NY SECTIONED CROSSMEMBER complete package - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jlaird · 12-15-2009, 11:27 PM

I am selling my sectioned crossmember with everything to complete the swap. It is sectioned 1 3/8". I included a picture to show you that the bottom of the crossmember sits 1 5/8 off the ground. This is with a 29.5" tall tire and belltech 3" drop spindles and ART arms. You can go lower if you have a modified stock lower control arm with a cup welded in for the airbag. I had this setup laying frame but got ART arms which actually raised it to where it sits as you see it in the pictures. There are NO clearance issues. Everything is freshly painted or powder coated. (Dont mind the dust in the pictures!) Below is a list of what is included. Total cost is a lot more than my asking price...you do the math. All parts are brand new with 0 miles except the pitman arm and the idler arm. Those did not need replacing. Ok, here goes:

1. Crossmember itself. I will include all Grade 8 hardware for everything
2. New control arm U-bolts and nuts
3. Tubular motor mounts with rubber engine mounts.
4. Upper bag plates
5. 4 MOOG tie rod ends
6. Tie rod
7. CPP connecting sleeves
8. Idler arm and pitman arm
9 mount that connects idler arm to frame
10.Monroe Shocks
11. Shock studs
12. Upper Shock mounts

I'm asking $500 for everything.

jlaird · 12-15-2009, 11:27 PM

**kev2809** · 12-15-2009, 11:48 PM

wow, thats a smokin deal. good luck with the sale man, im sure this thing will sell quick.

texastrendz · 12-15-2009, 11:56 PM

will the factory steering shaft clear the a arm.

jlaird · 12-16-2009, 08:20 AM

I haven't gotten that far, but I've never seen a sectioned crossmember where the steering shaft cleared the arm.

jlaird · 12-16-2009, 09:19 PM

I can ship this. If you want a quote, just let me know.

Josh

**kev2809** · 12-16-2009, 09:22 PM

man i would love to take this, but im strapped for cash. would you part any of it out?

OARNGESI · 12-16-2009, 10:01 PM

Just curious i got a 4wd k5 frame would the section crossmember affect my steering more than on a normal 2wd frame

jlaird · 12-16-2009, 10:38 PM

Quote:

Originally Posted by kev2809

man i would love to take this, but im strapped for cash. would you part any of it out?

might consider it but want to try to sell it together first.

Quote:

Originally Posted by OARNGESI

Just curious i got a 4wd k5 frame would the section crossmember affect my steering more than on a normal 2wd frame

If you're just talking about the frame, then no, it would be the same as a 2wd.

**kev2809** · 12-16-2009, 11:18 PM

Quote:

Originally Posted by jlaird

might consider it but want to try to sell it together first.

ok cool, just keep us posted!

70time · 12-16-2009, 11:27 PM

hey that looks really cool what i wanted to know is who make the alum pulleys you have on your motor. thanks

70time · 12-16-2009, 11:28 PM

[QUOTE=70time;3678733]hey that looks really cool what i wanted to know is who make the alum pulleys you have on your motor. thanks

jlaird · 12-19-2009, 08:44 AM

[quote=70time;3678734]

Quote:

Originally Posted by 70time

hey that looks really cool what i wanted to know is who make the alum pulleys you have on your motor. thanks

billet specialties.

any interest out there fellas?

*mickeymouse* · 12-19-2009, 09:33 AM

I'd be interested in the cross member. I plan to run a rack though, so no steering stuff required.

Ground Pounder · 12-19-2009, 04:23 PM

Any idea what shipping would be to 11801 ? thanks,Bobby

jlaird · 12-20-2009, 11:39 AM

Quote:

Originally Posted by mickeymouse

I'd be interested in the cross member. I plan to run a rack though, so no steering stuff required.

Want a shipping quote?

Quote:

Originally Posted by Ground Pounder

Any idea what shipping would be to 11801 ? thanks,Bobby

$80 dollars shipping to 11801

jlaird · 12-21-2009, 11:06 PM

bumping this up. thanks.

Josh

lofly'a · 12-22-2009, 11:07 PM

that is a great deal, wish i was ready

Ground Pounder · 12-22-2009, 11:44 PM

If you can wait till after new years I will take them I can send you a deposit. thanks, Bobby

jlaird · 12-23-2009, 08:07 AM

yes, I'll wait. I'll send you a PM with deposit details.

