The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-11-2010, 11:01 PM   #1
wwotr
Registered User
 
wwotr's Avatar
 
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
That annoying 3rd hole!!!

Somebody has had to have come up with a way to Fill/Plug that 3rd Hole!

You know....that ANNOYING 3rd Hole in the Dash Bezel,
of some 67-72 C-10's/GMC's.
The one that's between the Speedometer and the Tach.

I'm thinking of getting a Billet Dash Bezel, but I only have 5 Gauges.
So I'm wondering if there's any one person (or Company) that has come up with a "Plug or Insert" that will fit into this Hole?

Something that is NICE LOOKING and not Trashy!
Maybe something with an emblem or Logo?

I could go out and buy a Clock or something, but quite honestly I don't wanna pop for the added expense.

So I thought I'd ask if anyone HERE had a Solution???

I've enclosed a picture of the Dash in this post.

There IS a Billet Dash Bezel that is made for only 5 Gauges, but it requires that you "CUT TABS" out of each side of the Dash.

Cut too much and you S.O.L.
Attached Images
 
__________________
Hello members...
I'd like you to know that I sold,
my 72 GMC (Ratikle),
back in November of 2011.
I don't visit the site much anymore,
but please feel free,
to drop me a private message.
RIP...."RATIKLE"

Last edited by wwotr; 01-12-2010 at 12:19 AM.
wwotr is offline   Reply With Quote
Old 01-11-2010, 11:57 PM   #2
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by wwotr View Post
Somebody has had to have come up with a way to Fill/Plug that 3rd Hole!

You know....that ANNOYING 3rd Hole in the Dash Bezel,
of some 67-72 C-10's/GMC's.
The one that's between the Speedometer and the Tach.

I'm thinking of getting a Billet Dash Bezel, but I only have 5 Gauges.
So I'm wondering if there's any one person (or Company) that has come up with a "Plug or Insert" that will fit into this Hole?

Something that is NICE LOOKING and not Trashy!
Maybe something with an emblem or Logo?

I could go out and buy a Clock or something, but quite honestly I don't wanna pop for the added expense.

So I thought I'd ask if anyone HERE had a Solution???

I've enclosed a picture of the Dash in this post.

There IS a Billet Dash Bezel that is made for only 5 Gauges, but it requires that you "CUT TABS" out of each side of the Dash.

Cut too much and you S.O.L.
How about this......

http://www.67-72chevytrucks.com/vboa...d.php?t=380699
Hart_Rod is offline   Reply With Quote
Old 01-12-2010, 12:09 AM   #3
71swb4x4
Senior Member
 
71swb4x4's Avatar
 
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
Re: That annoying 3rd hole!!!

The picture of your dash isn't posted. I am guessing it's aftermarket since you are saying the hole between the tach and the speedo. Have you looked at making a bezel out of a glove box door? Probably a bit cheaper than a billet dash, and you put the holes wherever you want.
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.
71swb4x4 is offline   Reply With Quote
Old 01-12-2010, 12:16 AM   #4
ed2552
Registered User
 
ed2552's Avatar
 
Join Date: Jan 2007
Location: Charles City IA
Posts: 1,626
Re: That annoying 3rd hole!!!

I'm guessing he means the open spot where the factory tachometer went. Could get one of those from LMC, etc. Problem solved.
__________________
'67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs
72' GMC C2500, 350, TH400(?), Dana 60
'67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST!
'65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT!
09 Yukon Denali 82k Miles 6.2L/6A
ed2552 is offline   Reply With Quote
Old 01-12-2010, 12:25 AM   #5
wwotr
Registered User
 
wwotr's Avatar
 
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
Re: That annoying 3rd hole!!!

Sorry, Forgot to post the picture.
I re-loaded it into my initial post.

I do not want to buy another Gauge to fill in the hole.
My thought process was, that there may have been a Forum Member that had designed something to Fill this hole.

