VA 2-67/68 grilles f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 11-13-2009, 12:57 AM

both are perty good driver shape . the first one here has a small dent at bottom see pic. $150.00 shipped.

billsbowtie · 11-13-2009, 12:57 AM

billsbowtie · 11-13-2009, 12:58 AM

billsbowtie · 11-13-2009, 12:59 AM

billsbowtie · 11-13-2009, 01:00 AM

billsbowtie · 11-13-2009, 01:03 AM

this one is a little better but has a small rust hole in each lower bracket see pic. about the size of a dime or smaller $175.00 shipped.

billsbowtie · 11-13-2009, 01:04 AM

billsbowtie · 11-13-2009, 01:04 AM

mup123 · 11-13-2009, 10:13 AM

Hi,
Would you happen to have a 67-68 hood in good shape?

billsbowtie · 11-13-2009, 02:30 PM

yes i do have a good driver shape hood for $75.00 but looks like you are in canada and could not pick it up. it is to large for me to ship. sorry

mup123 · 11-13-2009, 03:01 PM

Hi,
I do live in Canada but plan to be in your area before the end of January with my pickup and transport will not be a problem. but If I buy the hood from you, I would ask you to hold it until I get there. Could you send me pics?
Thanks,
John Dooling

billsbowtie · 11-13-2009, 03:17 PM

yes i will hold it for you if you go ahead and pay for it. i will look for some pic.s.

billsbowtie · 11-13-2009, 03:20 PM

heres the hood.

billsbowtie · 11-13-2009, 03:22 PM

it has a very small amount of rust ft of hood see pic. do you need any other parts? bill

mup123 · 11-13-2009, 03:46 PM

Hi,
Is it surface rust or has it perforated the metal? Do you also have a cab that is being used for patches.I will need both sides rain gutter areas, and will bring measurements with me.
John Dooling

billsbowtie · 11-13-2009, 05:27 PM

the rust is small holes in the hood i would cut that spot out and replace it with good metel . it's good and straight everywhere else. i dont have a patch cab now but may have 1 by jan. bill

billsbowtie · 11-13-2009, 05:28 PM

i have 2 good fixable cabs 71 & 70 but no 67's right now.

**wancosc356** · 11-13-2009, 08:06 PM

Hey Bill. Do u happen to have a set of 67/68 grill hoops and headlight bezels that are dent/ding free? Prefer paintable steel ones.

billsbowtie · 11-14-2009, 01:33 AM

i have a pair of loops that i will check.

**wancosc356** · 11-18-2009, 03:35 PM

You find me any loops or headlight bezels?

billsbowtie · 11-18-2009, 11:49 PM

the loops i had extra has some rust . sorry

**wancosc356** · 11-19-2009, 12:17 AM

Its all good. Thanks.

11-13-2009, 12:57 AM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	2-67/68 grilles f/s both are perty good driver shape . the first one here has a small dent at bottom see pic. $150.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 12:57 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 12:58 AM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 12:59 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 01:00 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 01:03 AM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s this one is a little better but has a small rust hole in each lower bracket see pic. about the size of a dime or smaller $175.00 shipped. __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 01:04 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 10:13 AM	#9
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: 2-67/68 grilles f/s Hi, Would you happen to have a 67-68 hood in good shape?

11-13-2009, 02:30 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s yes i do have a good driver shape hood for $75.00 but looks like you are in canada and could not pick it up. it is to large for me to ship. sorry __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 03:01 PM	#11
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: 2-67/68 grilles f/s Hi, I do live in Canada but plan to be in your area before the end of January with my pickup and transport will not be a problem. but If I buy the hood from you, I would ask you to hold it until I get there. Could you send me pics? Thanks, John Dooling

11-13-2009, 03:17 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s yes i will hold it for you if you go ahead and pay for it. i will look for some pic.s. __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 03:20 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s heres the hood. __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 03:22 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s it has a very small amount of rust ft of hood see pic. do you need any other parts? bill __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 03:46 PM	#15
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: 2-67/68 grilles f/s Hi, Is it surface rust or has it perforated the metal? Do you also have a cab that is being used for patches.I will need both sides rain gutter areas, and will bring measurements with me. John Dooling

11-13-2009, 05:27 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s the rust is small holes in the hood i would cut that spot out and replace it with good metel . it's good and straight everywhere else. i dont have a patch cab now but may have 1 by jan. bill __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

11-13-2009, 05:28 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s i have 2 good fixable cabs 71 & 70 but no 67's right now. __________________ i have 67/72 chevy truck parts f/s.

11-13-2009, 08:06 PM	#18
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 2-67/68 grilles f/s Hey Bill. Do u happen to have a set of 67/68 grill hoops and headlight bezels that are dent/ding free? Prefer paintable steel ones. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-14-2009, 01:33 AM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s i have a pair of loops that i will check. __________________ i have 67/72 chevy truck parts f/s.

11-18-2009, 03:35 PM	#20
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 2-67/68 grilles f/s You find me any loops or headlight bezels? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

11-18-2009, 11:49 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2-67/68 grilles f/s the loops i had extra has some rust . sorry __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 11-18-2009 at 11:49 PM.

11-19-2009, 12:17 AM	#22
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 2-67/68 grilles f/s Its all good. Thanks. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.