TX 1972 SWB 2wd rolling chassis AUstin Texas $300 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 09-09-2009, 09:19 PM

Not much to tell... No driveshaft or e brake cables, missing caliper on one side, I forget which. Unknown gear ratio/ posi/ non posi in rear. No steering box, but I have a power box for $50 extra. Cool 80's "Hurricane" mags included. Not bent or tweaked in any way that I can tell.

**WIDESIDE72** · 09-09-2009, 09:21 PM

One tie rod end is bent from wheel getting hung up when moving the chassis (OOPS) This is a disc brake 5 lug roller, y'all!

**WIDESIDE72** · 09-09-2009, 09:22 PM

Panhard bar not shown in photos, but it has been reinstalled.

BB72CHEVKT · 09-09-2009, 09:27 PM

How are shock mounts and cab mounts? You ever head to the Tyler area? If I pay you how long do I have to get there?

**WIDESIDE72** · 09-09-2009, 09:48 PM

I will double check the mounts before swearing to it. Right now, I am trying to scrape money together to replace the dead 350 in my truck, so I don't have any way to deliver. If you wan it, it can sit were it is indefinitely. I'm not going anywhere!

BB72CHEVKT · 09-10-2009, 09:41 AM

Quote:

Originally Posted by WIDESIDE72

I will double check the mounts before swearing to it. Right now, I am trying to scrape money together to replace the dead 350 in my truck, so I don't have any way to deliver. If you wan it, it can sit were it is indefinitely. I'm not going anywhere!

Thanks. After thinking about it further I better deal with the 3 trucks I have now. Here is a bump for you.

**WIDESIDE72** · 10-05-2009, 09:17 PM

Ttt

**Clyde65** · 10-07-2009, 12:24 PM

Before you sell it, could you get cardboard paterns for me for the cut out where the motor mounts are? both sides?

**WIDESIDE72** · 10-11-2009, 08:43 PM

Sale pending with hotrod 80

**WIDESIDE72** · 10-11-2009, 08:44 PM

I do have a bare swb frame for sale. It is at my place in Leander. I also have a complete 72 1/2 ton disc brake front suspension and 5 lug rear axle (ratio not known, but it came out of a sb v8 truck) at my brother's place nw of Ft Worth. I would let it go for the same $300

**WIDESIDE72** · 10-11-2009, 08:45 PM

I can have the frame taken to NW of DFW area or suspension pieces brought to Austin area as well.

**WIDESIDE72** · 10-14-2009, 09:03 AM

Chassis sold to Hotrod 80. Pickup arrangements pending

09-09-2009, 09:19 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	1972 SWB 2wd rolling chassis AUstin Texas $300 Not much to tell... No driveshaft or e brake cables, missing caliper on one side, I forget which. Unknown gear ratio/ posi/ non posi in rear. No steering box, but I have a power box for $50 extra. Cool 80's "Hurricane" mags included. Not bent or tweaked in any way that I can tell. Attached Images

09-09-2009, 09:21 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 One tie rod end is bent from wheel getting hung up when moving the chassis (OOPS) This is a disc brake 5 lug roller, y'all!

09-09-2009, 09:22 PM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Panhard bar not shown in photos, but it has been reinstalled.

09-09-2009, 09:27 PM	#4
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 How are shock mounts and cab mounts? You ever head to the Tyler area? If I pay you how long do I have to get there? __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 09-09-2009 at 09:29 PM.

09-09-2009, 09:48 PM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 I will double check the mounts before swearing to it. Right now, I am trying to scrape money together to replace the dead 350 in my truck, so I don't have any way to deliver. If you wan it, it can sit were it is indefinitely. I'm not going anywhere!

10-05-2009, 09:17 PM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Ttt

10-07-2009, 12:24 PM	#8
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,549	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Before you sell it, could you get cardboard paterns for me for the cut out where the motor mounts are? both sides?

10-11-2009, 08:43 PM	#9
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Sale pending with hotrod 80

10-11-2009, 08:44 PM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 I do have a bare swb frame for sale. It is at my place in Leander. I also have a complete 72 1/2 ton disc brake front suspension and 5 lug rear axle (ratio not known, but it came out of a sb v8 truck) at my brother's place nw of Ft Worth. I would let it go for the same $300

10-11-2009, 08:45 PM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 I can have the frame taken to NW of DFW area or suspension pieces brought to Austin area as well.

10-14-2009, 09:03 AM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Chassis sold to Hotrod 80. Pickup arrangements pending

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.