Steering column question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BAGNDRAGIT · 10-16-2009, 01:28 AM

ok, so i have a buddy who has a '54 and as i told him how i shortened the column on my '67 he became curious as to if it was possible for his truck. i took a peek (it was dark) and didnt see much of a possibility.

so now i turn to the experts. is there anyway to shorten the steering column ( move the wheel closer to the dash) on this '54 half ton?

the cheaper the better obviously, but any suggestions will help.

Thanks in advance

CM

dwcsr · 10-16-2009, 02:26 AM

Cut the tube, Cut the shaft the same length weld the shaft to gether and then the tube.

I do reccomend you take the shaft out of the box to do it.

BAGNDRAGIT · 10-16-2009, 10:57 AM

ok, Thanks dwcsr, it is a fixed shaft right?

i really need to just go look at it!

nickp51chevy · 10-16-2009, 12:02 PM

Quote:

Originally Posted by dwcsr

Cut the tube, Cut the shaft the same length weld the shaft to gether and then the tube.

I do reccomend you take the shaft out of the box to do it.

Exactly what dwcsr said.

dwcsr · 10-16-2009, 03:14 PM

Quote:

Originally Posted by BAGNDRAGIT

ok, Thanks dwcsr, it is a fixed shaft right?

i really need to just go look at it!

There should be 4 bolts that take the column out of the steering box. but yes its a fix verse a 72 style shaft

BAGNDRAGIT · 10-16-2009, 11:05 PM

Quote:

Originally Posted by dwcsr

There should be 4 bolts that take the column out of the steering box. but yes its a fix verse a 72 style shaft

awesome!!! thanks for all the info.

CM

10-16-2009, 01:28 AM	#1
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Steering column question ok, so i have a buddy who has a '54 and as i told him how i shortened the column on my '67 he became curious as to if it was possible for his truck. i took a peek (it was dark) and didnt see much of a possibility. so now i turn to the experts. is there anyway to shorten the steering column ( move the wheel closer to the dash) on this '54 half ton? the cheaper the better obviously, but any suggestions will help. Thanks in advance CM __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

10-16-2009, 02:26 AM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Steering column question Cut the tube, Cut the shaft the same length weld the shaft to gether and then the tube. I do reccomend you take the shaft out of the box to do it.

10-16-2009, 10:57 AM	#3
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: Steering column question ok, Thanks dwcsr, it is a fixed shaft right? i really need to just go look at it! __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.