CO WTB: Brake Booster Rod/Brake Pedal Pin - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JJanzen** · 01-29-2010, 01:53 PM

I am looking to buy the pin and associated parts that connect the brake booster arm and the brake pedal arm on a 1972 power brake setup. The pin I am looking for exists on the attached blue truck but is missing on the attached red truck pic. Shipping to Denver, CO 80209. Thanks.

Joel

drunkbus · 01-29-2010, 02:12 PM

If I have one on this, you can have it. I'll be out there Sunday and I'll check for you.

**JJanzen** · 01-29-2010, 02:14 PM

Thank you. Please let me know when you get a chance.

Joel

Duncan and son · 01-29-2010, 02:27 PM

Joel, if drunkguy doesn't have one, we do and I will send it to no charge.
Hope that helps Paul

**JJanzen** · 01-29-2010, 07:10 PM

Thanks to both of you guys...I'll let you know early next week if Drunkguy found one.

Joel

Hottrucks · 01-29-2010, 07:55 PM

dumb question but since it looks like you just put a new booster on does it come with the rods out both sides.....I have the peddle assembly to put in my truck but the booster looks like JUNK and the rods wont come out either side??? just woundering if I need to find another set up??

**JJanzen** · 02-01-2010, 12:00 PM

If I understand the question correctly, with the booster there is one rod and one boot. The other rod/bracket is part of the brake assembly. The pin that I am looking for connects the two. Hopefully that helps.

Duncan and son · 02-01-2010, 12:48 PM

J you need the pin, a tension washer and retaining clip. When all the dust clears let me know and I will send everything no charge.
Paul

drunkbus · 02-01-2010, 02:04 PM

I've got the pin, washer and clip in my pocket right now. Pm me where to ship it and I'll send it out today.

Hottrucks · 02-01-2010, 02:11 PM

ok let me see if I can clarify my question

the rod that the pin your getting does it stay with the booster or does it just slide in then the boot goes over it??

and

does the pin that pushes the master stay with the booster??

it seem like both are stuck in my booster and I dont want to be trying to get them out if they are supose to stay in it??

**JJanzen** · 02-06-2010, 09:32 AM

Hottrucks,
The rod stays with the booster.

**JJanzen** · 02-06-2010, 09:33 AM

Drunkguy,
Got the part yesterday and wanted to thank you. This board is full of good people and you are one of them!

Joel

Hottrucks · 02-06-2010, 11:44 AM

Quote:

Originally Posted by JJanzen

Hottrucks,
The rod stays with the booster.

both sides??? I was worried about the end with the loop on it I have been wiggling it for about a week and couldn't get it out...lmao!!

thanx

FRENCHBLUE72 · 02-06-2010, 12:19 PM

I could really use 2 pins with retainers if anyone still has any??

01-29-2010, 01:53 PM	#1
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	WTB: Brake Booster Rod/Brake Pedal Pin I am looking to buy the pin and associated parts that connect the brake booster arm and the brake pedal arm on a 1972 power brake setup. The pin I am looking for exists on the attached blue truck but is missing on the attached red truck pic. Shipping to Denver, CO 80209. Thanks. Joel Attached Images __________________ Blue72 Red72 Last edited by JJanzen; 01-29-2010 at 02:02 PM. Reason: To Add Pictures

01-29-2010, 02:12 PM	#2
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: WTB: Brake Booster Rod/Brake Pedal Pin If I have one on this, you can have it. I'll be out there Sunday and I'll check for you. Attached Images

01-29-2010, 02:14 PM	#3
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	Re: WTB: Brake Booster Rod/Brake Pedal Pin Thank you. Please let me know when you get a chance. Joel __________________ Blue72 Red72

01-29-2010, 02:27 PM	#4
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: WTB: Brake Booster Rod/Brake Pedal Pin Joel, if drunkguy doesn't have one, we do and I will send it to no charge. Hope that helps Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

01-29-2010, 07:10 PM	#5
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	Re: WTB: Brake Booster Rod/Brake Pedal Pin Thanks to both of you guys...I'll let you know early next week if Drunkguy found one. Joel __________________ Blue72 Red72

01-29-2010, 07:55 PM	#6
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTB: Brake Booster Rod/Brake Pedal Pin dumb question but since it looks like you just put a new booster on does it come with the rods out both sides.....I have the peddle assembly to put in my truck but the booster looks like JUNK and the rods wont come out either side??? just woundering if I need to find another set up?? __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

02-01-2010, 12:00 PM	#7
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	Re: WTB: Brake Booster Rod/Brake Pedal Pin If I understand the question correctly, with the booster there is one rod and one boot. The other rod/bracket is part of the brake assembly. The pin that I am looking for connects the two. Hopefully that helps. __________________ Blue72 Red72

02-01-2010, 12:48 PM	#8
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: WTB: Brake Booster Rod/Brake Pedal Pin J you need the pin, a tension washer and retaining clip. When all the dust clears let me know and I will send everything no charge. Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

02-01-2010, 02:04 PM	#9
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: WTB: Brake Booster Rod/Brake Pedal Pin I've got the pin, washer and clip in my pocket right now. Pm me where to ship it and I'll send it out today.

02-01-2010, 02:11 PM	#10
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTB: Brake Booster Rod/Brake Pedal Pin ok let me see if I can clarify my question the rod that the pin your getting does it stay with the booster or does it just slide in then the boot goes over it?? and does the pin that pushes the master stay with the booster?? it seem like both are stuck in my booster and I dont want to be trying to get them out if they are supose to stay in it?? Attached Images __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

02-06-2010, 09:32 AM	#11
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	Re: WTB: Brake Booster Rod/Brake Pedal Pin Hottrucks, The rod stays with the booster. __________________ Blue72 Red72

02-06-2010, 09:33 AM	#12
JJanzen Senior Member Join Date: Feb 2008 Location: Denver, CO Posts: 252	Re: WTB: Brake Booster Rod/Brake Pedal Pin Drunkguy, Got the part yesterday and wanted to thank you. This board is full of good people and you are one of them! Joel __________________ Blue72 Red72

02-06-2010, 12:19 PM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: WTB: Brake Booster Rod/Brake Pedal Pin I could really use 2 pins with retainers if anyone still has any?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.