'63 suspension on a '62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Drop Jaw Kustoms · 08-31-2009, 09:15 AM

will it work? im new to the 62

**ChiefRocka** · 08-31-2009, 09:17 AM

Sure...change out the crossmember, and redrill some holes.

Drop Jaw Kustoms · 08-31-2009, 09:20 AM

thanks for the fast answer chief..i've built a 64 before but never a 63 so i was just needing to know this cus all the parts are 63&up

joe231 · 08-31-2009, 10:24 AM

While doing the swap you should go ahead and step up to the 73-up front crossmember with discs....

Drop Jaw Kustoms · 08-31-2009, 12:09 PM

is it the same proccess as the 64 swap cus if it is i rather go that route.....i just finished pulling the crossmember so i gotta decide so i could get that thing rolling again....

joe231 · 08-31-2009, 01:18 PM

Yes it is
'63-66 frames are all the same

Drop Jaw Kustoms · 08-31-2009, 06:09 PM

thanks joe231 for the help

joe231 · 08-31-2009, 06:13 PM

no problem and good luck!!!

post pics if you can

oh and

Drop Jaw Kustoms · 08-31-2009, 06:16 PM

ohh i will once i get started on the swap

oh yeah i sort of forgot to introduce myself....but hello to everyone if its not too late

**Captainfab** · 09-01-2009, 12:51 AM

Yeah, if you're going to all that work why not upgrade to discs?

joe231 · 09-01-2009, 08:33 AM

I think I miss-read your post, the 60-62 frames are different, but I believe all you have to do to swap in a newer cross member is drill some extra holes on the 60-62's

Drop Jaw Kustoms · 09-01-2009, 09:35 AM

yea i was at a friends shop yesterday and he has a 74 crossmember with disc brakes and i could get it at a good deal on it so i was wondering if the 62 frame is narower because of the torison bar suspension or if its the same width....

joe231 · 09-01-2009, 09:47 AM

The frames are close enough that it will work

several on here have done it
you can even get aftermarket 6 lug rotors that fit the 73-up, if you don't want to swap the rear end

Drop Jaw Kustoms · 09-01-2009, 10:56 AM

yea im planning on keeping the 12 bolt but i was reading on another thread that some spacers had to be put between the crossmember and frame

joe231 · 09-01-2009, 12:08 PM

yeah it is like anything else, take it with a grain of salt

I have heard many more people say they had no problem bolting it up than the ones saying they used spacers.

the frame will also flex some, so I wouldn't be too worried about a 1/4-3/8 of an inch difference...that is just me

on our '66 with a mid 80's cross member, when I pulled the cross member loose the frame kinda sprang out a bit...seems to be the same as most everything on these trucks...there were allowable tolerances from the factory.....no factory vehicles are perfectly the same

Drop Jaw Kustoms · 09-01-2009, 01:53 PM

Thanks for the info im gonna be heading out to my buddys shop today so ill get some measurements and maybe pick it up if its close

08-31-2009, 09:15 AM	#1
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	'63 suspension on a '62 will it work? im new to the 62

08-31-2009, 09:17 AM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,151	Re: '63 suspension on a '62 Sure...change out the crossmember, and redrill some holes. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-31-2009, 09:20 AM	#3
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	Re: '63 suspension on a '62 thanks for the fast answer chief..i've built a 64 before but never a 63 so i was just needing to know this cus all the parts are 63&up

08-31-2009, 10:24 AM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '63 suspension on a '62 While doing the swap you should go ahead and step up to the 73-up front crossmember with discs.... __________________ *CHEVY ONLY*

08-31-2009, 12:09 PM	#5
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	Re: '63 suspension on a '62 is it the same proccess as the 64 swap cus if it is i rather go that route.....i just finished pulling the crossmember so i gotta decide so i could get that thing rolling again....

08-31-2009, 01:18 PM	#6
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '63 suspension on a '62 Yes it is '63-66 frames are all the same __________________ *CHEVY ONLY*

08-31-2009, 06:09 PM	#7
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	Re: '63 suspension on a '62 thanks joe231 for the help

08-31-2009, 06:13 PM	#8
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '63 suspension on a '62 no problem and good luck!!! post pics if you can oh and __________________ *CHEVY ONLY*

08-31-2009, 06:16 PM	#9
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	Re: '63 suspension on a '62 ohh i will once i get started on the swap oh yeah i sort of forgot to introduce myself....but hello to everyone if its not too late

09-01-2009, 12:51 AM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: '63 suspension on a '62 Yeah, if you're going to all that work why not upgrade to discs? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-01-2009, 08:33 AM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '63 suspension on a '62 I think I miss-read your post, the 60-62 frames are different, but I believe all you have to do to swap in a newer cross member is drill some extra holes on the 60-62's __________________ *CHEVY ONLY*

09-01-2009, 09:35 AM	#12
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	Re: '63 suspension on a '62 yea i was at a friends shop yesterday and he has a 74 crossmember with disc brakes and i could get it at a good deal on it so i was wondering if the 62 frame is narower because of the torison bar suspension or if its the same width....

09-01-2009, 09:47 AM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '63 suspension on a '62 The frames are close enough that it will work several on here have done it you can even get aftermarket 6 lug rotors that fit the 73-up, if you don't want to swap the rear end __________________ *CHEVY ONLY*

09-01-2009, 10:56 AM	#14
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	Re: '63 suspension on a '62 yea im planning on keeping the 12 bolt but i was reading on another thread that some spacers had to be put between the crossmember and frame

09-01-2009, 12:08 PM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: '63 suspension on a '62 yeah it is like anything else, take it with a grain of salt I have heard many more people say they had no problem bolting it up than the ones saying they used spacers. the frame will also flex some, so I wouldn't be too worried about a 1/4-3/8 of an inch difference...that is just me on our '66 with a mid 80's cross member, when I pulled the cross member loose the frame kinda sprang out a bit...seems to be the same as most everything on these trucks...there were allowable tolerances from the factory.....no factory vehicles are perfectly the same __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

09-01-2009, 01:53 PM	#16
Drop Jaw Kustoms Registered User Join Date: Aug 2009 Location: miami,fl Posts: 19	Re: '63 suspension on a '62 Thanks for the info im gonna be heading out to my buddys shop today so ill get some measurements and maybe pick it up if its close

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.