Is this the tilt column that fits? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pont406 · 12-13-2009, 05:13 PM

I saw this tilt column in a van. Ignition lock was on the dash. Column was missing a turn level. Will this type of column fit in my 69 C10?

jablack · 12-13-2009, 05:21 PM

Looks like it.

VA72C10 · 12-13-2009, 06:00 PM

Can you get a picture of the bottom linkage that goes to the rag joint at the steering box? That would tell you/us for sure

msgross · 12-13-2009, 06:09 PM

it should but more than likely you will have to shorten the shaft connecting it to the steering box. those usually sell for about $125 on here...

jablack · 12-13-2009, 08:41 PM

I just joined the shaft from the van to the one from the truck, with a new rag joint. worked out good.

12-13-2009, 05:13 PM	#1
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Is this the tilt column that fits? I saw this tilt column in a van. Ignition lock was on the dash. Column was missing a turn level. Will this type of column fit in my 69 C10? Attached Images

12-13-2009, 05:21 PM	#2
jablack Classic Chevy Recycler Join Date: Dec 2007 Location: Alabama Posts: 422	Re: Is this the tilt column that fits? Looks like it. __________________ 2004 Chevrolet Trailblazer EXT 1970 Chevrolet C50 1979 Chevrolet C30 Need another 67 or 68 soon...

12-13-2009, 06:00 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Is this the tilt column that fits? Can you get a picture of the bottom linkage that goes to the rag joint at the steering box? That would tell you/us for sure __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-13-2009, 06:09 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Is this the tilt column that fits? it should but more than likely you will have to shorten the shaft connecting it to the steering box. those usually sell for about $125 on here... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 12-13-2009 at 06:09 PM.

12-13-2009, 08:41 PM	#5
jablack Classic Chevy Recycler Join Date: Dec 2007 Location: Alabama Posts: 422	Re: Is this the tilt column that fits? I just joined the shaft from the van to the one from the truck, with a new rag joint. worked out good. __________________ 2004 Chevrolet Trailblazer EXT 1970 Chevrolet C50 1979 Chevrolet C30 Need another 67 or 68 soon...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.