Power Steering Rag Joint part number - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rsavage · 11-16-2009, 07:00 PM

Just as an FYI- I am doing a PS conversion on my 70 burb. I needed the correct rag joint and couldn't find the answer in past posts although there was a post that indicated that Advance Auto Parts had two listed. The correct part number for the PS box is 200 ( yes, just 200). I was able to get one locally ($32.99) instead of having to order one, wait for it to arrive, and hope it was correct. NAPA and Autozone don't list any for my 70.

Alex Hayley · 11-16-2009, 08:53 PM

I believe the correct part number for power steering is 201. Here is a link that might help.

Edit...the link might help.

http://67-72chevytrucks.com/vboard/s...d.php?t=365261

Dark Knight · 11-16-2009, 08:53 PM

Just use one from a 68-79 chevy truck. They're all the same. In 1980, the box went to metric, but I'm not 100% sure if the rag joint changed as well.

rsavage · 11-16-2009, 09:12 PM

Alex,
The 200 coupler fit the PS box correctly. I took the box with me to Advance today to test fit it and it's on the box now. That was one of the links I looked at and it was never clear whether the 200 or 201 was correct on that thread. That's why I posted the info.

11-16-2009, 07:00 PM	#1
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Power Steering Rag Joint part number Just as an FYI- I am doing a PS conversion on my 70 burb. I needed the correct rag joint and couldn't find the answer in past posts although there was a post that indicated that Advance Auto Parts had two listed. The correct part number for the PS box is 200 ( yes, just 200). I was able to get one locally ($32.99) instead of having to order one, wait for it to arrive, and hope it was correct. NAPA and Autozone don't list any for my 70.

11-16-2009, 08:53 PM	#2
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	Re: Power Steering Rag Joint part number I believe the correct part number for power steering is 201. Here is a link that might help. Edit...the link might help. http://67-72chevytrucks.com/vboard/s...d.php?t=365261 Last edited by Alex Hayley; 11-16-2009 at 09:03 PM.

11-16-2009, 08:53 PM	#3
Dark Knight Registered User Join Date: Dec 2008 Location: Pleak, Texas Posts: 420	Re: Power Steering Rag Joint part number Just use one from a 68-79 chevy truck. They're all the same. In 1980, the box went to metric, but I'm not 100% sure if the rag joint changed as well. __________________ -1967 Chevrolet Fleetside LWB- 350 V8 w/thumpr cam, NV3500, 3.08 gears, A/C, PS -1983 Chevy Silverado C1500- 383 stroker, TH400 -1989 Chevy Silverado K1500 SWB- 5.3L swap, 700R4, 3.42 gears -And a '66 Ford Mustang- 200 I6, C4 trans, rust bucket "The only thing we have to fear is fear itself." -FDR (and maybe rust too) You've gotta be able to stop and steer before you can go fast!

11-16-2009, 09:12 PM	#4
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Power Steering Rag Joint part number Alex, The 200 coupler fit the PS box correctly. I took the box with me to Advance today to test fit it and it's on the box now. That was one of the links I looked at and it was never clear whether the 200 or 201 was correct on that thread. That's why I posted the info.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.