exhaust pipe location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flamingbig10 · 01-06-2010, 08:01 PM

I thinking about extending my exhaust to exit behind the rear end like I had years ago but I don't were to exit it though

bikes&bowties · 01-06-2010, 08:17 PM

I think on your truck it would look sick with like 3-3.5 inch tips exiting in front of the rear wheels at a 45 degree angle

smashingchuck · 01-06-2010, 08:42 PM

As in it won't fit between the axle and the bed or.... ?

flamingbig10 · 01-06-2010, 10:43 PM

Quote:

Originally Posted by bikes&bowties

I think on your truck it would look sick with like 3-3.5 inch tips exiting in front of the rear wheels at a 45 degree angle

maybe but my trucks a little low for side exit pipes

Pyrotechnic · 01-06-2010, 10:46 PM

Maybe make cut outs for the tips in the roll pan so you can keep the exhaust tucked.

flamingbig10 · 01-13-2010, 08:35 PM

this what I went with

Prerunner1982 · 01-13-2010, 08:51 PM

Looks good.

flamingbig10 · 01-13-2010, 09:05 PM

Thanks Jon

3r!c84 · 01-13-2010, 09:56 PM

i love it.my uncle has it like that on his 72. got any more pics of how it went over the rearend?

flamingbig10 · 01-14-2010, 12:57 AM

thanks

qu1cks1lver56 · 01-14-2010, 01:52 AM

yeah i like that, looks really good. i thought about doing that with mine, but idk yet. i think i was a set of tips at 45's but i still cant decide. how'd you have it before?

flamingbig10 · 01-14-2010, 02:05 AM

cut off at the muffler, and the first setup was dumped over the rear end before I flipped the axle

qu1cks1lver56 · 01-14-2010, 02:11 AM

oh i gotcha. kept it simple.

01-06-2010, 08:01 PM	#1
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	exhaust pipe location I thinking about extending my exhaust to exit behind the rear end like I had years ago but I don't were to exit it though __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-06-2010, 08:17 PM	#2
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: exhaust pipe location I think on your truck it would look sick with like 3-3.5 inch tips exiting in front of the rear wheels at a 45 degree angle

01-06-2010, 08:42 PM	#3
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: exhaust pipe location As in it won't fit between the axle and the bed or.... ? __________________ 78 Build Thread 4Runner Build

01-06-2010, 10:46 PM	#5
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: exhaust pipe location Maybe make cut outs for the tips in the roll pan so you can keep the exhaust tucked. __________________ 1977 GMC Sierra Grande

01-13-2010, 08:35 PM	#6
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: exhaust pipe location this what I went with __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-13-2010, 08:51 PM	#7
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: exhaust pipe location Looks good. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

01-13-2010, 09:05 PM	#8
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: exhaust pipe location Thanks Jon __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-13-2010, 09:56 PM	#9
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: exhaust pipe location i love it.my uncle has it like that on his 72. got any more pics of how it went over the rearend? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

01-14-2010, 12:57 AM	#10
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: exhaust pipe location thanks __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 04-05-2010 at 07:12 PM.

01-14-2010, 01:52 AM	#11
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: exhaust pipe location yeah i like that, looks really good. i thought about doing that with mine, but idk yet. i think i was a set of tips at 45's but i still cant decide. how'd you have it before?

01-14-2010, 02:05 AM	#12
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: exhaust pipe location cut off at the muffler, and the first setup was dumped over the rear end before I flipped the axle __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-14-2010, 02:11 AM	#13
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: exhaust pipe location oh i gotcha. kept it simple.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.