of trucks with front cut springs and the all road great

threeonthetree · 08-26-2009, 03:22 AM

Yeah as long as I get drop shocks It should be alright is what Im thinking I'll be fine
So can I cut one and a half and have the spring seat right?
Any pictures of a longbed or short with a 3/5 on 15inch rims

72BLKCHEYENNE · 08-26-2009, 07:31 AM

Here is mine with a 4/5 drop.........18 in the front and 20 in the rear,
hope this helps.........rick

big_al_71 · 08-26-2009, 08:11 AM

Quote:

Originally Posted by threeonthetree

The front was bad
What was bad about it?
What size rims are those?

The truck would hit hard whenever you hit a bump and it was very bouncy..

18x8 and 20x10

68Stepbed · 08-26-2009, 10:07 AM

Here's mine with a 3.5/5 drop. 15x8" wheels 255/60/15 front, 275/60/15 rear tires.

threeonthetree · 08-26-2009, 01:06 PM

Thanks guys helps a lot!

Any longbeds out there with a 3/5

nicolas72gmc · 08-26-2009, 03:58 PM

Here is mine with a 3.5/5. All ECE components except the 1" drop front springs.

fleetimus · 08-26-2009, 04:02 PM

oldblue1968chevy · 08-26-2009, 04:51 PM

nicolas, does your truck bottom out at all and do u gotta c notch? bottom out with heavy load in bed?

nicolas72gmc · 08-26-2009, 05:02 PM

Occasionally I can hear the front tires chirp on the inner fenders when I hit a large dip in the road at higher speeds. It is probably the outer part of the front tires hitting the outer part of the inner fender. The rear has bottomed out when I had about 1000 pounds of stuff in the bed. I don't have a c-notch but would like to do one with bags one day. Overall I hardly ever bottom out. I was real suprised considering how low I went. I was expecting more bottoming out than has happened.

big_al_71 · 08-26-2009, 05:05 PM

Nick the truck came out awesome!!!!

nicolas72gmc · 08-26-2009, 05:41 PM

Thanks Albert. I just wish mine was as nice as yours!!!!

BossHogg69 · 08-26-2009, 05:51 PM

Quote:

Originally Posted by 72BLKCHEYENNE

Here is mine with a 4/5 drop.........18 in the front and 20 in the rear,
hope this helps.........rick

what size tires you running f/r? nice truck btw - dig the black and chrome with the white accents.

chevy_mike · 08-26-2009, 06:04 PM

Quote:

Originally Posted by nicolas72gmc

Here is mine with a 3.5/5. All ECE components except the 1" drop front springs.

What size tires are you running? I am assuming your wheels are 15x8 rallies.

nicolas72gmc · 08-26-2009, 06:09 PM

235/70's and 275/60's, and yes they are 15x8 rallies. I like them better bare than with the beauty rings.

C/10 King · 08-26-2009, 08:20 PM

Here's a few 3/5's

08-24-2009, 02:05 PM	#1
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	pics of trucks witha 3/5 drop? thinking about dropping my truck with a 3/5 drop from ece just getting the rear 5'' drop kit and cutting the fronts could i go with the rear 6" drop kit and still be able to cut the springs to a 4" drop? or will i need different springs for the front? or spindles i don't have disk and don't have to money to spend on new disk brakes. will it bottom out on the frame if i don't c notch? thanks __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-24-2009, 02:34 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: pics of trucks witha 3/5 drop? Here is an old pict of my truck with 3/5 drop cut springs and 5 inch in the rear...It rode like crap specially in the front the back was just fine. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-24-2009, 02:49 PM	#3
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: pics of trucks witha 3/5 drop? The front was bad What was bad about it? What size rims are those? __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-24-2009, 03:06 PM	#4
Gumby'sC20 Registered User Join Date: Jan 2009 Location: Binghamton, N.Y. Posts: 116	Re: pics of trucks witha 3/5 drop? cutting the springs on anything will decrease ride quality by a long shot, especially over time.

08-24-2009, 03:09 PM	#5
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: pics of trucks witha 3/5 drop? Any pics of long boxes? 3/5 4/6? __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-24-2009, 03:16 PM	#6
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: pics of trucks witha 3/5 drop? Well later on I'll get spindels and such so the front would be tempary. Could u chop the front to a 4" drop? __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-26-2009, 12:18 AM	#7
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: pics of trucks witha 3/5 drop? How many coils did u cut off for that drop? __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-26-2009, 02:49 AM	#8
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: pics of trucks witha 3/5 drop? dont go over three inches off the front coils __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

08-26-2009, 02:53 AM	#9
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: pics of trucks witha 3/5 drop? Yeah I know what would give me a 3 I heard one full coil before Would that do it __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-26-2009, 02:56 AM	#10
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: pics of trucks witha 3/5 drop? one full coil is generally 2. I have had alot of trucks with front cut springs and the all road great __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

08-26-2009, 03:22 AM	#11
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: pics of trucks witha 3/5 drop? Yeah as long as I get drop shocks It should be alright is what Im thinking I'll be fine So can I cut one and a half and have the spring seat right? Any pictures of a longbed or short with a 3/5 on 15inch rims __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-26-2009, 07:31 AM	#12
72BLKCHEYENNE Registered User Join Date: Oct 2005 Location: FREDERICTON, NEW BRUNSWICK CANADA Posts: 130	Re: pics of trucks witha 3/5 drop? Here is mine with a 4/5 drop.........18 in the front and 20 in the rear, hope this helps.........rick Attached Images

08-26-2009, 10:07 AM	#14
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: pics of trucks witha 3/5 drop? Here's mine with a 3.5/5 drop. 15x8" wheels 255/60/15 front, 275/60/15 rear tires. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

08-26-2009, 01:06 PM	#15
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: pics of trucks witha 3/5 drop? Thanks guys helps a lot! Any longbeds out there with a 3/5 __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

08-26-2009, 03:58 PM	#16
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: pics of trucks witha 3/5 drop? Here is mine with a 3.5/5. All ECE components except the 1" drop front springs. Attached Images __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350



Register or Log In To remove these advertisements.

08-26-2009, 04:02 PM	#17
fleetimus Registered User Join Date: Jul 2000 Location: Auburn,Ca USA Posts: 369	Re: pics of trucks witha 3/5 drop? __________________ 68 Chevy l/b, 4 whl disc in the foothills of No Calif

08-26-2009, 04:51 PM	#18
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: pics of trucks witha 3/5 drop? nicolas, does your truck bottom out at all and do u gotta c notch? bottom out with heavy load in bed? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-26-2009, 05:02 PM	#19
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: pics of trucks witha 3/5 drop? Occasionally I can hear the front tires chirp on the inner fenders when I hit a large dip in the road at higher speeds. It is probably the outer part of the front tires hitting the outer part of the inner fender. The rear has bottomed out when I had about 1000 pounds of stuff in the bed. I don't have a c-notch but would like to do one with bags one day. Overall I hardly ever bottom out. I was real suprised considering how low I went. I was expecting more bottoming out than has happened. __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

08-26-2009, 05:05 PM	#20
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: pics of trucks witha 3/5 drop? Nick the truck came out awesome!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-26-2009, 05:41 PM	#21
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: pics of trucks witha 3/5 drop? Thanks Albert. I just wish mine was as nice as yours!!!! __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

08-26-2009, 06:09 PM	#24
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: pics of trucks witha 3/5 drop? 235/70's and 275/60's, and yes they are 15x8 rallies. I like them better bare than with the beauty rings. __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

08-26-2009, 08:20 PM	#25
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: pics of trucks witha 3/5 drop? Here's a few 3/5's __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.