Like I said, there IS a company that makes a reconfigured Bezel, in the same shape, but the Gauge Location is different, therefore you have to cut out, in 2 places on the Dash.
I don't posses the Tools, Knowledge or ambition.
I was looking for a Brushed Billet Gauge Cluster, that I can pop my old (Pro Comp) Gauges into, and "bolt it in".
The one pictured in my Post accomplishes that, but then there's that 3rd hole...ergo, my Dilemma.
Attached Images
  
__________________
Hello members...
I'd like you to know that I sold,
my 72 GMC (Ratikle),
back in November of 2011.
I don't visit the site much anymore,
but please feel free,
to drop me a private message.
RIP...."RATIKLE"
wwotr is offline   Reply With Quote
Old 01-12-2010, 12:48 AM   #6
Longhorn321
Size Matters
 
Longhorn321's Avatar
 
Join Date: Aug 2007
Location: Lyman, SC
Posts: 9,189
Re: That annoying 3rd hole!!!

I wonder how close a '67-'68 horn button would come to being the right size? Might look good with the billet. Just a thought.
__________________
"Reading the owners manual is only for quitters." Jason Harper, Bloomberg News.

...WOOOO HOOOO!!!!
Longhorn321 is offline   Reply With Quote
Old 01-12-2010, 12:58 AM   #7
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by Longhorn321 View Post
I wonder how close a '67-'68 horn button would come to being the right size? Might look good with the billet. Just a thought.
Like this, .
Attached Images
  
Hart_Rod is offline   Reply With Quote
Old 01-12-2010, 01:03 AM   #8
QKENUF4U
Senior Member
 
QKENUF4U's Avatar
 
Join Date: Jan 2005
Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA
Posts: 2,097
Re: That annoying 3rd hole!!!

lol there ya go... either do that or have a nice button machined by a shop with the BOWTIE in it or something.. dont think the cost would be to bad .....
QKENUF4U is offline   Reply With Quote
Old 01-12-2010, 02:04 AM   #9
Beuford
Registered User
 
Beuford's Avatar
 
Join Date: Oct 2009
Location: Townville,Pa
Posts: 284
Re: That annoying 3rd hole!!!

I put a vacume gage in there
Attached Images
 
Beuford is offline   Reply With Quote
Old 01-12-2010, 03:51 AM   #10
Smallz72project
Registered User
 
Smallz72project's Avatar
 
Join Date: May 2005
Location: Missoula, MT
Posts: 273
Re: That annoying 3rd hole!!!

Are you running an auto tranny? If so you could put a trans temp gauge, or exhaust temp, oil temp, fuel pressure... just a few ideas off the top of my head. This is kind of a silly idea, but what if you could find a tweater or micro speaker to put in it, or just make a BA cap, maybe machined billet or aluminum with your trucks name or something meaningful to you.

Edit* sorry I hadnt read post #5 very closely where you stated you didnt want to buy another gauge.
__________________
- 1967 Chevy C10 shortbox
- 1984 Chevy K10 "Mater"- SWB 305 manual, retired sheriffs truck, Current Frame Off Project
- 1986 Chevy K10 LWB 350/350 Daily Driver/project

Last edited by Smallz72project; 01-12-2010 at 03:54 AM. Reason: Jumped ahead of myself
Smallz72project is offline   Reply With Quote
Old 01-12-2010, 08:38 AM   #11
weircc
Registered User
 
weircc's Avatar
 
Join Date: Dec 2008
Location: richmond, MO
Posts: 794
Re: That annoying 3rd hole!!!

here is mine just a thought its a shift light
Attached Images
 
weircc is offline   Reply With Quote
Old 01-12-2010, 09:12 AM   #12
mrein3
Registered User
 
mrein3's Avatar
 
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
Re: That annoying 3rd hole!!!

I have a spare 1971 Monte Carlo cluster (same as Chevelle SS) laying around. One cold winter evening many years ago I messed around with it and a spare truck cluster. The speedo bolts right in where the truck speedo goes. The only issues is the PRND1D2 window cut out in the Monte speedo - which probably isn't cut out in a straight stick Monte speedo.

My Monte cluster was an idiot light cluster so it had a clock instead of a tach. But the tach is the same size as the clock. And since they are all the same size as each other, you could do something like Monte/Chevelle SS tach in the truck fuel gauge hole, aftermarket or other Chevrolet fuel gauge in the center truck hole, and leave the speedo where it is.

For my truck I put an aftermarket tach in the tach hole and a clock in the open hole next to the steering wheel.

