Who can shorten a bed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 10-14-2009, 02:53 PM

Any body know someone in the Northern Indiana area that can make a lwb bed into a swb bed?

72 cheyenne pdx · 10-14-2009, 03:21 PM

I can do it for free. I need to practice on one before I do mine.

I am actually keeping mine LWB. I just couldn't help myself. Good luck in finding some one.

TTT

Zoomin · 10-14-2009, 03:40 PM

You'll spend more money doing that than just buying a short bed in the first place. Think about it - two cuts that would have to be precise, welded up, ground down.

mclairmo · 10-14-2009, 04:50 PM

Not worth having it done, unless you can do it yourself. Buy a little 110 mig welder, take a welding and body work class at the local junior college, buy a can of Bondo and sawzall and get to it. Should not cost you much that way. Or, buy new/used short bedsides and convert.

rogergodding · 10-14-2009, 05:09 PM

Don't give in to the pressure.... keep it long

UltraBlue71 · 10-14-2009, 05:22 PM

Any good bodyman can do one,(they are getting rare tho) I know of one in Northern Mo that can do them, like everyone has mentioned, it aint cheap! I wonder what it would cost to buy 2 bedsides, a floor and the front of the bed, Ouch.... On second thought, I'd just leave it alone...

10-14-2009, 02:53 PM	#1
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Who can shorten a bed? Any body know someone in the Northern Indiana area that can make a lwb bed into a swb bed? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-14-2009, 03:21 PM	#2
72 cheyenne pdx Registered User Join Date: Nov 2006 Location: Portland Posts: 382	Re: Who can shorten a bed? I can do it for free. I need to practice on one before I do mine. I am actually keeping mine LWB. I just couldn't help myself. Good luck in finding some one. TTT Last edited by 72 cheyenne pdx; 10-14-2009 at 03:21 PM.

10-14-2009, 03:40 PM	#3
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Who can shorten a bed? You'll spend more money doing that than just buying a short bed in the first place. Think about it - two cuts that would have to be precise, welded up, ground down.

10-14-2009, 04:50 PM	#4
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: Who can shorten a bed? Not worth having it done, unless you can do it yourself. Buy a little 110 mig welder, take a welding and body work class at the local junior college, buy a can of Bondo and sawzall and get to it. Should not cost you much that way. Or, buy new/used short bedsides and convert.

10-14-2009, 05:09 PM	#5
rogergodding Registered User Join Date: Aug 2007 Location: Sachse, Texas Posts: 614	Re: Who can shorten a bed? Don't give in to the pressure.... keep it long

10-14-2009, 05:22 PM	#6
UltraBlue71 Registered User Join Date: Feb 2009 Location: OKC OK Posts: 489	Re: Who can shorten a bed? Any good bodyman can do one,(they are getting rare tho) I know of one in Northern Mo that can do them, like everyone has mentioned, it aint cheap! I wonder what it would cost to buy 2 bedsides, a floor and the front of the bed, Ouch.... On second thought, I'd just leave it alone... __________________ "You can put lipstick on a pig, sure it's pretty pig, but it's still just a PIG... 71 LWB Last edited by UltraBlue71; 10-14-2009 at 05:22 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.