ccsb teaser and brake question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tswore · 01-21-2010, 01:11 AM

Well, I tore into the truck tonight to get it ready for the cut on saturday. Here is the stuff I pulled, the incision area, and what is that thing in the last pic? It looks to be some kind of valve that changes the braking as the suspension moves. Enjoy!

billnorman · 01-21-2010, 07:46 AM

Rear brake proportioning and shut-off valve. If you brake hard enough with an empty bed, it is supposed to keep the rear wheels from locking up if the cab nosedives. Good idea, I don't know if it really would decrease the stopping distance, but it would let you concentrate on a panic stop without the screaming tires skidding across the pavement.

*BGRAFX* · 01-21-2010, 09:48 AM

What method are you going to use to shorten the frame? I'm trying to keep up with your build.

joe231 · 01-21-2010, 09:52 AM

Yeah, what Bill said

Progress

tswore · 01-21-2010, 10:20 AM

like this, then plate the inside. Should I do bolts too? Is the brake proportioning valve stock? Can I/Should I get rid of it?

bagged74 · 01-21-2010, 08:22 PM

you can get rid of the proportioning valve. i did it on mine

Devillusion · 05-14-2010, 09:02 PM

updates?

01-21-2010, 01:11 AM	#1
tswore built not bought Join Date: Sep 2003 Location: pocatello, idaho Posts: 160	ccsb teaser and brake question Well, I tore into the truck tonight to get it ready for the cut on saturday. Here is the stuff I pulled, the incision area, and what is that thing in the last pic? It looks to be some kind of valve that changes the braking as the suspension moves. Enjoy! Attached Images

01-21-2010, 07:46 AM	#2
billnorman Registered User Join Date: Mar 2009 Location: glen burnie md Posts: 174	Re: ccsb teaser and brake question Rear brake proportioning and shut-off valve. If you brake hard enough with an empty bed, it is supposed to keep the rear wheels from locking up if the cab nosedives. Good idea, I don't know if it really would decrease the stopping distance, but it would let you concentrate on a panic stop without the screaming tires skidding across the pavement.

01-21-2010, 09:48 AM	#3
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: ccsb teaser and brake question What method are you going to use to shorten the frame? I'm trying to keep up with your build.

01-21-2010, 09:52 AM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: ccsb teaser and brake question Yeah, what Bill said Progress __________________ *CHEVY ONLY*

01-21-2010, 10:20 AM	#5
tswore built not bought Join Date: Sep 2003 Location: pocatello, idaho Posts: 160	Re: ccsb teaser and brake question like this, then plate the inside. Should I do bolts too? Is the brake proportioning valve stock? Can I/Should I get rid of it? Attached Images

01-21-2010, 08:22 PM	#6
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: ccsb teaser and brake question you can get rid of the proportioning valve. i did it on mine

05-14-2010, 09:02 PM	#7
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: ccsb teaser and brake question updates?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.