|
10-20-2009, 03:20 AM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: Tacoma, Wa
Posts: 24
|
Tail lighting
I am a proud owner of a 69 Chevy Stepside. But I'm not a big fan of the original tail lighting arrangements. I'm not really sure i what i want do instead though? If i could get your ideas and a few pictures to match, that would be much appreciated!
__________________
 '69 Chevy Stepside 350sbc 4speed automatic 2wd~There is nothing wrong with America that the faith, love of freedom, intelligence and energy of her citizens cannot cure. ~ Dwight D. Eisenhower Last edited by MobbinINmy69; 10-20-2009 at 03:21 AM. |
|
|
|
10-20-2009, 03:57 AM
|
#2 |
|
Registered User
Join Date: Feb 2009
Location: guntown,ms
Posts: 81
|
Re: Tail lighting
I had a set of 18 wheeler round lights in mine. They are about 5" red on one side amber on the other. I just removed my entire light bracket, cut a hole in the bottom of my stake post and bolted the in. I thought they looked alot better than the stock ones. You can get them at just about any truck stop. They work really good too. You might be able to see them in my avatar if you can blow it up to full size
|
|
|
|
|
10-20-2009, 01:34 PM
|
#3 |
|
Registered User
Join Date: Oct 2009
Location: Rio Rancho NM
Posts: 74
|
Re: Tail lighting
What I've seen, and plan on doing to my 68 is using an 80's El Camino or any Wagon as the same body as the Camino, of that era, Buick had some nice tails which will inter change.
The tails are in the bumper, and are sealed. You won't have a step, as for a trailer hitch if you tow just get a receiver hitch and modify the mounting of the hitch. Looks really clean and nice, sorry I don't have pics of one on, but could take pics of the one I'm going to use. Dave
__________________
Dave & Marilyn in Rio Rancho NM....1967 Chevrolet C-10 long step side.....250 3 spd. ..... 1968 Chevrolet C-10 long step side.....325 hp 350 4spd.....3" Exhaust....etc. 1965 Chevrolet Suburban K-10....292 4spd....cam....etc. Bow Tie Baby
Last edited by Truck Dr.; 10-20-2009 at 01:37 PM. |
|
|
|
|
10-20-2009, 09:06 PM
|
#4 |
|
Built not bought!!!!
 
Join Date: Oct 2009
Location: Lapeer, Michigan
Posts: 113
|
Re: Tail lighting
Here is a few pics of what I am doing on my 70.
   
|
|
|
|
|
10-20-2009, 09:19 PM
|
#5 |
|
Old Duffer
Join Date: Mar 2003
Location: Maine
Posts: 1,822
|
Re: Tail lighting
No pics, but the Speedway catalog has some stainless steel '37 Chevy tail lights that I mounted on an '80 stepper. They're a little smaller than stock, but add a little pizzaz to the rear corner.
__________________
'68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve." |
|
|
|
|
10-20-2009, 10:53 PM
|
#6 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Tail lighting
slomotion has the best answer IMO, to me, anything else looks funny.
Speedway or any street rod shop will have what he is describing |
|
|
|
 |
| Bookmarks |
| Tags |
| '69, 1969, chevy, stepside, tail lights |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
