60/40's with belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oklahoma · 10-26-2009, 11:51 AM

I found some seats at the junk yard this weekend and deciced to get them, and some seatbelts, wish the belts were blue, oh well.

**Palf70Step** · 10-26-2009, 01:23 PM

That looks good in there. I had the same in my 70 (I went full bench now) and the belts. They are a great and very comfortable combo!!

bluesfella · 10-26-2009, 01:40 PM

How did you do the upper seatbelt mount?

Joemomma1 · 10-26-2009, 02:47 PM

Those look nice in there. If only there was a way to cover the plastic at the bottom.

Bears63 · 10-26-2009, 02:54 PM

Looks pretty good. What were the seats out of?

Oklahoma · 10-26-2009, 03:12 PM

1) Seats are out of a 88 extended cab.
2) I just drilled a 1/2" hole and used a backer plate for the upper seatbelt bracket.
3) On the bottom of the seat is the steel support, not plastic, and I can come up with a cover to close the hole if needed.
Thanks Guys

**Captainfab** · 10-27-2009, 12:09 AM

Those look good. Those '88 and up seats are pretty comfy.

Oklahoma · 10-27-2009, 10:10 AM

Yea, they feel good

ChevySixty6 · 10-27-2009, 02:18 PM

Could you elaborate some more on the shoulder belt mount near the door frame? How did you get a backer plate behind the interior sheetmetal? I've been wanting to do this on my '66, but have yet to figure it out, other than cutting and welding.

Oklahoma · 10-27-2009, 08:58 PM

I used a 7/16" bolt, put the bolt thru the seatbelt bracket, put a nut on just tight enough to let the bracket swing loose, then a flat washer. put that assemble thru the drilled hole, reached up the inside wall, added a backer plate, flat washer, lock washer, and nut.
Will this be strong enough in an acident, only one way too tell, and I dont plan on finding out.

ChevySixty6 · 10-28-2009, 09:27 AM

Thanks. That makes sense. I thought the attachment point was a lot farther up in the corner and just couldn't figure out how you got it there. Now i need to find some seats.

Oklahoma · 10-28-2009, 10:34 AM

Im 5'-11", and I went 3'-0" from the floor and I could just reach where I needed to. If you are taller you might want to go alittle higher.

10-26-2009, 11:51 AM	#1
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	60/40's with belts I found some seats at the junk yard this weekend and deciced to get them, and some seatbelts, wish the belts were blue, oh well. Attached Images

10-26-2009, 01:23 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 60/40's with belts That looks good in there. I had the same in my 70 (I went full bench now) and the belts. They are a great and very comfortable combo!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-26-2009, 01:40 PM	#3
bluesfella Registered User Join Date: Oct 2008 Location: Tallahassee, FL Posts: 53	Re: 60/40's with belts How did you do the upper seatbelt mount? __________________ www.vancerutherford.com

10-26-2009, 02:47 PM	#4
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: 60/40's with belts Those look nice in there. If only there was a way to cover the plastic at the bottom.

10-26-2009, 02:54 PM	#5
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 60/40's with belts Looks pretty good. What were the seats out of? __________________ Mike "Bear" Shea

10-26-2009, 03:12 PM	#6
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts 1) Seats are out of a 88 extended cab. 2) I just drilled a 1/2" hole and used a backer plate for the upper seatbelt bracket. 3) On the bottom of the seat is the steel support, not plastic, and I can come up with a cover to close the hole if needed. Thanks Guys

10-27-2009, 12:09 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 60/40's with belts Those look good. Those '88 and up seats are pretty comfy. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-27-2009, 10:10 AM	#8
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts Yea, they feel good

10-27-2009, 02:18 PM	#9
ChevySixty6 Registered User Join Date: Feb 2009 Location: Topeka, Kansas Posts: 84	Re: 60/40's with belts Could you elaborate some more on the shoulder belt mount near the door frame? How did you get a backer plate behind the interior sheetmetal? I've been wanting to do this on my '66, but have yet to figure it out, other than cutting and welding. __________________ Members i've met: LiLRed66

10-27-2009, 08:58 PM	#10
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts I used a 7/16" bolt, put the bolt thru the seatbelt bracket, put a nut on just tight enough to let the bracket swing loose, then a flat washer. put that assemble thru the drilled hole, reached up the inside wall, added a backer plate, flat washer, lock washer, and nut. Will this be strong enough in an acident, only one way too tell, and I dont plan on finding out.

10-28-2009, 09:27 AM	#11
ChevySixty6 Registered User Join Date: Feb 2009 Location: Topeka, Kansas Posts: 84	Re: 60/40's with belts Thanks. That makes sense. I thought the attachment point was a lot farther up in the corner and just couldn't figure out how you got it there. Now i need to find some seats. __________________ Members i've met: LiLRed66

10-28-2009, 10:34 AM	#12
Oklahoma Registered User Join Date: Oct 2008 Location: broken arrow oklahoma Posts: 266	Re: 60/40's with belts Im 5'-11", and I went 3'-0" from the floor and I could just reach where I needed to. If you are taller you might want to go alittle higher.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.