Two questions (suspension/bodywork) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

energiesource · 12-21-2009, 09:57 PM

Hi, I have two questions about these trucks. with restoring a cab, should i sand down and primer parts before i replace sheet metal, or should i get the whole thing blasted and primered and go from there?

and for suspension, i have a LWB truck going to SWB and it has leaf springs in the rear but i want to switch to the radius arms and springs, can the cross member for the radius arms be switched out or do i need a whole different frame?

OARNGESI · 12-22-2009, 05:23 AM

Your probally better taking the cab to bare metal before starting rust repair

12-21-2009, 09:57 PM	#1
energiesource Registered User Join Date: Apr 2007 Location: Edmonton, AB, CAN Posts: 346	Two questions (suspension/bodywork) Hi, I have two questions about these trucks. with restoring a cab, should i sand down and primer parts before i replace sheet metal, or should i get the whole thing blasted and primered and go from there? and for suspension, i have a LWB truck going to SWB and it has leaf springs in the rear but i want to switch to the radius arms and springs, can the cross member for the radius arms be switched out or do i need a whole different frame?

12-22-2009, 05:23 AM	#2
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Two questions (suspension/bodywork) Your probally better taking the cab to bare metal before starting rust repair __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.