TN 60-62 Auto Trans Mount & Drive Shaft Wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

imareiver · 09-30-2009, 11:47 AM

I need a crossmember from a 60-62 Chevy pickup which came with a powerglide. It bolts in to the X frame with 3 bolts on each end. A drive shaft from same vehicle would be great! Thanks

**DPowers** · 09-30-2009, 09:38 PM

RU keeping the powerglide or switching to something different?

imareiver · 10-01-2009, 05:34 AM

Quote:

Originally Posted by DPowers

RU keeping the powerglide or switching to something different?

My truck came with a standard transmission, thus no auto crossmember. If I get the drive shaft from someone else's truck that had a powerglide, I'll probably put in a 350 Turbo of the same length just for convenience. If not, I'll probably go with a 700r4 and have a drive shaft made up. Either way, I'm doing away with the standard trans and going with a late model automatic. So, I mainly need the crossmember! Any suggestions are appreciated.

**DPowers** · 10-01-2009, 02:45 PM

Try here for some good info.
http://persh.org/Pickup/IdeaPage.htm

imareiver · 10-01-2009, 06:42 PM

Thanks D! I checked it out and it is great info! TT

**DPowers** · 10-01-2009, 09:53 PM

Which College Grove are you in?

**DPowers** · 10-01-2009, 09:57 PM

You should also check us out over here...
http://tennesseeclassictruckclub.com\

imareiver · 10-02-2009, 03:14 PM

South of Nashville between Franklin and Murfreesboro. Where are you located? TT

**DPowers** · 10-09-2009, 09:21 PM

I am over to the east- about 35 mile east of Knoxville. 1/2 an hour from Gatlinburg. WE got several guys from the TNCTC board in your neighborhood.

ol Curt · 10-15-2009, 09:22 PM

I have a crossmember (chrome) that I was going to use in my 66 that I would let go cheap. Not sure if it fits your year or not, but it is for TH350.

**DPowers** · 10-16-2009, 07:42 PM

what is cheap?

ol Curt · 10-16-2009, 09:46 PM

$50 plus the freight. I'm going to Memphis the first weekend in December if that would help on the freight part.

**DPowers** · 10-16-2009, 11:45 PM

PM returned

09-30-2009, 11:47 AM	#1
imareiver Registered User Join Date: Aug 2009 Location: College Grove, TN Posts: 6	60-62 Auto Trans Mount & Drive Shaft Wanted I need a crossmember from a 60-62 Chevy pickup which came with a powerglide. It bolts in to the X frame with 3 bolts on each end. A drive shaft from same vehicle would be great! Thanks

09-30-2009, 09:38 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted RU keeping the powerglide or switching to something different?

10-01-2009, 02:45 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted Try here for some good info. http://persh.org/Pickup/IdeaPage.htm

10-01-2009, 06:42 PM	#5
imareiver Registered User Join Date: Aug 2009 Location: College Grove, TN Posts: 6	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted Thanks D! I checked it out and it is great info! TT

10-01-2009, 09:53 PM	#6
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted Which College Grove are you in?

10-01-2009, 09:57 PM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted You should also check us out over here... http://tennesseeclassictruckclub.com\

10-02-2009, 03:14 PM	#8
imareiver Registered User Join Date: Aug 2009 Location: College Grove, TN Posts: 6	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted South of Nashville between Franklin and Murfreesboro. Where are you located? TT Last edited by imareiver; 10-02-2009 at 03:21 PM.

10-09-2009, 09:21 PM	#9
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted I am over to the east- about 35 mile east of Knoxville. 1/2 an hour from Gatlinburg. WE got several guys from the TNCTC board in your neighborhood.

10-15-2009, 09:22 PM	#10
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted I have a crossmember (chrome) that I was going to use in my 66 that I would let go cheap. Not sure if it fits your year or not, but it is for TH350. __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down!

10-16-2009, 07:42 PM	#11
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted what is cheap?

10-16-2009, 09:46 PM	#12
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted $50 plus the freight. I'm going to Memphis the first weekend in December if that would help on the freight part. __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down! Last edited by ol Curt; 10-16-2009 at 09:50 PM.

10-16-2009, 11:45 PM	#13
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,446	Re: 60-62 Auto Trans Mount & Drive Shaft Wanted PM returned

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.