GA 71 Project truck for sale - Gen III & 4L60E - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokinstang70 · 02-21-2010, 07:46 PM

I have a project truck I HATE to get rid of. I have been acquiring parts and getting ready to begin the restoration for nearly a year, but family obligations and finances have forced me to do so.

It is a very nice non a/c 71 c-10 that has the usual cancer (Rockers, cab corners, doors), but I have a nice set of spare front fenders and spare doors. I have a set of POL rear disc brakes, Oak wood bed kit (not installed) and a ton a extra parts for the cab and under the hood. The truck currently does not have a motor or trans installed in it.

However, I have an complete 2004 Chevrolet silverado rolling chassis with a 5.3L V8 and 4L60E setup with only 47,000 miles. The rolling chassis has everything... wiring, fuel tank, drive shaft, rear end, front suspension, rack and pinion steering, etc etc etc.

I also have all the brackets and mounts for the LS swap. Motor mounts, motor perches, and trans crossmember.

Again, I absolutely hate to get rid of this, but I think it is time.

As you can imagine, I have way more money in this than I can ever get out of it, but I do think the combination is worth every penny of $6,000. ( I'm pretty firm on that)

If you have any questions, please let me know.

I will try to post pics tomorrow of both the c-10 and the 2004 silverado.

Thanks... and please know I post this with much regret!!

jorgensensc · 02-21-2010, 08:19 PM

Is the bedwood kit for sale seperately? Please put me in line. Is it a short bed fleetside or stepside?
Shawn

meathead95 · 02-21-2010, 09:22 PM

how much for the 2004 silverado by itself?

smokinstang70 · 02-21-2010, 09:26 PM

Sorry.. forgot the details

71 shortbed, was driven back and forth to work everyday until about 3 months ago when I sold the motor and trans.

I would rather not separate any of it, unless a group wanted to get together to buy it all. I need it all gone at the same time.

Thanks

smokinstang70 · 02-23-2010, 05:16 PM

bump

jorgensensc · 02-23-2010, 07:20 PM

If you decide to sell the oak bed seperately shoot me a PM with a priced shipped to 77018 either via fedex, ups or greyhound. Thanks!

VA72C10 · 02-23-2010, 11:29 PM

sorry you have to sell. Seems like Meathead wants the 2004. How much would you want for the 71 and related parts? I'm not in a position to buy right now but you might sell both that way...

72SWBChevy · 02-27-2010, 01:56 PM

is this a fleetside or step side swb bed? I need a good condition SWB fleetside bed. Tks

02-21-2010, 07:46 PM	#1
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	71 Project truck for sale - Gen III & 4L60E I have a project truck I HATE to get rid of. I have been acquiring parts and getting ready to begin the restoration for nearly a year, but family obligations and finances have forced me to do so. It is a very nice non a/c 71 c-10 that has the usual cancer (Rockers, cab corners, doors), but I have a nice set of spare front fenders and spare doors. I have a set of POL rear disc brakes, Oak wood bed kit (not installed) and a ton a extra parts for the cab and under the hood. The truck currently does not have a motor or trans installed in it. However, I have an complete 2004 Chevrolet silverado rolling chassis with a 5.3L V8 and 4L60E setup with only 47,000 miles. The rolling chassis has everything... wiring, fuel tank, drive shaft, rear end, front suspension, rack and pinion steering, etc etc etc. I also have all the brackets and mounts for the LS swap. Motor mounts, motor perches, and trans crossmember. Again, I absolutely hate to get rid of this, but I think it is time. As you can imagine, I have way more money in this than I can ever get out of it, but I do think the combination is worth every penny of $6,000. ( I'm pretty firm on that) If you have any questions, please let me know. I will try to post pics tomorrow of both the c-10 and the 2004 silverado. Thanks... and please know I post this with much regret!! Last edited by smokinstang70; 02-21-2010 at 07:47 PM.

02-21-2010, 08:19 PM	#2
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 71 Project truck for sale - Gen III & 4L60E Is the bedwood kit for sale seperately? Please put me in line. Is it a short bed fleetside or stepside? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

02-21-2010, 09:22 PM	#3
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: 71 Project truck for sale - Gen III & 4L60E how much for the 2004 silverado by itself? __________________ 72 2wd blazer 72 swb 4x4

02-21-2010, 09:26 PM	#4
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 71 Project truck for sale - Gen III & 4L60E Sorry.. forgot the details 71 shortbed, was driven back and forth to work everyday until about 3 months ago when I sold the motor and trans. I would rather not separate any of it, unless a group wanted to get together to buy it all. I need it all gone at the same time. Thanks

02-23-2010, 05:16 PM	#5
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 71 Project truck for sale - Gen III & 4L60E bump

02-23-2010, 07:20 PM	#6
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 71 Project truck for sale - Gen III & 4L60E If you decide to sell the oak bed seperately shoot me a PM with a priced shipped to 77018 either via fedex, ups or greyhound. Thanks! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

02-23-2010, 11:29 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 71 Project truck for sale - Gen III & 4L60E sorry you have to sell. Seems like Meathead wants the 2004. How much would you want for the 71 and related parts? I'm not in a position to buy right now but you might sell both that way... __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-27-2010, 01:56 PM	#8
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 71 Project truck for sale - Gen III & 4L60E is this a fleetside or step side swb bed? I need a good condition SWB fleetside bed. Tks __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.