'55 2nd series carb question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

terd ferguson · 10-11-2009, 10:56 AM

Ok, stupid question here. I've got a '55 2nd series with the 235 and three on the tree. In the shop manual it says all manual tranny 1/2 tons have a GM Model "B" downdraft carb. In the parts store websites, they list carb kits for a Rochester B/C and a Carter YF. I want to assume the GM Model "B" downdraft is a Rochester. Is that correct?

Long story short, I want to rebuild the carb and want to get the right kit. Thanks for the help and thanks for this great forum.

**mr48chev** · 10-11-2009, 11:20 AM

Link to a carter yf page http://www.tocmp.com/manuals/Carbs/Carter/YF/index.htm

Rochester b/c link. http://www.carburetor.ca/carbs/tech/...r/B-index.html

After looking at those it should be pretty simple. No doubt the tag is missing of the carb (triangular shaped tag with stamped number) so it will take a bit more homework.

terd ferguson · 10-11-2009, 12:03 PM

Ok, so further reading of the shop manual says Rochester B/C is for auto tranny trucks and it has the automatic choke. My truck is a manual tranny truck with manual choke cable with a knob in the cab. Here's a link to the page in the manual...

http://chevy.oldcarmanualproject.com...5ctsm06m03.htm

10-11-2009, 10:56 AM	#1
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	'55 2nd series carb question... Ok, stupid question here. I've got a '55 2nd series with the 235 and three on the tree. In the shop manual it says all manual tranny 1/2 tons have a GM Model "B" downdraft carb. In the parts store websites, they list carb kits for a Rochester B/C and a Carter YF. I want to assume the GM Model "B" downdraft is a Rochester. Is that correct? Long story short, I want to rebuild the carb and want to get the right kit. Thanks for the help and thanks for this great forum. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks" Last edited by terd ferguson; 10-11-2009 at 10:57 AM.

10-11-2009, 11:20 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: '55 2nd series carb question... Link to a carter yf page http://www.tocmp.com/manuals/Carbs/Carter/YF/index.htm Rochester b/c link. http://www.carburetor.ca/carbs/tech/...r/B-index.html After looking at those it should be pretty simple. No doubt the tag is missing of the carb (triangular shaped tag with stamped number) so it will take a bit more homework.

10-11-2009, 12:03 PM	#3
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: '55 2nd series carb question... Ok, so further reading of the shop manual says Rochester B/C is for auto tranny trucks and it has the automatic choke. My truck is a manual tranny truck with manual choke cable with a knob in the cab. Here's a link to the page in the manual... http://chevy.oldcarmanualproject.com...5ctsm06m03.htm __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.