Thanks,
Josh

jlaird · 12-23-2009, 11:13 PM

SOLD. Deposit received. Thanks Bobby.

12-15-2009, 11:27 PM	#1
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	SECTIONED CROSSMEMBER complete package I am selling my sectioned crossmember with everything to complete the swap. It is sectioned 1 3/8". I included a picture to show you that the bottom of the crossmember sits 1 5/8 off the ground. This is with a 29.5" tall tire and belltech 3" drop spindles and ART arms. You can go lower if you have a modified stock lower control arm with a cup welded in for the airbag. I had this setup laying frame but got ART arms which actually raised it to where it sits as you see it in the pictures. There are NO clearance issues. Everything is freshly painted or powder coated. (Dont mind the dust in the pictures!) Below is a list of what is included. Total cost is a lot more than my asking price...you do the math. All parts are brand new with 0 miles except the pitman arm and the idler arm. Those did not need replacing. Ok, here goes: 1. Crossmember itself. I will include all Grade 8 hardware for everything 2. New control arm U-bolts and nuts 3. Tubular motor mounts with rubber engine mounts. 4. Upper bag plates 5. 4 MOOG tie rod ends 6. Tie rod 7. CPP connecting sleeves 8. Idler arm and pitman arm 9 mount that connects idler arm to frame 10.Monroe Shocks 11. Shock studs 12. Upper Shock mounts I'm asking $500 for everything.

12-15-2009, 11:27 PM	#2
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: SECTIONED CROSSMEMBER complete package

12-15-2009, 11:48 PM	#3
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,144	Re: SECTIONED CROSSMEMBER complete package wow, thats a smokin deal. good luck with the sale man, im sure this thing will sell quick. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-15-2009, 11:56 PM	#4
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: SECTIONED CROSSMEMBER complete package will the factory steering shaft clear the a arm.

12-16-2009, 08:20 AM	#5
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: SECTIONED CROSSMEMBER complete package I haven't gotten that far, but I've never seen a sectioned crossmember where the steering shaft cleared the arm.

12-16-2009, 09:19 PM	#6
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: SECTIONED CROSSMEMBER complete package I can ship this. If you want a quote, just let me know. Josh

12-16-2009, 09:22 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,144	Re: SECTIONED CROSSMEMBER complete package man i would love to take this, but im strapped for cash. would you part any of it out? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-16-2009, 10:01 PM	#8
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: SECTIONED CROSSMEMBER complete package Just curious i got a 4wd k5 frame would the section crossmember affect my steering more than on a normal 2wd frame __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

12-16-2009, 11:27 PM	#11
70time Registered User Join Date: Aug 2007 Location: forked river nj Posts: 51	Re: SECTIONED CROSSMEMBER complete package hey that looks really cool what i wanted to know is who make the alum pulleys you have on your motor. thanks

12-16-2009, 11:28 PM	#12
70time Registered User Join Date: Aug 2007 Location: forked river nj Posts: 51	Re: SECTIONED CROSSMEMBER complete package [QUOTE=70time;3678733]hey that looks really cool what i wanted to know is who make the alum pulleys you have on your motor. thanks

12-19-2009, 09:33 AM	#14
mickeymouse Account Suspended Join Date: Nov 2005 Location: Where ever the Navy sends me. Posts: 116	Re: SECTIONED CROSSMEMBER complete package I'd be interested in the cross member. I plan to run a rack though, so no steering stuff required.

12-19-2009, 04:23 PM	#15
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: SECTIONED CROSSMEMBER complete package Any idea what shipping would be to 11801 ? thanks,Bobby

12-21-2009, 11:06 PM	#17
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: SECTIONED CROSSMEMBER complete package bumping this up. thanks. Josh

12-22-2009, 11:07 PM	#18
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: SECTIONED CROSSMEMBER complete package that is a great deal, wish i was ready __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project

12-22-2009, 11:44 PM	#19
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: SECTIONED CROSSMEMBER complete package If you can wait till after new years I will take them I can send you a deposit. thanks, Bobby



Register or Log In To remove these advertisements.

12-23-2009, 08:07 AM	#20
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: SECTIONED CROSSMEMBER complete package yes, I'll wait. I'll send you a PM with deposit details. Thanks, Josh

12-23-2009, 11:13 PM	#21
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: SECTIONED CROSSMEMBER complete package SOLD. Deposit received. Thanks Bobby.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.