KS c60 tach dash

[71blksuper4x4]

Guys I have a C60 tach dash out of a 1975 or 1976 model according to the remnants of the printed circuit board. The gauges are in good shape, except the speedometer could probably be changed out as it has a little rust on it. It has the gas gauge on the tach head, and features a Vacuum gauge and Mechanical oil gauge. The downside is that the printed circuit was chewed up by some rodent and is probably not salvagable, but I seen you could get a replacement at Classic Parts of America for around $80. I feel like selling this as 73-87 is not my speciality, and doubt I will use it for anything. Rather than seeing it sit around my place for years, I am willing to let it go for $70/shipped, mainly do to it probably being around $20 to ship. I will get pics of it asap. Trevor

[too much stuff]

May be interested pending some pics. Eric

[71blksuper4x4]

Eric, working on pics right now. I took it apart to clean the housing and gauges as they were dusty. Trevor

[71blksuper4x4]

pics added. Trevor

[71blksuper4x4]

I forgot to mention, I do have the tach wiring harness from this dash, I just didn't take a pic of it. Oh, and the only clear lens I have for it in my stash that's decent is for a clock vehicle. Those are normally the dash types I pick up for these body styles. Trevor

[6872xtc]

Trevor, If you think the tach is good I would like to buy it. I could have it shipped to my work to save you some on shipping. The zip there is 81501.

[too much stuff]

Trevor, how is the housing? All the ears still intact? Is the tach head fairly clean? Thanks

[f.monroe]

I should buy one of these just so I can wire that "overspeed" light to come on at 55 . That way I can trick my son into driving slowly when he starts driving in a couple years . Frank

[71blksuper4x4]

Eric, sorry about the delay to get back to you on this. It is missing 2 of the ears, one on the left and one at the bottom right hand side. Sorry the pics didn't show the damage on the housing, not trying to hide anything. Here are better pics of the tach head which looks really clean to me, and of the damage to the housing. This was in a C60 destined for the crusher, so I had to hustle up and get it out. I have more plastic housings that I can cut those pieces missing off and send them with if they wish.





Order of inquiries: Please respond only in thread as I play fair and want everyone to be updated.

1) Eric (Toomuchstuff)
2) BigArmzz (pm'd me after Eric)
3) 6872xtc

[too much stuff]

Pics look good, i will take it. Eric

[71blksuper4x4]

Sold to Eric, thanks guys for the inquiries. Trevor

[6872xtc]

Not that I want to start anything, but I did respond first in the thread , then I PM'ed. I wasn't trying to play unfair, but thought I would PM after I had posted and let it sit. If you check times please.

[71blksuper4x4]

No, I play fair, and Eric definitely responded before anyone and said interested pending pics. That to me says, once you get pics up, I am possibly interested. So he was the first interested before anyone, as I didn't have the pictures up then. I have been a board member for plenty of years on here, and I know how the proper way to handle selling parts here. I understand you were the first to say you would for sure take it, but Eric was the first responder on this, check the replies again. Also, I did receive a message from Bigarmzz through being pm'd which he said he was interested if Eric passed which was ahead of your reply according to the time on the board. It was my mistake on not saying do not reply in pm's ahead of time. I feel I handled this from the book.

On a side note, dash was sent out today. Thanks Eric, Trevor