Just thinking out loud...
Attached Images
    
__________________
'70 cab, '71 chassis, 383, TH350, NP205.
'71 Malibu convertible
'72 Malibu hard top
Center City, MN
mrein3 is offline   Reply With Quote
Old 01-12-2010, 09:58 AM   #13
JWall
Frequent Flyer
 
JWall's Avatar
 
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
Re: That annoying 3rd hole!!!

I dont know what all sizes they come in but if nothing else works out AutoMeter now sells clocks to match their gauges...

__________________
- Justin
76 SWB C-10 - 98 SWB C1500 (x2)
1 Owner 1976 SWB
JWall is offline   Reply With Quote
Old 01-12-2010, 11:42 AM   #14
Ackattack
Senior Member
 
Ackattack's Avatar
 
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,524
Re: That annoying 3rd hole!!!

In my dash I put a 6 autometer guages in it (tach, speedo, volt, temp, oil pressure, and fuel) For the middle hole I modified a turn signal panel (from a guage panel that didn't have the auxilary guages) So I'm using the arrows in the panel as the turn signal indicator, one dummy light for my check engine light, and I believe the other dummy light is the bright light indicator.

I'll post pictures later.
Ackattack is offline   Reply With Quote
Old 01-12-2010, 02:19 PM   #15
69GMCLonghorn
Registered User
 
69GMCLonghorn's Avatar
 
Join Date: Dec 2006
Location: Porter Ranch, CA
Posts: 978
Re: That annoying 3rd hole!!!

I just don't get why you wouldn't want more gauges. Especially on an older vehicle, I like to get all the input I can get... You know, like windshield washer fluid viscosity, PSI of antifreeze going into vs. out of the heater core, humidity of the air inside the air cleaner... just some thoughts...
69GMCLonghorn is offline   Reply With Quote
Old 01-12-2010, 03:54 PM   #16
hayhauler71
Registered User
 
hayhauler71's Avatar
 
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
Re: That annoying 3rd hole!!!

Body work it and fill it
hayhauler71 is offline   Reply With Quote
Old 01-12-2010, 03:59 PM   #17
Longhorn321
Size Matters
 
Longhorn321's Avatar
 
Join Date: Aug 2007
Location: Lyman, SC
Posts: 9,189
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by 69GMCLonghorn View Post
I just don't get why you wouldn't want more gauges. Especially on an older vehicle, I like to get all the input I can get... You know, like windshield washer fluid viscosity, PSI of antifreeze going into vs. out of the heater core, humidity of the air inside the air cleaner... just some thoughts...
__________________
"Reading the owners manual is only for quitters." Jason Harper, Bloomberg News.

...WOOOO HOOOO!!!!
Longhorn321 is offline   Reply With Quote
Old 01-12-2010, 08:40 PM   #18
wwotr
Registered User
 
wwotr's Avatar
 
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by weircc View Post
here is mine just a thought its a shift light
I like the Green Color I see in this picture.
Any shots of the whole Truck or what it's called?

Looks Wicked!!
__________________
Hello members...
I'd like you to know that I sold,
my 72 GMC (Ratikle),
back in November of 2011.
I don't visit the site much anymore,
but please feel free,
to drop me a private message.
RIP...."RATIKLE"
wwotr is offline   Reply With Quote
Old 01-12-2010, 08:42 PM   #19
wwotr
Registered User
 
wwotr's Avatar
 
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by JWall View Post
I dont know what all sizes they come in but if nothing else works out AutoMeter now sells clocks to match their gauges...

Now THATS what I'm talking about!!!
I need to research this.
I think my other Gauges are 2 1/16"

THANKS!!!
__________________
Hello members...
I'd like you to know that I sold,
my 72 GMC (Ratikle),
back in November of 2011.
I don't visit the site much anymore,
but please feel free,
to drop me a private message.
RIP...."RATIKLE"
wwotr is offline   Reply With Quote
Old 01-12-2010, 08:43 PM   #20
wwotr
Registered User
 
wwotr's Avatar
 
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by 69GMCLonghorn View Post
I just don't get why you wouldn't want more gauges. Especially on an older vehicle, I like to get all the input I can get... You know, like windshield washer fluid viscosity, PSI of antifreeze going into vs. out of the heater core, humidity of the air inside the air cleaner... just some thoughts...
If I have my Settlement it's no problem, but right now it boils down to putting out $$ that I don't have.

