Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-26-2009, 12:54 PM | #1 |
Registered User
Join Date: Aug 2008
Location: Mansfield, TX
Posts: 309
|
What size of metal for frame building???
Im thinking of redoing the back side of my truck with a handbuilt frame that will allow the stock two link to travel through the notched area so it will lay down all the way. What kind/size of metal are you guys using to fab up your frames with? Any pics? Thanks...
|
11-26-2009, 01:37 PM | #2 | |
Registered User
Join Date: Mar 2008
Location: Rochester NY
Posts: 133
|
Re: What size of metal for frame building???
Quote:
Last edited by independentcustoms; 11-26-2009 at 01:47 PM. |
|
11-26-2009, 02:09 PM | #3 | |
Account Suspended
Join Date: Nov 2008
Location: Prunedale California
Posts: 782
|
Re: What size of metal for frame building???
Quote:
|
|
11-26-2009, 03:07 PM | #4 |
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: What size of metal for frame building???
most people, myself included use 2x4 1/8" wall. 3/16 is overkill and is alot of added weight. All chassis company (that ive seen) use 1/8" wall box tube as well.
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
11-26-2009, 03:16 PM | #5 |
high-Tech Red Neck
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
|
Re: What size of metal for frame building???
1/8" 2x4" box tube weighs 2.6 lbs/ft
3/16" 2x4" box tube weighs 5.1 lbs/ft 1/4" 2x4" box tube weighs 7.7 lbs/ft Now on a half ton, 1/8" should be strong enough for anything you need to do, if it were a 1 ton id say go 3/16" Stock frames are 3/16" C channel, 1/8" 2x4 box tube is stronger than 1/4" 4" C channel.
__________________
"He used to be a pretty nice feller, now he's a welder!" |
11-26-2009, 06:56 PM | #6 |
Registered User
Join Date: Aug 2008
Location: Mansfield, TX
Posts: 309
|
Re: What size of metal for frame building???
Cool, thanks guys, yeah zing the back with stock rails would be easier but I want to build it up like I want it, I already have a SD notch with bags over axle but I am going to build it up to carry the bags on the stock two link and make room for arms to travel within the rails and add for the air tank etc...Ill post pics up when I get it going, thanks again!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|