I DO appreciate all the input though.

I'm REALLY looking at the Auto Meter Clock if I HAVE to buy one.
__________________
Hello members...
I'd like you to know that I sold,
my 72 GMC (Ratikle),
back in November of 2011.
I don't visit the site much anymore,
but please feel free,
to drop me a private message.
RIP...."RATIKLE"
wwotr is offline   Reply With Quote
Old 01-12-2010, 08:55 PM   #21
weircc
Registered User
 
weircc's Avatar
 
Join Date: Dec 2008
Location: richmond, MO
Posts: 794
Re: That annoying 3rd hole!!!

the color is limetime green by HOK pm sent
weircc is offline   Reply With Quote
Old 01-12-2010, 10:40 PM   #22
68C15
blood type; Retumbo
 
68C15's Avatar
 
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
Re: That annoying 3rd hole!!!

a Sun Super Tach II fits in the hole nicely. plus it is periond correct IIRC.
68C15 is offline   Reply With Quote
Old 01-13-2010, 05:45 PM   #23
wwotr
Registered User
 
wwotr's Avatar
 
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by JWall View Post
I dont know what all sizes they come in but if nothing else works out AutoMeter now sells clocks to match their gauges...

Gotta say "JWall" gets the prize!!

I LOVE the idea of having a Matching Clock,
to match my other Autometer Gauges!!
__________________
Hello members...
I'd like you to know that I sold,
my 72 GMC (Ratikle),
back in November of 2011.
I don't visit the site much anymore,
but please feel free,
to drop me a private message.
RIP...."RATIKLE"
wwotr is offline   Reply With Quote
Old 01-13-2010, 07:00 PM   #24
71BB_LWB
Thread Killer!
 
71BB_LWB's Avatar
 
Join Date: Feb 2002
Location: Chandler, Arizona
Posts: 235
Re: That annoying 3rd hole!!!

I hate that hole also! So here is what I did.
http://67-72chevytrucks.com/vboard/s...5&postcount=65
__________________
71 Cheyenne SWB LS1 and auto.
http://67-72chevytrucks.com/vboard/s...d.php?t=256470
_____________________________________
If it's worth doing, it's worth doing twice...
_____________________________________
Don't Mistake Honesty for Negativity...
71BB_LWB is offline   Reply With Quote
Old 01-13-2010, 07:30 PM   #25
wwotr
Registered User
 
wwotr's Avatar
 
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
Re: That annoying 3rd hole!!!

Quote:
Originally Posted by wwotr View Post
Somebody has had to have come up with a way to Fill/Plug that 3rd Hole!

You know....that ANNOYING 3rd Hole in the Dash Bezel,
of some 67-72 C-10's/GMC's.
The one that's between the Speedometer and the Tach.

I'm thinking of getting a Billet Dash Bezel, but I only have 5 Gauges.
So I'm wondering if there's any one person (or Company) that has come up with a "Plug or Insert" that will fit into this Hole?

Something that is NICE LOOKING and not Trashy!
Maybe something with an emblem or Logo?

I could go out and buy a Clock or something, but quite honestly I don't wanna pop for the added expense.

So I thought I'd ask if anyone HERE had a Solution???

I've enclosed a picture of the Dash in this post.

There IS a Billet Dash Bezel that is made for only 5 Gauges, but it requires that you "CUT TABS" out of each side of the Dash.

Cut too much and you S.O.L.
Heres ANOTHER question..........
Speaking of Billet Dashs, I've noticed theres a fair amount of whhat I call, "Solid Billet Dash Gauge Bezels", on the Market. Designed just like our OEM Dash Gauge Clusters.

Then there are the "Billet Overlays", that just fit over your old plastic Bezel and just the trim around the edge shows.
I'd like to know if anyone here has installed either of these and if you could post your experience with them, along with photos.
Maybe some Pro's/Con's regarding the product/Installation (or BOTH).
__________________
Hello members...
I'd like you to know that I sold,
my 72 GMC (Ratikle),
back in November of 2011.
I don't visit the site much anymore,
but please feel free,
to drop me a private message.
RIP...."RATIKLE"
wwotr is offline   Reply With Quote
Reply

Bookmarks

Tags
billet, dash, gauges, insert

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com